[Thu Apr  5 18:29:11 2012] Detection parameters:
  Position = (396.9, 294.2) = 22 14 48.58 -18 4 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.4 +/- 11.0
  Background counts = 18.6
  Rate = 0.004 +/- 0.0007

[Thu Apr  5 18:29:11 2012] Off-axis axis estimate = 7.15'
[Thu Apr  5 19:03:59 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Thu Apr  5 19:03:59 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Thu Apr  5 19:03:59 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.149
[Thu Apr  5 19:03:59 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.00"
[Thu Apr  5 19:19:02 2012] fullrun_mos2_xmm0505460501_pi300-10000_cl_pass0_src9.ximg exists
[Thu Apr  5 19:19:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460501_pi300-10000_cl_pass0_src9.csv
[Thu Apr  5 19:19:02 2012] fullrun_mos2_xmm0505460501_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Apr  5 19:19:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460501_pi300-10000_cl_pass0_src9.csv
[Thu Apr  5 19:19:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505460501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505460501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 19:19:02 2012] fullrun_mos2_xmm0505460501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Apr  5 19:19:02 2012] fullrun_mos2_xmm0505460501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Apr  5 19:19:02 2012] Fit fullrun_mos2_xmm0505460501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Apr  5 19:19:09 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.481184 pixels away
[Thu Apr  5 19:19:09 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 19:19:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 19:19:09 2012] Assessing source extent using major
[Thu Apr  5 19:19:09 2012] Source does appear to be extended
[Thu Apr  5 19:19:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 19:53:55 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Thu Apr  5 19:53:55 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Thu Apr  5 19:53:55 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.149
[Thu Apr  5 19:53:55 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.00"
[Thu Apr  5 20:10:36 2012] fullrun_mos2_xmm0505460501_pi300-10000_cl_pass1_src9.ximg exists
[Thu Apr  5 20:10:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460501_pi300-10000_cl_pass1_src9.csv
[Thu Apr  5 20:10:36 2012] fullrun_mos2_xmm0505460501_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Apr  5 20:10:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460501_pi300-10000_cl_pass1_src9.csv
[Thu Apr  5 20:10:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505460501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505460501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 20:10:36 2012] fullrun_mos2_xmm0505460501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Apr  5 20:10:36 2012] fullrun_mos2_xmm0505460501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Apr  5 20:10:36 2012] Fit fullrun_mos2_xmm0505460501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Apr  5 20:10:43 2012] Spatial fit model total counts = 179.000000, observed total counts = 179.000000
[Thu Apr  5 20:10:43 2012] Offset between fit and detection position for source 13 = 0.092347 pixels
[Thu Apr  5 20:10:43 2012] 177.140400 total counts/ 142.914000 bgd. counts: snr = 2.863016
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.092347 pixels
  Position = (396.8, 294.1) = 22 14 48.60 -18 4 54.9
  Extent = 4.6 (3.3-6.2)", rotation angle = 0
  Source counts = 34.2 +/- 13.3
  Background counts = 142.9
  Rate = 0.001 +/- 0.0005
[Thu Apr  5 20:10:43 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 20:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 20:10:43 2012] Assessing source extent using major axis lower bound
[Thu Apr  5 20:10:43 2012] Source does appear to be extended
[Thu Apr  5 20:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 20:40:25 2012] XMMSAS src. selection expression = ellipse(34475.699960, 25539.177400, 278.398788, 278.398788, 0.000000, X, Y)
[Thu Apr  5 20:40:25 2012] Writing source region out to fullrun_mos2_xmm0505460501_pi300-10000_pass1_cl_src13_src.reg
[Thu Apr  5 20:40:25 2012] Extracting stamp from image fullrun_mos2_xmm0505460501_pi300-10000_cl_sm2.00.img.gz, (381, 278) - (413, 310)
[Thu Apr  5 20:40:25 2012] XMMSAS bgd. selection expression = annulus(34475.699960, 25539.177400, 463.997979, 927.995959, X, Y)
[Thu Apr  5 20:40:25 2012] Writing fullrun_mos2_xmm0505460501_pi300-10000_pass1_cl_src13.gif
[Thu Apr  5 20:42:05 2012] Mean detx,y = (9334.59, -4280.82) 
[Thu Apr  5 20:42:06 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Apr  5 20:42:10 2012] Binned source spectrum to 10 counts/bin
[Thu Apr  5 20:42:10 2012] Setting source spectrum file to fullrun_mos2_xmm0505460501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Apr  5 20:42:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505460501_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Apr  5 20:51:02 2012] Not generating rmf since there are only 34 counts
[Thu Apr  5 20:51:02 2012] rmf not generated due to insufficient counts
[Thu Apr  5 20:52:29 2012] Updating aperture counts using extracted products
[Thu Apr  5 20:52:29 2012] Error reading totcts from fullrun_mos2_xmm0505460501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Apr  5 20:52:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Apr  5 20:52:30 2012] Using photon index=1.80, rate=0.00119, arf fullrun_mos2_xmm0505460501_pi300-10000_pass1_cl_src13.arf
[Thu Apr  5 20:52:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Apr  5 20:52:30 2012] Updating source flux to 2.9e-14
[Thu Apr  5 20:52:40 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting