[Thu Nov 24 01:39:10 2011] Detection parameters:
  Position = (239.8, 336.0) = 22 16 57.15 -17 25 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3722.7 +/- 74.6
  Background counts = 90.6
  Rate = 0.1 +/- 0.003

[Thu Nov 24 01:39:11 2011] Off-axis axis estimate = 5.05'
[Thu Nov 24 02:57:25 2011] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 02:57:25 2011] Initial guess for spatial extent in simple fitting = 8.95"
[Thu Nov 24 02:57:25 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.146
[Thu Nov 24 02:57:25 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.95"
[Thu Nov 24 04:07:39 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Nov 24 04:07:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 04:07:39 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Nov 24 04:07:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 04:07:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 04:07:39 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Nov 24 04:07:39 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Nov 24 04:07:39 2011] Fit fullrun_mos1_xmm0505460301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Nov 24 04:39:41 2011] Spatial fit model total counts = 7461.360000, observed total counts = 7466.000000
[Thu Nov 24 04:39:41 2011] Offset between fit and detection position for source 1 = 0.030215 pixels
[Thu Nov 24 04:39:41 2011] 7418.040000 total counts/ 2170.180000 bgd. counts: snr = 112.650821
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.030215 pixels
  Position = (239.9, 336.0) = 22 16 57.15 -17 25 27.8
  Extent = 13.2 (12.8-13.6)", rotation angle = 0
  Source counts = 5247.9 +/- 86.1
  Background counts = 2170.2
  Rate = 0.2 +/- 0.003
[Thu Nov 24 04:39:41 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 04:39:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 04:39:41 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 04:39:41 2011] Source does appear to be extended
[Thu Nov 24 04:39:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 04:39:41 2011] Source is confused with source 3
[Thu Nov 24 04:39:41 2011] Source is confused with source 20
[Thu Nov 24 05:51:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 05:51:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 05:51:17 2011] Initial guess for spatial extent in simple fitting = 13.18"
[Thu Nov 24 05:51:17 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.984
[Thu Nov 24 05:51:17 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 13.18"
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Nov 24 07:11:37 2011] Fit fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Nov 24 07:11:37 2011] fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Nov 24 07:11:37 2011] Fit fullrun_mos1_xmm0505460301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Nov 24 07:40:11 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Thu Nov 24 07:40:11 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 07:40:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 07:40:11 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 07:40:11 2011] Source does appear to be extended
[Thu Nov 24 07:40:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 08:56:19 2011] Counts = 5247.860000, rescaling region sizes by 2.000000
[Thu Nov 24 08:56:19 2011] XMMSAS src. selection expression = ellipse(20818.626800, 29186.570600, 1581.228045, 1581.228045, 0.000000, X, Y)
[Thu Nov 24 08:56:19 2011] Writing source region out to fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src1_src.reg
[Thu Nov 24 08:56:19 2011] Extracting stamp from image fullrun_mos1_xmm0505460301_pi300-10000_cl_sm2.00.img.gz, (149, 245) - (331, 427)
[Thu Nov 24 08:56:19 2011] XMMSAS bgd. selection expression = annulus(20818.626800, 29186.570600, 5270.760152, 10541.520303, X, Y) && !ellipse(21174.024002, 29879.338043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21978.361200, 29166.928000, 999.928029, 999.928029, 0.000000, X, Y) && !ellipse(18332.032852, 34478.995758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22042.324783, 27983.543579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18882.282000, 29974.734000, 1524.616044, 1524.616044, 0.000000, X, Y) && !ellipse(22706.386000, 30584.348000, 1384.664040, 1384.664040, 0.000000, X, Y) && !ellipse(22367.418000, 29753.118000, 1248.008036, 1248.008036, 0.000000, X, Y) && !ellipse(22733.101240, 36355.523200, 411.816012, 411.816012, 0.000000, X, Y) && !ellipse(25810.903900, 27332.485260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20013.598000, 28810.360000, 2964.440085, 2964.440085, 0.000000, X, Y) && !ellipse(21350.994000, 27549.786000, 1341.656039, 1341.656039, 0.000000, X, Y) && !ellipse(18763.606000, 27671.386000, 1488.928043, 1488.928043, 0.000000, X, Y) && !ellipse(20508.480000, 28357.830000, 934.472027, 934.472027, 0.000000, X, Y) && !ellipse(23494.940430, 30367.037720, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22317.182709, 28402.504547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22715.535339, 28404.609985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17522.621948, 34444.865356, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 08:56:19 2011] Writing fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src1.gif
[Thu Nov 24 08:56:24 2011] Mean detx,y = (-387.25, -7335.50) 
[Thu Nov 24 08:56:26 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 08:58:06 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 08:58:06 2011] Setting source spectrum file to fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Nov 24 08:58:06 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Nov 24 10:28:04 2011] Updating aperture counts using extracted products
[Thu Nov 24 10:28:04 2011] Error reading totcts from fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Nov 24 10:28:05 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 10:28:05 2011] Using photon index=1.80, rate=0.158, arf fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src1.arf
[Thu Nov 24 10:28:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 10:28:05 2011] Updating source flux to 2.2e-12
[Thu Nov 24 10:28:08 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Nov 24 10:29:46 2011] Reading fit data from xmm0505460301/analysis//spectral/fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src1_pl.csv
[Thu Nov 24 10:29:46 2011] Spectral fit parameter nH value = 1.40319e+21
[Thu Nov 24 10:29:46 2011] Spectral fit parameter PhoIndex value = 2.36604
[Thu Nov 24 10:29:46 2011] Failed to get F(0.3-8.0) from xmm0505460301/analysis//spectral/fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Nov 24 10:29:46 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 10:29:46 2011] Using Nh = 1.4e+21, photon index=2.37, rate=0.158, arf fullrun_mos1_xmm0505460301_pi300-10000_pass1_cl_src1.arf
[Thu Nov 24 10:29:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 10:29:46 2011] Updating source flux to 1.9e-12