[Sun May  6 01:20:33 2012] Detection parameters:
  Position = (261.3, 242.0) = 17 45 48.08 -29 3 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.1 +/- 29.2
  Background counts = 284.9
  Rate = 0.002 +/- 0.0003

[Sun May  6 01:20:35 2012] Off-axis axis estimate = 4.90'
[Sun May  6 14:08:58 2012] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:08:58 2012] Initial guess for spatial extent in simple fitting = 8.88"
[Sun May  6 14:08:58 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.162
[Sun May  6 14:08:58 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 8.88"
[Mon May  7 05:17:39 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src66.ximg exists
[Mon May  7 05:17:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src66.csv
[Mon May  7 05:17:39 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src66_1.ximg exists
[Mon May  7 05:17:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src66.csv
[Mon May  7 05:17:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 05:17:42 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Mon May  7 05:17:42 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Mon May  7 05:17:42 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly
[Tue May  8 12:13:52 2012] Spatial fit model total counts = 3577.070000, observed total counts = 3367.000000
[Tue May  8 12:13:52 2012] Offset between fit and detection position for source 115 = 1.758484 pixels
[Tue May  8 12:13:52 2012] Warning, changing simple spatial fit ID from 66 to 44
[Tue May  8 12:13:52 2012] 3584.164000 total counts/ 3160.000000 bgd. counts: snr = 7.545539
Spatial fit parameters:
  Offset between fit and detection position for source 115 = 1.758484 pixels
  Position = (262.7, 241.0) = 17 45 47.61 -29 3 9.8
  Extent = 17.8 (13.7-35.5)" x 10.3 (6.9-14.1)", rotation angle = 214 (189-239) degrees
  Source counts = 424.2 +/- 59.9
  Background counts = 3160.0
  Rate = 0.004 +/- 0.0006
[Tue May  8 12:13:54 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:54 2012] Assessing source extent using major axis lower bound
[Tue May  8 12:13:54 2012] Source does appear to be extended
[Tue May  8 12:13:54 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Tue May  8 12:13:54 2012] Source is confused with source 116
[Thu May 10 00:04:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 00:04:04 2012] Initial guess for spatial extent in simple fitting = 14.01"
[Thu May 10 00:04:04 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.885
[Thu May 10 00:04:04 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 14.01"
[Fri May 11 06:42:16 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src61.ximg exists
[Fri May 11 06:42:16 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src61_1.ximg exists
[Fri May 11 06:42:16 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src61 appears to have run properly
[Fri May 11 06:42:19 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Fri May 11 06:42:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src61.csv
[Fri May 11 06:42:19 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Fri May 11 06:42:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src61.csv
[Fri May 11 06:42:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:41:54 2012] Warning, spatial fit 61 centroid is now closest to src. 56
[Sat May 12 00:41:54 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:54 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:41:54 2012] Source does appear to be extended
[Sat May 12 00:41:54 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Sun May 13 06:12:01 2012] XMMSAS src. selection expression = ellipse(22810.258000, 20915.493600, 1065.054031, 616.434018, 213.674000, X, Y)
[Sun May 13 06:12:01 2012] Writing source region out to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src115_src.reg
[Sun May 13 06:12:01 2012] Extracting stamp from image fullrun_mos1_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (202, 180) - (324, 302)
[Sun May 13 06:12:01 2012] XMMSAS bgd. selection expression = annulus(22810.258000, 20915.493600, 1775.090051, 3550.180102, X, Y) && !ellipse(25949.510040, 22885.001400, 1652.781648, 1652.781648, 0.000000, X, Y) && !ellipse(25809.271057, 22760.044250, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24828.075980, 24186.618400, 805.824023, 805.824023, 0.000000, X, Y) && !ellipse(24051.066000, 24400.946000, 7141.776206, 7141.776206, 0.000000, X, Y) && !ellipse(21733.669662, 20741.126785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25633.664764, 24050.603546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26671.730774, 22670.134338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25870.265045, 22410.175110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.777405, 23986.341217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.112000, 25001.563354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23010.738000, 23211.454000, 1345.512039, 1345.512039, 0.000000, X, Y) && !ellipse(26772.522000, 25438.655400, 2168.144062, 2168.144062, 0.000000, X, Y) && !ellipse(20944.846000, 22009.116200, 1955.696056, 1955.696056, 0.000000, X, Y) && !ellipse(25710.308600, 20283.588000, 1171.344034, 1171.344034, 0.000000, X, Y) && !ellipse(23798.261800, 18826.657400, 478.563214, 478.563214, 0.000000, X, Y) && !ellipse(21425.297302, 19722.066803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27071.550000, 24518.424000, 1164.920034, 1164.920034, 0.000000, X, Y) && !ellipse(24017.756000, 22659.138000, 2528.736073, 2528.736073, 0.000000, X, Y) && !ellipse(26712.156000, 17669.457000, 497.320014, 497.320014, 0.000000, X, Y) && !ellipse(22197.608000, 21260.088000, 1472.104042, 1472.104042, 0.000000, X, Y) && !ellipse(19125.631000, 20632.028000, 1589.720046, 432.684812, 359.854000, X, Y) && !ellipse(19571.201401, 21433.539841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25101.552000, 20018.973600, 1425.784041, 1425.784041, 0.000000, X, Y) && !ellipse(20686.630000, 23037.709600, 1592.384046, 1592.384046, 0.000000, X, Y) && !ellipse(22997.864000, 20784.946000, 1420.208041, 1420.208041, 0.000000, X, Y) && !ellipse(19920.360000, 20831.466000, 648.032019, 648.032019, 0.000000, X, Y) && !ellipse(25781.453800, 19877.304000, 1386.392040, 1386.392040, 0.000000, X, Y) && !ellipse(22732.899231, 19787.547791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21730.010000, 22068.458000, 2691.024077, 2691.024077, 0.000000, X, Y) && !ellipse(22602.964000, 21840.382000, 1329.072038, 1329.072038, 0.000000, X, Y) && !ellipse(27346.452000, 25280.736000, 1158.160033, 1158.160033, 0.000000, X, Y) && !ellipse(26980.040000, 19981.870200, 1431.344041, 1431.344041, 0.000000, X, Y) && !ellipse(22657.750000, 22852.844000, 1272.632037, 1272.632037, 0.000000, X, Y) && !ellipse(20472.423218, 20642.515015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27003.528000, 19832.586000, 1431.344041, 1431.344041, 0.000000, X, Y) && !ellipse(20743.762000, 22726.098000, 1435.120041, 1435.120041, 0.000000, X, Y) && !ellipse(17442.557200, 26805.637800, 3194.496092, 462.388013, 90.000000, X, Y) && !ellipse(21381.320000, 20942.482000, 1597.248046, 798.136823, 0.000000, X, Y) && !ellipse(28140.786000, 25738.206000, 10091.136290, 10091.136290, 0.000000, X, Y) && !ellipse(21099.026000, 22898.252000, 796.192023, 796.192023, 0.000000, X, Y)
[Sun May 13 06:12:01 2012] Writing fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src115.gif
[Sun May 13 08:47:20 2012] Mean detx,y = (3410.56, 1889.03) 
[Sun May 13 08:47:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 13 08:48:12 2012] Binned source spectrum to 10 counts/bin
[Sun May 13 08:48:12 2012] Setting source spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src115_src_b10.pi.gz
[Sun May 13 08:48:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src115_bgd.pi.gz
[Tue May 15 01:58:30 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:30 2012] Error reading totcts from fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src115_src_b10.pi.gz
[Tue May 15 01:58:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:36 2012] Using photon index=1.80, rate=0.00436, arf fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src115.arf
[Tue May 15 01:58:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:36 2012] Updating source flux to 4.7e-14
[Tue May 15 01:58:49 2012] Flag c found in src. 115 procflags, skipping spectral fitting