[Thu Apr  5 18:28:58 2012] Detection parameters:
  Position = (479.2, 266.4) = 22 14 23.45 -18 6 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.8 +/- 10.2
  Background counts = 14.0
  Rate = 0.002 +/- 0.0003

[Thu Apr  5 18:28:58 2012] Off-axis axis estimate = 13.31'
[Thu Apr  5 18:53:10 2012] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Thu Apr  5 18:53:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Apr  5 18:53:10 2012] Initial guess for spatial extent in simple fitting = 13.09"
[Thu Apr  5 18:53:10 2012] source mask rpix=3.0, npix_max = 49, mask sum = 40, frac = 0.813
[Thu Apr  5 18:53:10 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 13.09"
[Thu Apr  5 19:03:59 2012] fullrun_mos1_xmm0505460501_pi300-10000_cl_pass0_src13.ximg exists
[Thu Apr  5 19:03:59 2012] fullrun_mos1_xmm0505460501_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Apr  5 19:03:59 2012] Fit fullrun_mos1_xmm0505460501_pi300-10000_cl_pass0_src13 appears to have run properly
[Thu Apr  5 19:03:59 2012] fullrun_mos1_xmm0505460501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Apr  5 19:03:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460501_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Apr  5 19:03:59 2012] fullrun_mos1_xmm0505460501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Apr  5 19:03:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460501_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Apr  5 19:03:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460501_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 19:19:07 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.721946 pixels away
[Thu Apr  5 19:19:07 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 19:19:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 19:19:07 2012] Assessing source extent using major
[Thu Apr  5 19:19:07 2012] Source does appear to be extended
[Thu Apr  5 19:19:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 19:41:23 2012] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Thu Apr  5 19:41:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Apr  5 19:41:23 2012] Initial guess for spatial extent in simple fitting = 13.09"
[Thu Apr  5 19:41:23 2012] source mask rpix=3.0, npix_max = 49, mask sum = 40, frac = 0.813
[Thu Apr  5 19:41:23 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 13.09"
[Thu Apr  5 19:53:55 2012] fullrun_mos1_xmm0505460501_pi300-10000_cl_pass1_src13.ximg exists
[Thu Apr  5 19:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460501_pi300-10000_cl_pass1_src13.csv
[Thu Apr  5 19:53:55 2012] fullrun_mos1_xmm0505460501_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Apr  5 19:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460501_pi300-10000_cl_pass1_src13.csv
[Thu Apr  5 19:53:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 19:53:55 2012] fullrun_mos1_xmm0505460501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Apr  5 19:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460501_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu Apr  5 19:53:55 2012] fullrun_mos1_xmm0505460501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Apr  5 19:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460501_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu Apr  5 19:53:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460501_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 20:10:41 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.644596 pixels away
[Thu Apr  5 20:10:41 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 20:10:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 20:10:41 2012] Assessing source extent using major
[Thu Apr  5 20:10:41 2012] Source does appear to be extended
[Thu Apr  5 20:10:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 20:30:31 2012] XMMSAS src. selection expression = ellipse(41646.157074, 23125.139984, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Apr  5 20:30:31 2012] Writing source region out to fullrun_mos1_xmm0505460501_pi300-10000_pass1_cl_src5_src.reg
[Thu Apr  5 20:30:31 2012] Extracting stamp from image fullrun_mos1_xmm0505460501_pi300-10000_cl_sm2.00.img.gz, (442, 229) - (517, 304)
[Thu Apr  5 20:30:31 2012] XMMSAS bgd. selection expression = annulus(41646.157074, 23125.139984, 1087.500000, 2175.000000, X, Y)
[Thu Apr  5 20:30:31 2012] Writing fullrun_mos1_xmm0505460501_pi300-10000_pass1_cl_src5.gif
[Thu Apr  5 20:32:57 2012] Mean detx,y = (-4192.59, -16931.82) 
[Thu Apr  5 20:32:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Apr  5 20:33:07 2012] Binned source spectrum to 10 counts/bin
[Thu Apr  5 20:33:07 2012] Setting source spectrum file to fullrun_mos1_xmm0505460501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Apr  5 20:33:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505460501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Apr  5 20:40:17 2012] Not generating rmf since there are only 50 counts
[Thu Apr  5 20:40:17 2012] rmf not generated due to insufficient counts
[Thu Apr  5 20:52:29 2012] Updating aperture counts using extracted products
[Thu Apr  5 20:52:29 2012] Error reading totcts from fullrun_mos1_xmm0505460501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Apr  5 20:52:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Apr  5 20:52:29 2012] Using photon index=1.80, rate=0.00172, arf fullrun_mos1_xmm0505460501_pi300-10000_pass1_cl_src5.arf
[Thu Apr  5 20:52:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Apr  5 20:52:29 2012] Updating source flux to 7.8e-14
[Thu Apr  5 20:52:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting