[Thu Nov 24 01:39:25 2011] Detection parameters:
  Position = (261.4, 332.4) = 22 16 50.60 -17 25 44.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.7 +/- 17.2
  Background counts = 80.9
  Rate = 0.002 +/- 0.0005

[Thu Nov 24 01:39:25 2011] Off-axis axis estimate = 3.64'
[Thu Nov 24 04:07:40 2011] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 04:07:40 2011] Initial guess for spatial extent in simple fitting = 8.25"
[Thu Nov 24 04:07:40 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.088
[Thu Nov 24 04:07:40 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 8.25"
[Thu Nov 24 04:39:27 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src18.ximg exists
[Thu Nov 24 04:39:27 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src18.csv
[Thu Nov 24 04:39:27 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Nov 24 04:39:27 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src18.csv
[Thu Nov 24 04:39:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 04:39:28 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Nov 24 04:39:28 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Nov 24 04:39:28 2011] Fit fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Thu Nov 24 04:39:45 2011] Warning, spatial fit 18 centroid is now closest to src. 3
[Thu Nov 24 04:39:45 2011] Spatial fit model total counts = 789.033000, observed total counts = 787.000000
[Thu Nov 24 04:39:45 2011] Offset between fit and detection position for source 13 = 4.081427 pixels
[Thu Nov 24 04:39:45 2011] Warning, changing simple spatial fit ID from 18 to 20
[Thu Nov 24 04:39:45 2011] 765.314800 total counts/ 702.761000 bgd. counts: snr = 2.359662
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 4.081427 pixels
  Position = (260.3, 336.3) = 22 16 50.94 -17 25 26.8
  Extent = 11.2 (4.7-16.8)", rotation angle = 0
  Source counts = 62.6 +/- 27.7
  Background counts = 702.8
  Rate = 0.002 +/- 0.0008
[Thu Nov 24 04:39:45 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 04:39:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 04:39:45 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 04:39:45 2011] Source does appear to be extended
[Thu Nov 24 04:39:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 04:39:45 2011] Source is confused with source 3
[Thu Nov 24 07:11:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 07:11:37 2011] Initial guess for spatial extent in simple fitting = 11.23"
[Thu Nov 24 07:11:37 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.947
[Thu Nov 24 07:11:37 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 11.23"
[Thu Nov 24 07:40:01 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src18.ximg exists
[Thu Nov 24 07:40:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src18.csv
[Thu Nov 24 07:40:01 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu Nov 24 07:40:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src18.csv
[Thu Nov 24 07:40:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 07:40:01 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu Nov 24 07:40:01 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Nov 24 07:40:01 2011] Fit fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Thu Nov 24 07:40:14 2011] Source 13 is offset by -4.750851 and 0.595669 pixels which is larger than
2 X fitted extent = 4.744874 x 4.744874, not incorporating fit results
[Thu Nov 24 07:40:14 2011] Spatial fit model total counts = 785.340000, observed total counts = 787.000000
[Thu Nov 24 07:40:14 2011] Offset between fit and detection position for source 13 = 0.020529 pixels
[Thu Nov 24 07:40:14 2011] Warning, changing simple spatial fit ID from 18 to 20
[Thu Nov 24 07:40:14 2011] 736.660900 total counts/ 641.545000 bgd. counts: snr = 3.755256
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.020529 pixels
  Position = (260.3, 336.3) = 22 16 50.94 -17 25 26.7
  Extent = 13.5 (6.9-16.8)", rotation angle = 0
  Source counts = 95.1 +/- 27.1
  Background counts = 641.5
  Rate = 0.003 +/- 0.0008
[Thu Nov 24 07:40:14 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 07:40:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 07:40:14 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 07:40:14 2011] Source does appear to be extended
[Thu Nov 24 07:40:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 09:43:45 2011] XMMSAS src. selection expression = ellipse(22596.050000, 29209.836000, 810.258023, 810.258023, 0.000000, X, Y)
[Thu Nov 24 09:43:45 2011] Writing source region out to fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src13_src.reg
[Thu Nov 24 09:43:45 2011] Extracting stamp from image fullrun_mos2_xmm0505460301_pi300-10000_cl_sm2.00.img.gz, (214, 290) - (307, 383)
[Thu Nov 24 09:43:45 2011] XMMSAS bgd. selection expression = annulus(22596.050000, 29209.836000, 1350.430039, 2700.860078, X, Y) && !ellipse(20788.117610, 29238.611820, 1044.368030, 1044.368030, 0.000000, X, Y) && !ellipse(21998.542000, 29267.526000, 1319.920038, 1319.920038, 0.000000, X, Y) && !ellipse(21190.556000, 30473.432000, 1482.304043, 1482.304043, 0.000000, X, Y) && !ellipse(19756.678000, 28790.090000, 1475.184042, 1475.184042, 0.000000, X, Y) && !ellipse(21066.354000, 27032.414000, 1344.176039, 1344.176039, 0.000000, X, Y) && !ellipse(19539.171127, 27970.013550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22186.149048, 30716.240448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23258.823364, 29810.729431, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 09:43:45 2011] Writing fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src13.gif
[Thu Nov 24 09:50:51 2011] Mean detx,y = (5748.81, 37.26) 
[Thu Nov 24 09:50:52 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 09:50:59 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 09:50:59 2011] Setting source spectrum file to fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Nov 24 09:50:59 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Nov 24 10:26:36 2011] Not generating rmf since there are only 95 counts
[Thu Nov 24 10:26:36 2011] rmf not generated due to insufficient counts
[Thu Nov 24 10:28:06 2011] Updating aperture counts using extracted products
[Thu Nov 24 10:28:06 2011] Error reading totcts from fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Nov 24 10:28:06 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 10:28:06 2011] Using photon index=1.80, rate=0.00286, arf fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src13.arf
[Thu Nov 24 10:28:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 10:28:06 2011] Updating source flux to 3.8e-14
[Thu Nov 24 10:29:46 2011] Flag b found in src. 13 procflags, skipping spectral fitting
[Thu Nov 24 10:29:46 2011] Flag c found in src. 13 procflags, skipping spectral fitting
[Thu Nov 24 10:29:46 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting