[Thu Nov 24 01:38:56 2011] Detection parameters: Position = (200.9, 237.6) = 22 17 9.00 -17 32 34.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 79.6 +/- 14.8 Background counts = 57.0 Rate = 0.002 +/- 0.0004 [Thu Nov 24 01:38:56 2011] Off-axis axis estimate = 8.33' [Thu Nov 24 01:41:18 2011] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting [Thu Nov 24 01:41:18 2011] Initial guess for spatial extent in simple fitting = 10.59" [Thu Nov 24 01:41:18 2011] source mask rpix=2.4, npix_max = 34, mask sum = 35, frac = 1.015 [Thu Nov 24 01:41:18 2011] Giving source the simple spatial ID 42 for pass 0, mean size = 10.59" [Thu Nov 24 02:57:24 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src42.ximg exists [Thu Nov 24 02:57:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src42.csv [Thu Nov 24 02:57:24 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src42_1.ximg exists [Thu Nov 24 02:57:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src42.csv [Thu Nov 24 02:57:24 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src42_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Nov 24 02:57:25 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src42.ximg exists [Thu Nov 24 02:57:25 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists [Thu Nov 24 02:57:25 2011] Fit fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly [Thu Nov 24 04:39:37 2011] Spatial fit model total counts = 545.998000, observed total counts = 546.000000 [Thu Nov 24 04:39:37 2011] Offset between fit and detection position for source 42 = 0.175950 pixels [Thu Nov 24 04:39:37 2011] 547.745100 total counts/ 518.258000 bgd. counts: snr = 1.295266 Spatial fit parameters: Offset between fit and detection position for source 42 = 0.175950 pixels Position = (200.8, 237.8) = 22 17 9.02 -17 32 35.1 Extent = 4.2 (2.6-10.4)", rotation angle = 0 Source counts = 29.5 +/- 23.4 Background counts = 518.3 Rate = 0.001 +/- 0.0008 Deleting source due to low Poisson probability