[Thu Nov 24 01:39:25 2011] Detection parameters:
  Position = (239.7, 336.1) = 22 16 57.19 -17 25 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3912.2 +/- 75.9
  Background counts = 79.3
  Rate = 0.1 +/- 0.003

[Thu Nov 24 01:39:25 2011] Off-axis axis estimate = 5.06'
[Thu Nov 24 04:07:40 2011] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 04:07:40 2011] Initial guess for spatial extent in simple fitting = 8.96"
[Thu Nov 24 04:07:40 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.954
[Thu Nov 24 04:07:40 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.96"
[Thu Nov 24 04:39:27 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Nov 24 04:39:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 04:39:27 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Nov 24 04:39:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 04:39:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 04:39:27 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Nov 24 04:39:27 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Nov 24 04:39:27 2011] Fit fullrun_mos2_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Nov 24 04:39:45 2011] Spatial fit model total counts = 7990.190000, observed total counts = 7990.000000
[Thu Nov 24 04:39:45 2011] Offset between fit and detection position for source 1 = 0.608441 pixels
[Thu Nov 24 04:39:45 2011] 7982.360000 total counts/ 2934.290000 bgd. counts: snr = 93.190974
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.608441 pixels
  Position = (239.5, 336.6) = 22 16 57.25 -17 25 25.2
  Extent = 13.1 (12.7-13.4)", rotation angle = 0
  Source counts = 5048.1 +/- 89.3
  Background counts = 2934.3
  Rate = 0.2 +/- 0.003
[Thu Nov 24 04:39:45 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 04:39:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 04:39:45 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 04:39:45 2011] Source does appear to be extended
[Thu Nov 24 04:39:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 07:11:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 07:11:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 07:11:37 2011] Initial guess for spatial extent in simple fitting = 13.05"
[Thu Nov 24 07:11:37 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.999
[Thu Nov 24 07:11:37 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 13.05"
[Thu Nov 24 07:40:00 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Nov 24 07:40:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src1.csv
[Thu Nov 24 07:40:00 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Nov 24 07:40:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src1.csv
[Thu Nov 24 07:40:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 07:40:01 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Nov 24 07:40:01 2011] fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Nov 24 07:40:01 2011] Fit fullrun_mos2_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Nov 24 07:40:14 2011] Warning, spatial fit 1 centroid is now closest to src. 14
[Thu Nov 24 07:40:14 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 07:40:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 07:40:14 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 07:40:14 2011] Source does appear to be extended
[Thu Nov 24 07:40:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 09:43:44 2011] Counts = 5048.070000, rescaling region sizes by 2.000000
[Thu Nov 24 09:43:44 2011] XMMSAS src. selection expression = ellipse(20788.117610, 29238.611820, 1566.552045, 1566.552045, 0.000000, X, Y)
[Thu Nov 24 09:43:44 2011] Writing source region out to fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src1_src.reg
[Thu Nov 24 09:43:44 2011] Extracting stamp from image fullrun_mos2_xmm0505460301_pi300-10000_cl_sm2.00.img.gz, (149, 247) - (330, 427)
[Thu Nov 24 09:43:44 2011] XMMSAS bgd. selection expression = annulus(20788.117610, 29238.611820, 5221.840150, 10443.680301, X, Y) && !ellipse(21998.542000, 29267.526000, 1319.920038, 1319.920038, 0.000000, X, Y) && !ellipse(25301.074000, 20326.170000, 327.841609, 327.841609, 0.000000, X, Y) && !ellipse(21190.556000, 30473.432000, 1482.304043, 1482.304043, 0.000000, X, Y) && !ellipse(19756.678000, 28790.090000, 1475.184042, 1475.184042, 0.000000, X, Y) && !ellipse(18335.615200, 34498.564400, 373.831211, 373.831211, 0.000000, X, Y) && !ellipse(25785.827900, 27344.185600, 312.341609, 312.341609, 0.000000, X, Y) && !ellipse(22769.395400, 36403.478400, 396.432011, 396.432011, 0.000000, X, Y) && !ellipse(21066.354000, 27032.414000, 1344.176039, 1344.176039, 0.000000, X, Y) && !ellipse(19539.171127, 27970.013550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27005.455980, 19235.516600, 396.520811, 396.520811, 0.000000, X, Y) && !ellipse(22186.149048, 30716.240448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22596.050000, 29209.836000, 1080.344031, 1080.344031, 0.000000, X, Y) && !ellipse(25948.774261, 20964.279343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23258.823364, 29810.729431, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 09:43:44 2011] Writing fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src1.gif
[Thu Nov 24 09:43:50 2011] Mean detx,y = (7165.95, -584.09) 
[Thu Nov 24 09:43:51 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 09:46:32 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 09:46:32 2011] Setting source spectrum file to fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Nov 24 09:46:32 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Nov 24 10:28:06 2011] Updating aperture counts using extracted products
[Thu Nov 24 10:28:06 2011] Error reading totcts from fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Nov 24 10:28:06 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 10:28:06 2011] Using photon index=1.80, rate=0.152, arf fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src1.arf
[Thu Nov 24 10:28:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 10:28:06 2011] Updating source flux to 2.1e-12
[Thu Nov 24 10:31:08 2011] Reading fit data from xmm0505460301/analysis//spectral/fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src1_pl.csv
[Thu Nov 24 10:31:08 2011] Spectral fit parameter nH value = 1.51702e+21
[Thu Nov 24 10:31:08 2011] Spectral fit parameter PhoIndex value = 2.40984
[Thu Nov 24 10:31:08 2011] Failed to get F(0.3-8.0) from xmm0505460301/analysis//spectral/fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Nov 24 10:31:08 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 10:31:08 2011] Using Nh = 1.5e+21, photon index=2.41, rate=0.152, arf fullrun_mos2_xmm0505460301_pi300-10000_pass1_cl_src1.arf
[Thu Nov 24 10:31:08 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 10:31:08 2011] Updating source flux to 1.8e-12