[Sun May  6 01:20:32 2012] Detection parameters:
  Position = (249.4, 177.9) = 17 45 52.06 -29 7 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.3 +/- 21.9
  Background counts = 129.5
  Rate = 0.003 +/- 0.0004

[Sun May  6 01:20:35 2012] Off-axis axis estimate = 9.43'
[Sun May  6 14:08:58 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:08:58 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Sun May  6 14:08:58 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.960
[Sun May  6 14:08:58 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 11.15"
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src53.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src53.csv
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src53_1.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src53.csv
[Mon May  7 05:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 05:17:42 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Mon May  7 05:17:42 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Mon May  7 05:17:42 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Tue May  8 12:13:52 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 103 at 13.476906 pixels away
[Tue May  8 12:13:54 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:54 2012] Assessing source extent using major
[Tue May  8 12:13:54 2012] Source does appear to be extended
[Tue May  8 12:13:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:04:04 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:04:04 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Thu May 10 00:04:04 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.960
[Thu May 10 00:04:04 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 11.15"
[Fri May 11 06:42:16 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src48.ximg exists
[Fri May 11 06:42:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src48.csv
[Fri May 11 06:42:16 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src48_1.ximg exists
[Fri May 11 06:42:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src48.csv
[Fri May 11 06:42:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 06:42:19 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Fri May 11 06:42:19 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Fri May 11 06:42:19 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Sat May 12 00:41:54 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 103 at 10.620574 pixels away
[Sat May 12 00:41:54 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:54 2012] Assessing source extent using major
[Sat May 12 00:41:54 2012] Source does appear to be extended
[Sat May 12 00:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 13 06:11:58 2012] XMMSAS src. selection expression = ellipse(21646.097504, 15429.696869, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 13 06:11:58 2012] Writing source region out to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src103_src.reg
[Sun May 13 06:11:58 2012] Extracting stamp from image fullrun_mos1_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (212, 140) - (287, 215)
[Sun May 13 06:11:58 2012] XMMSAS bgd. selection expression = annulus(21646.097504, 15429.696869, 1087.500000, 2175.000000, X, Y) && !ellipse(24051.066000, 24400.946000, 7141.776206, 7141.776206, 0.000000, X, Y) && !ellipse(19823.516270, 15836.815483, 716.745827, 358.473948, 355.303167, X, Y) && !ellipse(28140.786000, 25738.206000, 10091.136290, 10091.136290, 0.000000, X, Y)
[Sun May 13 06:11:58 2012] Writing fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src103.gif
[Sun May 13 08:21:32 2012] Mean detx,y = (8945.06, 3249.40) 
[Sun May 13 08:21:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 13 08:22:04 2012] Binned source spectrum to 10 counts/bin
[Sun May 13 08:22:05 2012] Setting source spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Sun May 13 08:22:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src103_bgd.pi.gz
[Mon May 14 03:38:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 14 03:38:49 2012] rmf not generated due to insufficient counts
[Tue May 15 01:58:29 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:29 2012] Error reading totcts from fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Tue May 15 01:58:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:35 2012] Using photon index=1.80, rate=0.00299, arf fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src103.arf
[Tue May 15 01:58:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:35 2012] Updating source flux to 5.1e-14
[Tue May 15 01:58:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting