[Sun May  6 01:20:34 2012] Detection parameters:
  Position = (316.1, 236.4) = 17 45 29.90 -29 3 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.3 +/- 22.2
  Background counts = 149.5
  Rate = 0.003 +/- 0.0003

[Sun May  6 01:20:35 2012] Off-axis axis estimate = 4.68'
[Sun May  6 14:08:58 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:08:58 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Sun May  6 14:08:58 2012] source mask rpix=2.0, npix_max = 25, mask sum = 16, frac = 0.632
[Sun May  6 14:08:58 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 8.77"
[Mon May  7 05:17:39 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src57.ximg exists
[Mon May  7 05:17:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src57.csv
[Mon May  7 05:17:39 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src57_1.ximg exists
[Mon May  7 05:17:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src57.csv
[Mon May  7 05:17:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 05:17:42 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Mon May  7 05:17:42 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Mon May  7 05:17:42 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Tue May  8 12:13:52 2012] Warning, spatial fit 57 centroid is now closest to src. 113
[Tue May  8 12:13:53 2012] Spatial fit model total counts = 3676.290000, observed total counts = 3686.000000
[Tue May  8 12:13:53 2012] Offset between fit and detection position for source 119 = 6.253232 pixels
[Tue May  8 12:13:53 2012] Warning, changing simple spatial fit ID from 57 to 87
[Tue May  8 12:13:53 2012] 3711.689000 total counts/ 3263.080000 bgd. counts: snr = 7.853335
Spatial fit parameters:
  Offset between fit and detection position for source 119 = 6.253232 pixels
  Position = (322.0, 234.3) = 17 45 27.95 -29 3 39.0
  Extent = 17.2 (17.2-34.4)", rotation angle = 0
  Source counts = 448.6 +/- 60.9
  Background counts = 3263.1
  Rate = 0.005 +/- 0.0006
[Tue May  8 12:13:54 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:54 2012] Assessing source extent using major axis lower bound
[Tue May  8 12:13:54 2012] Source does appear to be extended
[Tue May  8 12:13:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:13:54 2012] Source is confused with source 122
[Tue May  8 12:13:54 2012] Source is confused with source 120
[Tue May  8 12:13:54 2012] Source is confused with source 113
[Thu May 10 00:04:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 00:04:04 2012] Initial guess for spatial extent in simple fitting = 17.22"
[Thu May 10 00:04:04 2012] source mask rpix=4.0, npix_max = 79, mask sum = 66, frac = 0.830
[Thu May 10 00:04:04 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 17.22"
[Fri May 11 06:42:16 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src52.ximg exists
[Fri May 11 06:42:16 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src52_1.ximg exists
[Fri May 11 06:42:16 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src52 appears to have run properly
[Fri May 11 06:42:19 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Fri May 11 06:42:19 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Fri May 11 06:42:19 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Sat May 12 00:41:54 2012] Warning, spatial fit 52 centroid is now closest to src. 6
[Sat May 12 00:41:54 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:54 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:41:54 2012] Source does appear to be extended
[Sat May 12 00:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 13 06:11:59 2012] XMMSAS src. selection expression = ellipse(27965.128000, 20331.746000, 1033.194030, 1033.194030, 0.000000, X, Y)
[Sun May 13 06:11:59 2012] Writing source region out to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src119_src.reg
[Sun May 13 06:11:59 2012] Extracting stamp from image fullrun_mos1_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (263, 175) - (381, 294)
[Sun May 13 06:11:59 2012] XMMSAS bgd. selection expression = annulus(27965.128000, 20331.746000, 1721.990050, 3443.980099, X, Y) && !ellipse(25949.510040, 22885.001400, 1652.781648, 1652.781648, 0.000000, X, Y) && !ellipse(25809.271057, 22760.044250, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24828.075980, 24186.618400, 805.824023, 805.824023, 0.000000, X, Y) && !ellipse(24051.066000, 24400.946000, 7141.776206, 7141.776206, 0.000000, X, Y) && !ellipse(25633.664764, 24050.603546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26671.730774, 22670.134338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25870.265045, 22410.175110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.777405, 23986.341217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26772.522000, 25438.655400, 2168.144062, 2168.144062, 0.000000, X, Y) && !ellipse(25710.308600, 20283.588000, 1171.344034, 1171.344034, 0.000000, X, Y) && !ellipse(27071.550000, 24518.424000, 1164.920034, 1164.920034, 0.000000, X, Y) && !ellipse(24017.756000, 22659.138000, 2528.736073, 2528.736073, 0.000000, X, Y) && !ellipse(26712.156000, 17669.457000, 497.320014, 497.320014, 0.000000, X, Y) && !ellipse(25101.552000, 20018.973600, 1425.784041, 1425.784041, 0.000000, X, Y) && !ellipse(25781.453800, 19877.304000, 1386.392040, 1386.392040, 0.000000, X, Y) && !ellipse(28141.581543, 24645.077881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26980.040000, 19981.870200, 1431.344041, 1431.344041, 0.000000, X, Y) && !ellipse(27003.528000, 19832.586000, 1431.344041, 1431.344041, 0.000000, X, Y) && !ellipse(27815.212000, 21107.678000, 823.616024, 823.616024, 0.000000, X, Y) && !ellipse(28140.786000, 25738.206000, 10091.136290, 10091.136290, 0.000000, X, Y) && !ellipse(28548.106354, 23439.707855, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 13 06:11:59 2012] Writing fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src119.gif
[Sun May 13 08:37:38 2012] Mean detx,y = (4166.87, -3117.32) 
[Sun May 13 08:37:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 13 08:38:22 2012] Binned source spectrum to 10 counts/bin
[Sun May 13 08:38:22 2012] Setting source spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src119_src_b10.pi.gz
[Sun May 13 08:38:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src119_bgd.pi.gz
[Tue May 15 01:58:30 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:30 2012] Error reading totcts from fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src119_src_b10.pi.gz
[Tue May 15 01:58:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:35 2012] Using photon index=1.80, rate=0.00461, arf fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src119.arf
[Tue May 15 01:58:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:35 2012] Updating source flux to 6e-14
[Tue May 15 01:58:49 2012] Flag c found in src. 119 procflags, skipping spectral fitting