[Fri Mar 23 12:36:48 2012] Detection parameters:
  Position = (322.1, 345.2) = 22 14 21.21 -17 22 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.1 +/- 17.3
  Background counts = 53.9
  Rate = 0.006 +/- 0.0007

[Fri Mar 23 12:36:48 2012] Off-axis axis estimate = 3.80'
[Fri Mar 23 13:28:37 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 13:28:37 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Fri Mar 23 13:28:37 2012] source mask rpix=1.9, npix_max = 23, mask sum = 23, frac = 0.986
[Fri Mar 23 13:28:37 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.33"
[Fri Mar 23 14:00:10 2012] fullrun_mos1_xmm0505460401_pi300-10000_cl_pass0_src8.ximg exists
[Fri Mar 23 14:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460401_pi300-10000_cl_pass0_src8.csv
[Fri Mar 23 14:00:10 2012] fullrun_mos1_xmm0505460401_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Mar 23 14:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460401_pi300-10000_cl_pass0_src8.csv
[Fri Mar 23 14:00:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 14:00:10 2012] fullrun_mos1_xmm0505460401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Mar 23 14:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Mar 23 14:00:10 2012] fullrun_mos1_xmm0505460401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Mar 23 14:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Mar 23 14:00:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460401_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 14:38:51 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.323685 pixels away
[Fri Mar 23 14:38:51 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 14:38:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 14:38:51 2012] Assessing source extent using major
[Fri Mar 23 14:38:51 2012] Source does appear to be extended
[Fri Mar 23 14:38:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 15:14:38 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 15:14:38 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Fri Mar 23 15:14:38 2012] source mask rpix=1.9, npix_max = 23, mask sum = 23, frac = 0.986
[Fri Mar 23 15:14:38 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 8.33"
[Fri Mar 23 15:42:43 2012] fullrun_mos1_xmm0505460401_pi300-10000_cl_pass1_src8.ximg exists
[Fri Mar 23 15:42:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505460401_pi300-10000_cl_pass1_src8.csv
[Fri Mar 23 15:42:43 2012] fullrun_mos1_xmm0505460401_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Mar 23 15:42:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505460401_pi300-10000_cl_pass1_src8.csv
[Fri Mar 23 15:42:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 15:42:43 2012] fullrun_mos1_xmm0505460401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Mar 23 15:42:43 2012] fullrun_mos1_xmm0505460401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Mar 23 15:42:43 2012] Fit fullrun_mos1_xmm0505460401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Mar 23 16:18:58 2012] Spatial fit model total counts = 486.896000, observed total counts = 446.000000
[Fri Mar 23 16:18:58 2012] Offset between fit and detection position for source 10 = 0.236632 pixels
[Fri Mar 23 16:18:58 2012] 481.666900 total counts/ 388.680000 bgd. counts: snr = 4.716563
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.236632 pixels
  Position = (321.9, 345.4) = 22 14 21.27 -17 22 28.6
  Extent = 4.5 (3.7-6.3)", rotation angle = 0
  Source counts = 93.0 +/- 21.9
  Background counts = 388.7
  Rate = 0.003 +/- 0.0006
[Fri Mar 23 16:18:58 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 16:18:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 16:18:58 2012] Assessing source extent using major axis lower bound
[Fri Mar 23 16:18:58 2012] Source does appear to be extended
[Fri Mar 23 16:18:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 17:01:03 2012] XMMSAS src. selection expression = ellipse(27961.091560, 29997.625000, 272.822408, 272.822408, 0.000000, X, Y)
[Fri Mar 23 17:01:03 2012] Writing source region out to fullrun_mos1_xmm0505460401_pi300-10000_pass1_cl_src10_src.reg
[Fri Mar 23 17:01:03 2012] Extracting stamp from image fullrun_mos1_xmm0505460401_pi300-10000_cl_sm2.00.img.gz, (306, 330) - (338, 361)
[Fri Mar 23 17:01:03 2012] XMMSAS bgd. selection expression = annulus(27961.091560, 29997.625000, 454.704013, 909.408026, X, Y)
[Fri Mar 23 17:01:03 2012] Writing fullrun_mos1_xmm0505460401_pi300-10000_pass1_cl_src10.gif
[Fri Mar 23 17:05:47 2012] Mean detx,y = (-5941.62, -1873.35) 
[Fri Mar 23 17:05:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 23 17:06:10 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 23 17:06:10 2012] Setting source spectrum file to fullrun_mos1_xmm0505460401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Mar 23 17:06:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505460401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Mar 23 17:17:18 2012] Not generating rmf since there are only 92 counts
[Fri Mar 23 17:17:18 2012] rmf not generated due to insufficient counts
[Fri Mar 23 17:44:43 2012] Updating aperture counts using extracted products
[Fri Mar 23 17:44:43 2012] Error reading totcts from fullrun_mos1_xmm0505460401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Mar 23 17:44:44 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 23 17:44:44 2012] Using photon index=1.80, rate=0.00271, arf fullrun_mos1_xmm0505460401_pi300-10000_pass1_cl_src10.arf
[Fri Mar 23 17:44:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 23 17:44:44 2012] Updating source flux to 4.8e-14
[Fri Mar 23 17:44:48 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting