[Thu Nov 24 01:38:56 2011] Detection parameters:
  Position = (185.8, 197.0) = 22 17 13.60 -17 35 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.3 +/- 15.2
  Background counts = 54.8
  Rate = 0.002 +/- 0.0004

[Thu Nov 24 01:38:56 2011] Off-axis axis estimate = 10.99'
[Thu Nov 24 01:41:18 2011] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 01:41:18 2011] Initial guess for spatial extent in simple fitting = 11.92"
[Thu Nov 24 01:41:18 2011] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.857
[Thu Nov 24 01:41:18 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 11.92"
[Thu Nov 24 02:57:24 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src30.ximg exists
[Thu Nov 24 02:57:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src30.csv
[Thu Nov 24 02:57:24 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Nov 24 02:57:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src30.csv
[Thu Nov 24 02:57:24 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 02:57:24 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Nov 24 02:57:24 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Nov 24 02:57:24 2011] Fit fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Thu Nov 24 04:39:37 2011] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 12.701466 pixels away
[Thu Nov 24 04:39:37 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 04:39:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 04:39:37 2011] Assessing source extent using major
[Thu Nov 24 04:39:37 2011] Source does appear to be extended
[Thu Nov 24 04:39:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 04:39:53 2011] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 04:39:53 2011] Initial guess for spatial extent in simple fitting = 11.92"
[Thu Nov 24 04:39:53 2011] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.857
[Thu Nov 24 04:39:53 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 11.92"
[Thu Nov 24 05:51:16 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_src30.ximg exists
[Thu Nov 24 05:51:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_src30.csv
[Thu Nov 24 05:51:16 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_src30_1.ximg exists
[Thu Nov 24 05:51:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_src30.csv
[Thu Nov 24 05:51:16 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 05:51:17 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Thu Nov 24 05:51:17 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Thu Nov 24 05:51:17 2011] Fit fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Thu Nov 24 07:40:07 2011] Spatial fit model total counts = 598.214000, observed total counts = 598.000000
[Thu Nov 24 07:40:07 2011] Offset between fit and detection position for source 30 = 6.680576 pixels
[Thu Nov 24 07:40:07 2011] 577.748000 total counts/ 321.782000 bgd. counts: snr = 14.269259
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 6.680576 pixels
  Position = (185.7, 203.7) = 22 17 13.64 -17 35 3.5
  Extent = 23.8 (23.8-47.7)", rotation angle = 0
  Source counts = 256.0 +/- 24.0
  Background counts = 321.8
  Rate = 0.009 +/- 0.0008
[Thu Nov 24 07:40:07 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 07:40:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 07:40:07 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 07:40:07 2011] Source does appear to be extended
[Thu Nov 24 07:40:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 07:40:25 2011] XMMSAS src. selection expression = ellipse(16107.708280, 17669.220000, 1430.766041, 1430.766041, 0.000000, X, Y)
[Thu Nov 24 07:40:25 2011] Writing source region out to fullrun_pn_xmm0505460301_pi300-10000_pass1_cl_src30_src.reg
[Thu Nov 24 07:40:25 2011] Extracting stamp from image fullrun_pn_xmm0505460301_pi300-10000_cl_sm2.00.img.gz, (103, 121) - (268, 286)
[Thu Nov 24 07:40:25 2011] XMMSAS bgd. selection expression = annulus(16107.708280, 17669.220000, 2384.610069, 4769.220137, X, Y)
[Thu Nov 24 07:40:25 2011] Writing fullrun_pn_xmm0505460301_pi300-10000_pass1_cl_src30.gif
[Thu Nov 24 08:12:46 2011] Mean detx,y = (-6808.47, 12881.06) 
[Thu Nov 24 08:12:49 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 08:13:46 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 08:13:46 2011] Setting source spectrum file to fullrun_pn_xmm0505460301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Nov 24 08:13:46 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505460301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Thu Nov 24 10:28:02 2011] Updating aperture counts using extracted products
[Thu Nov 24 10:28:02 2011] Error reading totcts from fullrun_pn_xmm0505460301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Nov 24 10:28:03 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 10:28:03 2011] Using photon index=1.80, rate=0.00889, arf fullrun_pn_xmm0505460301_pi300-10000_pass1_cl_src30.arf
[Thu Nov 24 10:28:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 10:28:03 2011] Updating source flux to 5.4e-14