[Thu Nov 24 01:39:25 2011] Detection parameters:
  Position = (225.3, 330.1) = 22 17 1.58 -17 25 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.1 +/- 20.7
  Background counts = 75.5
  Rate = 0.006 +/- 0.0008

[Thu Nov 24 01:39:25 2011] Off-axis axis estimate = 5.78'
[Thu Nov 24 04:07:40 2011] Using EEF radius (= 9.32 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 04:07:40 2011] Initial guess for spatial extent in simple fitting = 9.32"
[Thu Nov 24 04:07:40 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.074
[Thu Nov 24 04:07:40 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 9.32"
[Thu Nov 24 04:39:27 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src7.ximg exists
[Thu Nov 24 04:39:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src7.csv
[Thu Nov 24 04:39:27 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Nov 24 04:39:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src7.csv
[Thu Nov 24 04:39:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 04:39:27 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Nov 24 04:39:27 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Nov 24 04:39:27 2011] Fit fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Nov 24 04:39:45 2011] Source 14 is offset by -8.307794 and -4.185324 pixels which is larger than
2 X fitted extent = 7.905012 x 7.905012, not incorporating fit results
[Thu Nov 24 04:39:45 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 04:39:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 04:39:45 2011] Assessing source extent using major
[Thu Nov 24 04:39:45 2011] Source does appear to be extended
[Thu Nov 24 04:39:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 07:11:37 2011] Using EEF radius (= 9.32 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 07:11:37 2011] Initial guess for spatial extent in simple fitting = 9.32"
[Thu Nov 24 07:11:37 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.074
[Thu Nov 24 07:11:37 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 9.32"
[Thu Nov 24 07:40:01 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src7.ximg exists
[Thu Nov 24 07:40:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src7.csv
[Thu Nov 24 07:40:01 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Nov 24 07:40:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src7.csv
[Thu Nov 24 07:40:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 07:40:01 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Nov 24 07:40:01 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Nov 24 07:40:01 2011] Fit fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Nov 24 07:40:14 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 19.027928 pixels away
[Thu Nov 24 07:40:14 2011] Source 14 is offset by -8.307794 and -4.166818 pixels which is larger than
2 X fitted extent = 7.883127 x 7.883127, not incorporating fit results
[Thu Nov 24 07:40:14 2011] Spatial fit model total counts = 1002.130000, observed total counts = 1002.000000
[Thu Nov 24 07:40:14 2011] Offset between fit and detection position for source 14 = 2.776998 pixels
[Thu Nov 24 07:40:14 2011] Warning, changing simple spatial fit ID from 7 to 14
[Thu Nov 24 07:40:14 2011] 982.114000 total counts/ 851.020000 bgd. counts: snr = 4.493792
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 2.776998 pixels
  Position = (227.6, 331.5) = 22 17 0.86 -17 25 47.6
  Extent = 18.4 (18.4-36.9)", rotation angle = 0
  Source counts = 131.1 +/- 31.3
  Background counts = 851.0
  Rate = 0.004 +/- 0.0009
[Thu Nov 24 07:40:14 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 07:40:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 07:40:14 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 07:40:14 2011] Source does appear to be extended
[Thu Nov 24 07:40:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 07:40:14 2011] Source is confused with source 16
[Thu Nov 24 09:43:44 2011] XMMSAS src. selection expression = ellipse(19756.678000, 28790.090000, 1106.388032, 1106.388032, 0.000000, X, Y)
[Thu Nov 24 09:43:44 2011] Writing source region out to fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src14_src.reg
[Thu Nov 24 09:43:44 2011] Extracting stamp from image fullrun_mos2_xmm0505460301_pi300-10000_cl_sm2.00.img.gz, (164, 268) - (291, 395)
[Thu Nov 24 09:43:44 2011] XMMSAS bgd. selection expression = annulus(19756.678000, 28790.090000, 1843.980053, 3687.960106, X, Y) && !ellipse(20788.117610, 29238.611820, 1044.368030, 1044.368030, 0.000000, X, Y) && !ellipse(21998.542000, 29267.526000, 1319.920038, 1319.920038, 0.000000, X, Y) && !ellipse(21190.556000, 30473.432000, 1482.304043, 1482.304043, 0.000000, X, Y) && !ellipse(21066.354000, 27032.414000, 1344.176039, 1344.176039, 0.000000, X, Y) && !ellipse(19539.171127, 27970.013550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22186.149048, 30716.240448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22596.050000, 29209.836000, 1080.344031, 1080.344031, 0.000000, X, Y) && !ellipse(23258.823364, 29810.729431, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 09:43:44 2011] Writing fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src14.gif
[Thu Nov 24 09:48:02 2011] Mean detx,y = (7645.95, -1084.13) 
[Thu Nov 24 09:48:03 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 09:48:17 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 09:48:17 2011] Setting source spectrum file to fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Nov 24 09:48:17 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu Nov 24 10:28:06 2011] Updating aperture counts using extracted products
[Thu Nov 24 10:28:06 2011] Error reading totcts from fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Nov 24 10:28:06 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 10:28:06 2011] Using photon index=1.80, rate=0.00394, arf fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src14.arf
[Thu Nov 24 10:28:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 10:28:06 2011] Updating source flux to 5.8e-14
[Thu Nov 24 10:29:46 2011] Flag b found in src. 14 procflags, skipping spectral fitting
[Thu Nov 24 10:29:46 2011] Flag c found in src. 14 procflags, skipping spectral fitting