[Thu Nov 24 01:39:10 2011] Detection parameters:
  Position = (243.9, 344.0) = 22 16 55.90 -17 24 56.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 512.3 +/- 30.7
  Background counts = 74.5
  Rate = 0.02 +/- 0.001

[Thu Nov 24 01:39:11 2011] Off-axis axis estimate = 5.15'
[Thu Nov 24 02:57:25 2011] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 02:57:25 2011] Initial guess for spatial extent in simple fitting = 9.00"
[Thu Nov 24 02:57:25 2011] source mask rpix=2.1, npix_max = 26, mask sum = 28, frac = 1.060
[Thu Nov 24 02:57:25 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 9.00"
[Thu Nov 24 04:07:39 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src2.ximg exists
[Thu Nov 24 04:07:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src2.csv
[Thu Nov 24 04:07:39 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Nov 24 04:07:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src2.csv
[Thu Nov 24 04:07:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 04:07:39 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Nov 24 04:07:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Nov 24 04:07:39 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Nov 24 04:07:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Nov 24 04:07:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 04:39:41 2011] Warning, spatial fit 2 centroid is now closest to src. 8
[Thu Nov 24 04:39:41 2011] Source 3 is offset by 1.689517 and 7.050483 pixels which is larger than
2 X fitted extent = 3.893527 x 3.893527, not incorporating fit results
[Thu Nov 24 04:39:41 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 04:39:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 04:39:41 2011] Assessing source extent using major
[Thu Nov 24 04:39:41 2011] Source does appear to be extended
[Thu Nov 24 04:39:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 04:39:41 2011] Source is confused with source 1
[Thu Nov 24 05:51:17 2011] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 05:51:17 2011] Initial guess for spatial extent in simple fitting = 9.00"
[Thu Nov 24 05:51:17 2011] source mask rpix=2.1, npix_max = 26, mask sum = 28, frac = 1.060
[Thu Nov 24 05:51:17 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 9.00"
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src2.ximg exists
[Thu Nov 24 07:11:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src2.csv
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Nov 24 07:11:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src2.csv
[Thu Nov 24 07:11:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Nov 24 07:11:37 2011] Fit fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Nov 24 07:40:11 2011] Source 3 is offset by -7.679632 and -4.618551 pixels which is larger than
2 X fitted extent = 1.514584 x 1.514584, not incorporating fit results
[Thu Nov 24 07:40:11 2011] Source 3 is offset by 3.444299 and 7.277311 pixels which is larger than
2 X fitted extent = 6.102621 x 6.102621, not incorporating fit results
[Thu Nov 24 07:40:11 2011] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.663159 pixels away
[Thu Nov 24 07:40:11 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 07:40:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 07:40:11 2011] Assessing source extent using major
[Thu Nov 24 07:40:11 2011] Source does appear to be extended
[Thu Nov 24 07:40:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 08:56:19 2011] XMMSAS src. selection expression = ellipse(21174.024002, 29879.338043, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Nov 24 08:56:19 2011] Writing source region out to fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src3_src.reg
[Thu Nov 24 08:56:19 2011] Extracting stamp from image fullrun_mos1_xmm0505460301_pi300-10000_cl_sm2.00.img.gz, (206, 306) - (281, 381)
[Thu Nov 24 08:56:19 2011] XMMSAS bgd. selection expression = annulus(21174.024002, 29879.338043, 1087.500000, 2175.000000, X, Y) && !ellipse(20818.626800, 29186.570600, 1054.152030, 1054.152030, 0.000000, X, Y) && !ellipse(21978.361200, 29166.928000, 999.928029, 999.928029, 0.000000, X, Y) && !ellipse(22042.324783, 27983.543579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18882.282000, 29974.734000, 1524.616044, 1524.616044, 0.000000, X, Y) && !ellipse(22706.386000, 30584.348000, 1384.664040, 1384.664040, 0.000000, X, Y) && !ellipse(22367.418000, 29753.118000, 1248.008036, 1248.008036, 0.000000, X, Y) && !ellipse(20013.598000, 28810.360000, 2964.440085, 2964.440085, 0.000000, X, Y) && !ellipse(21350.994000, 27549.786000, 1341.656039, 1341.656039, 0.000000, X, Y) && !ellipse(18763.606000, 27671.386000, 1488.928043, 1488.928043, 0.000000, X, Y) && !ellipse(20508.480000, 28357.830000, 934.472027, 934.472027, 0.000000, X, Y) && !ellipse(23494.940430, 30367.037720, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22317.182709, 28402.504547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22715.535339, 28404.609985, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 08:56:19 2011] Writing fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src3.gif
[Thu Nov 24 08:58:08 2011] Mean detx,y = (113.27, -7329.56) 
[Thu Nov 24 08:58:09 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 08:58:22 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 08:58:22 2011] Setting source spectrum file to fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Nov 24 08:58:22 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Nov 24 09:09:46 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Nov 24 09:09:46 2011] rmf not generated due to insufficient counts
[Thu Nov 24 10:28:04 2011] Updating aperture counts using extracted products
[Thu Nov 24 10:28:04 2011] Error reading totcts from fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Nov 24 10:28:05 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 10:28:05 2011] Using photon index=1.80, rate=0.0225, arf fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src3.arf
[Thu Nov 24 10:28:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 10:28:05 2011] Updating source flux to 4.3e-13
[Thu Nov 24 10:28:08 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting