[Thu Nov 24 01:39:10 2011] Detection parameters:
  Position = (224.2, 340.8) = 22 17 1.91 -17 25 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.6 +/- 19.9
  Background counts = 87.7
  Rate = 0.005 +/- 0.0008

[Thu Nov 24 01:39:11 2011] Off-axis axis estimate = 6.20'
[Thu Nov 24 02:57:25 2011] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 02:57:25 2011] Initial guess for spatial extent in simple fitting = 9.53"
[Thu Nov 24 02:57:25 2011] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.243
[Thu Nov 24 02:57:25 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 9.53"
[Thu Nov 24 04:07:39 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src7.ximg exists
[Thu Nov 24 04:07:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src7.csv
[Thu Nov 24 04:07:39 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Nov 24 04:07:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src7.csv
[Thu Nov 24 04:07:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 04:07:39 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Nov 24 04:07:39 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Nov 24 04:07:39 2011] Fit fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Nov 24 04:39:41 2011] Source 9 is offset by -8.596115 and 5.028448 pixels which is larger than
2 X fitted extent = 7.628966 x 7.628966, not incorporating fit results
[Thu Nov 24 04:39:41 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 04:39:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 04:39:41 2011] Assessing source extent using major
[Thu Nov 24 04:39:41 2011] Source does appear to be extended
[Thu Nov 24 04:39:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 05:51:17 2011] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 05:51:17 2011] Initial guess for spatial extent in simple fitting = 9.53"
[Thu Nov 24 05:51:17 2011] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.243
[Thu Nov 24 05:51:17 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 9.53"
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src7.ximg exists
[Thu Nov 24 07:11:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src7.csv
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Nov 24 07:11:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src7.csv
[Thu Nov 24 07:11:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Nov 24 07:11:37 2011] Fit fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Nov 24 07:40:11 2011] Spatial fit model total counts = 1180.660000, observed total counts = 1180.000000
[Thu Nov 24 07:40:11 2011] Offset between fit and detection position for source 9 = 7.826126 pixels
[Thu Nov 24 07:40:11 2011] 1169.310000 total counts/ 738.261000 bgd. counts: snr = 15.864328
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 7.826126 pixels
  Position = (217.6, 345.1) = 22 17 3.91 -17 24 48.3
  Extent = 19.1 (19.0-38.1)", rotation angle = 0
  Source counts = 431.0 +/- 34.2
  Background counts = 738.3
  Rate = 0.01 +/- 0.001
[Thu Nov 24 07:40:11 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 07:40:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 07:40:11 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 07:40:11 2011] Source does appear to be extended
[Thu Nov 24 07:40:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 07:40:11 2011] Source is confused with source 12
[Thu Nov 24 08:56:19 2011] XMMSAS src. selection expression = ellipse(18882.282000, 29974.734000, 1143.462033, 1143.462033, 0.000000, X, Y)
[Thu Nov 24 08:56:19 2011] Writing source region out to fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src9_src.reg
[Thu Nov 24 08:56:19 2011] Extracting stamp from image fullrun_mos1_xmm0505460301_pi300-10000_cl_sm2.00.img.gz, (152, 279) - (283, 411)
[Thu Nov 24 08:56:19 2011] XMMSAS bgd. selection expression = annulus(18882.282000, 29974.734000, 1905.770055, 3811.540110, X, Y) && !ellipse(20818.626800, 29186.570600, 1054.152030, 1054.152030, 0.000000, X, Y) && !ellipse(21174.024002, 29879.338043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21978.361200, 29166.928000, 999.928029, 999.928029, 0.000000, X, Y) && !ellipse(18332.032852, 34478.995758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22042.324783, 27983.543579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22706.386000, 30584.348000, 1384.664040, 1384.664040, 0.000000, X, Y) && !ellipse(22367.418000, 29753.118000, 1248.008036, 1248.008036, 0.000000, X, Y) && !ellipse(20013.598000, 28810.360000, 2964.440085, 2964.440085, 0.000000, X, Y) && !ellipse(21350.994000, 27549.786000, 1341.656039, 1341.656039, 0.000000, X, Y) && !ellipse(18763.606000, 27671.386000, 1488.928043, 1488.928043, 0.000000, X, Y) && !ellipse(20508.480000, 28357.830000, 934.472027, 934.472027, 0.000000, X, Y) && !ellipse(23494.940430, 30367.037720, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22317.182709, 28402.504547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22715.535339, 28404.609985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17522.621948, 34444.865356, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 08:56:19 2011] Writing fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src9.gif
[Thu Nov 24 08:59:14 2011] Mean detx,y = (-494.57, -9126.67) 
[Thu Nov 24 08:59:15 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 08:59:43 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 08:59:43 2011] Setting source spectrum file to fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Nov 24 08:59:43 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Nov 24 10:28:04 2011] Updating aperture counts using extracted products
[Thu Nov 24 10:28:04 2011] Error reading totcts from fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Nov 24 10:28:05 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 10:28:05 2011] Using photon index=1.80, rate=0.013, arf fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src9.arf
[Thu Nov 24 10:28:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 10:28:05 2011] Updating source flux to 2.1e-13
[Thu Nov 24 10:28:08 2011] Flag b found in src. 9 procflags, skipping spectral fitting
[Thu Nov 24 10:28:08 2011] Flag c found in src. 9 procflags, skipping spectral fitting