[Thu Nov 24 01:39:25 2011] Detection parameters:
  Position = (247.8, 318.2) = 22 16 54.74 -17 26 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.4 +/- 18.9
  Background counts = 78.9
  Rate = 0.004 +/- 0.0006

[Thu Nov 24 01:39:25 2011] Off-axis axis estimate = 3.95'
[Thu Nov 24 04:07:40 2011] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 04:07:40 2011] Initial guess for spatial extent in simple fitting = 8.40"
[Thu Nov 24 04:07:40 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.057
[Thu Nov 24 04:07:40 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 8.40"
[Thu Nov 24 04:39:27 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src13.ximg exists
[Thu Nov 24 04:39:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src13.csv
[Thu Nov 24 04:39:27 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Nov 24 04:39:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src13.csv
[Thu Nov 24 04:39:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 04:39:27 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Nov 24 04:39:28 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Nov 24 04:39:28 2011] Fit fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Nov 24 04:39:45 2011] Spatial fit model total counts = 995.186000, observed total counts = 995.000000
[Thu Nov 24 04:39:45 2011] Offset between fit and detection position for source 17 = 8.612141 pixels
[Thu Nov 24 04:39:45 2011] 1080.822000 total counts/ 854.078000 bgd. counts: snr = 7.758666
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 8.612141 pixels
  Position = (242.7, 311.3) = 22 16 56.28 -17 27 15.5
  Extent = 16.8 (16.8-33.6)", rotation angle = 0
  Source counts = 226.7 +/- 32.9
  Background counts = 854.1
  Rate = 0.007 +/- 0.001
[Thu Nov 24 04:39:45 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 04:39:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 04:39:45 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 04:39:45 2011] Source does appear to be extended
[Thu Nov 24 04:39:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 07:11:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 07:11:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 07:11:37 2011] Initial guess for spatial extent in simple fitting = 16.80"
[Thu Nov 24 07:11:37 2011] source mask rpix=3.9, npix_max = 76, mask sum = 75, frac = 0.985
[Thu Nov 24 07:11:37 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 16.80"
[Thu Nov 24 07:40:01 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src13.ximg exists
[Thu Nov 24 07:40:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src13.csv
[Thu Nov 24 07:40:01 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Nov 24 07:40:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src13.csv
[Thu Nov 24 07:40:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 07:40:01 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Nov 24 07:40:01 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Nov 24 07:40:01 2011] Fit fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Nov 24 07:40:14 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.886468 pixels away
[Thu Nov 24 07:40:14 2011] Source 17 is offset by -3.121931 and -9.188184 pixels which is larger than
2 X fitted extent = 4.901196 x 4.901196, not incorporating fit results
[Thu Nov 24 07:40:14 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 07:40:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 07:40:14 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 07:40:14 2011] Source does appear to be extended
[Thu Nov 24 07:40:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 09:43:44 2011] XMMSAS src. selection expression = ellipse(21066.354000, 27032.414000, 1008.132029, 1008.132029, 0.000000, X, Y)
[Thu Nov 24 09:43:44 2011] Writing source region out to fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src17_src.reg
[Thu Nov 24 09:43:44 2011] Extracting stamp from image fullrun_mos2_xmm0505460301_pi300-10000_cl_sm2.00.img.gz, (185, 253) - (301, 369)
[Thu Nov 24 09:43:44 2011] XMMSAS bgd. selection expression = annulus(21066.354000, 27032.414000, 1680.220048, 3360.440097, X, Y) && !ellipse(20788.117610, 29238.611820, 1044.368030, 1044.368030, 0.000000, X, Y) && !ellipse(21998.542000, 29267.526000, 1319.920038, 1319.920038, 0.000000, X, Y) && !ellipse(21190.556000, 30473.432000, 1482.304043, 1482.304043, 0.000000, X, Y) && !ellipse(19756.678000, 28790.090000, 1475.184042, 1475.184042, 0.000000, X, Y) && !ellipse(19539.171127, 27970.013550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22186.149048, 30716.240448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22596.050000, 29209.836000, 1080.344031, 1080.344031, 0.000000, X, Y) && !ellipse(23258.823364, 29810.729431, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 09:43:44 2011] Writing fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src17.gif
[Thu Nov 24 09:49:15 2011] Mean detx,y = (6083.17, -2334.23) 
[Thu Nov 24 09:49:16 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 09:49:35 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 09:49:35 2011] Setting source spectrum file to fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Nov 24 09:49:35 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Nov 24 10:28:06 2011] Updating aperture counts using extracted products
[Thu Nov 24 10:28:06 2011] Error reading totcts from fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Nov 24 10:28:06 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 10:28:06 2011] Using photon index=1.80, rate=0.00682, arf fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src17.arf
[Thu Nov 24 10:28:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 10:28:06 2011] Updating source flux to 9.2e-14
[Thu Nov 24 10:29:46 2011] Flag b found in src. 17 procflags, skipping spectral fitting