[Thu Nov 24 01:39:11 2011] Detection parameters:
  Position = (249.4, 321.1) = 22 16 54.24 -17 26 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.8 +/- 18.8
  Background counts = 82.3
  Rate = 0.004 +/- 0.0007

[Thu Nov 24 01:39:11 2011] Off-axis axis estimate = 3.92'
[Thu Nov 24 02:57:25 2011] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 02:57:25 2011] Initial guess for spatial extent in simple fitting = 8.39"
[Thu Nov 24 02:57:25 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.060
[Thu Nov 24 02:57:25 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 8.39"
[Thu Nov 24 04:07:39 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src14.ximg exists
[Thu Nov 24 04:07:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src14.csv
[Thu Nov 24 04:07:39 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Nov 24 04:07:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src14.csv
[Thu Nov 24 04:07:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 04:07:40 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Nov 24 04:07:40 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Nov 24 04:07:40 2011] Fit fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Thu Nov 24 04:39:41 2011] Spatial fit model total counts = 1060.090000, observed total counts = 1059.000000
[Thu Nov 24 04:39:41 2011] Offset between fit and detection position for source 19 = 5.194695 pixels
[Thu Nov 24 04:39:41 2011] 1078.912000 total counts/ 732.333000 bgd. counts: snr = 12.807016
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 5.194695 pixels
  Position = (246.0, 317.2) = 22 16 55.29 -17 26 49.6
  Extent = 16.8 (16.8-16.8)", rotation angle = 0
  Source counts = 346.6 +/- 32.8
  Background counts = 732.3
  Rate = 0.01 +/- 0.001
[Thu Nov 24 04:39:41 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 04:39:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 04:39:41 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 04:39:41 2011] Source does appear to be extended
[Thu Nov 24 04:39:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 04:39:41 2011] Source is confused with source 17
[Thu Nov 24 05:51:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 05:51:17 2011] Initial guess for spatial extent in simple fitting = 16.77"
[Thu Nov 24 05:51:17 2011] source mask rpix=3.9, npix_max = 75, mask sum = 65, frac = 0.857
[Thu Nov 24 05:51:17 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 16.77"
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src14.ximg exists
[Thu Nov 24 07:11:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src14.csv
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Nov 24 07:11:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src14.csv
[Thu Nov 24 07:11:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Nov 24 07:11:37 2011] Fit fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Nov 24 07:40:11 2011] Warning, spatial fit 14 centroid is now closest to src. 20
[Thu Nov 24 07:40:11 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 07:40:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 07:40:11 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 07:40:11 2011] Source does appear to be extended
[Thu Nov 24 07:40:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 08:56:19 2011] XMMSAS src. selection expression = ellipse(21350.994000, 27549.786000, 1006.242029, 1006.242029, 0.000000, X, Y)
[Thu Nov 24 08:56:19 2011] Writing source region out to fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src19_src.reg
[Thu Nov 24 08:56:19 2011] Extracting stamp from image fullrun_mos1_xmm0505460301_pi300-10000_cl_sm2.00.img.gz, (188, 259) - (304, 375)
[Thu Nov 24 08:56:19 2011] XMMSAS bgd. selection expression = annulus(21350.994000, 27549.786000, 1677.070048, 3354.140097, X, Y) && !ellipse(20818.626800, 29186.570600, 1054.152030, 1054.152030, 0.000000, X, Y) && !ellipse(21174.024002, 29879.338043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21978.361200, 29166.928000, 999.928029, 999.928029, 0.000000, X, Y) && !ellipse(22042.324783, 27983.543579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18882.282000, 29974.734000, 1524.616044, 1524.616044, 0.000000, X, Y) && !ellipse(22706.386000, 30584.348000, 1384.664040, 1384.664040, 0.000000, X, Y) && !ellipse(22367.418000, 29753.118000, 1248.008036, 1248.008036, 0.000000, X, Y) && !ellipse(20013.598000, 28810.360000, 2964.440085, 2964.440085, 0.000000, X, Y) && !ellipse(18763.606000, 27671.386000, 1488.928043, 1488.928043, 0.000000, X, Y) && !ellipse(20508.480000, 28357.830000, 934.472027, 934.472027, 0.000000, X, Y) && !ellipse(23494.940430, 30367.037720, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22317.182709, 28402.504547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22715.535339, 28404.609985, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 08:56:19 2011] Writing fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src19.gif
[Thu Nov 24 09:02:53 2011] Mean detx,y = (-1488.44, -6253.74) 
[Thu Nov 24 09:02:54 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 09:03:18 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 09:03:18 2011] Setting source spectrum file to fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Nov 24 09:03:18 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Nov 24 10:28:05 2011] Updating aperture counts using extracted products
[Thu Nov 24 10:28:05 2011] Error reading totcts from fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Nov 24 10:28:06 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 10:28:06 2011] Using photon index=1.80, rate=0.0104, arf fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src19.arf
[Thu Nov 24 10:28:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 10:28:06 2011] Updating source flux to 1.5e-13
[Thu Nov 24 10:28:08 2011] Flag c found in src. 19 procflags, skipping spectral fitting