[Thu Nov 24 01:38:56 2011] Detection parameters:
  Position = (239.3, 315.1) = 22 16 57.32 -17 27 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.5 +/- 22.9
  Background counts = 126.5
  Rate = 0.007 +/- 0.001

[Thu Nov 24 01:38:56 2011] Off-axis axis estimate = 4.45'
[Thu Nov 24 01:41:18 2011] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 01:41:18 2011] Initial guess for spatial extent in simple fitting = 8.66"
[Thu Nov 24 01:41:18 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.008
[Thu Nov 24 01:41:18 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 8.66"
[Thu Nov 24 02:57:24 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src23.ximg exists
[Thu Nov 24 02:57:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src23.csv
[Thu Nov 24 02:57:24 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Nov 24 02:57:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src23.csv
[Thu Nov 24 02:57:24 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 02:57:24 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Nov 24 02:57:24 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Nov 24 02:57:24 2011] Fit fullrun_pn_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Nov 24 04:39:37 2011] Source 23 is offset by 4.403058 and -6.095693 pixels which is larger than
2 X fitted extent = 2.626841 x 2.626841, not incorporating fit results
[Thu Nov 24 04:39:37 2011] Source 23 is offset by 4.498277 and -2.677854 pixels which is larger than
2 X fitted extent = 1.702589 x 1.702589, not incorporating fit results
[Thu Nov 24 04:39:37 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 04:39:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 04:39:37 2011] Assessing source extent using major
[Thu Nov 24 04:39:37 2011] Source does appear to be extended
[Thu Nov 24 04:39:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 04:39:37 2011] Source is confused with source 34
[Thu Nov 24 04:39:53 2011] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 04:39:53 2011] Initial guess for spatial extent in simple fitting = 8.66"
[Thu Nov 24 04:39:53 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.008
[Thu Nov 24 04:39:53 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 8.66"
[Thu Nov 24 05:51:16 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_src23.ximg exists
[Thu Nov 24 05:51:16 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Nov 24 05:51:16 2011] Fit fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_src23 appears to have run properly
[Thu Nov 24 05:51:17 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Nov 24 05:51:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src23.csv
[Thu Nov 24 05:51:17 2011] fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Nov 24 05:51:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src23.csv
[Thu Nov 24 05:51:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 07:40:07 2011] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 29.621386 pixels away
[Thu Nov 24 07:40:07 2011] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 22.796145 pixels away
[Thu Nov 24 07:40:07 2011] Source 23 is offset by 4.497748 and -2.658314 pixels which is larger than
2 X fitted extent = 1.701476 x 1.701476, not incorporating fit results
[Thu Nov 24 07:40:07 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 07:40:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 07:40:07 2011] Assessing source extent using major
[Thu Nov 24 07:40:07 2011] Source does appear to be extended
[Thu Nov 24 07:40:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 07:40:25 2011] XMMSAS src. selection expression = ellipse(20769.732071, 27363.028717, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Nov 24 07:40:25 2011] Writing source region out to fullrun_pn_xmm0505460301_pi300-10000_pass1_cl_src23_src.reg
[Thu Nov 24 07:40:25 2011] Extracting stamp from image fullrun_pn_xmm0505460301_pi300-10000_cl_sm2.00.img.gz, (202, 278) - (277, 353)
[Thu Nov 24 07:40:25 2011] XMMSAS bgd. selection expression = annulus(20769.732071, 27363.028717, 1087.500000, 2175.000000, X, Y) && !ellipse(20873.525000, 29212.147600, 3037.128087, 3037.128087, 0.000000, X, Y) && !ellipse(19376.586000, 29937.710000, 1486.792043, 1486.792043, 0.000000, X, Y) && !ellipse(21797.922000, 30915.612000, 1462.728042, 1462.728042, 0.000000, X, Y) && !ellipse(22430.918000, 27498.450000, 1328.464038, 1328.464038, 0.000000, X, Y) && !ellipse(18087.986000, 27813.604000, 1529.456044, 1529.456044, 0.000000, X, Y) && !ellipse(20985.927124, 26861.087463, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 07:40:25 2011] Writing fullrun_pn_xmm0505460301_pi300-10000_pass1_cl_src23.gif
[Thu Nov 24 08:07:56 2011] Mean detx,y = (-6420.82, 2064.67) 
[Thu Nov 24 08:07:59 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 08:08:13 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 08:08:13 2011] Setting source spectrum file to fullrun_pn_xmm0505460301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Nov 24 08:08:13 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505460301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Nov 24 08:38:52 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Nov 24 08:38:52 2011] rmf not generated due to insufficient counts
[Thu Nov 24 10:28:01 2011] Updating aperture counts using extracted products
[Thu Nov 24 10:28:01 2011] Error reading totcts from fullrun_pn_xmm0505460301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Nov 24 10:28:03 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 10:28:03 2011] Using photon index=1.80, rate=0.00678, arf fullrun_pn_xmm0505460301_pi300-10000_pass1_cl_src23.arf
[Thu Nov 24 10:28:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 10:28:03 2011] Updating source flux to 2.6e-14
[Thu Nov 24 10:31:08 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting