[Fri May  4 04:10:44 2012] Detection parameters:
  Position = (286.1, 195.2) = 22 13 55.61 -17 59 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.0 +/- 13.5
  Background counts = 43.4
  Rate = 0.005 +/- 0.0009

[Fri May  4 04:10:44 2012] Off-axis axis estimate = 7.54'
[Fri May  4 04:14:41 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Fri May  4 04:14:41 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Fri May  4 04:14:41 2012] source mask rpix=2.3, npix_max = 32, mask sum = 35, frac = 1.082
[Fri May  4 04:14:41 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 10.20"
[Fri May  4 06:21:43 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_src37.ximg exists
[Fri May  4 06:21:43 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_src37_1.ximg exists
[Fri May  4 06:21:43 2012] Fit fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_src37 appears to have run properly
[Fri May  4 06:21:43 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Fri May  4 06:21:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src37.csv
[Fri May  4 06:21:43 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Fri May  4 06:21:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src37.csv
[Fri May  4 06:21:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 08:16:42 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 18.958706 pixels away
[Fri May  4 08:16:42 2012] Vigneting correction estimate = 1.000000
[Fri May  4 08:16:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 08:16:42 2012] Assessing source extent using major
[Fri May  4 08:16:42 2012] Source does appear to be extended
[Fri May  4 08:16:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 08:17:12 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Fri May  4 08:17:12 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Fri May  4 08:17:12 2012] source mask rpix=2.3, npix_max = 32, mask sum = 35, frac = 1.082
[Fri May  4 08:17:12 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 10.20"
[Fri May  4 10:24:46 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_src37.ximg exists
[Fri May  4 10:24:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_src37.csv
[Fri May  4 10:24:46 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri May  4 10:24:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_src37.csv
[Fri May  4 10:24:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 10:24:47 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri May  4 10:24:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src37.csv
[Fri May  4 10:24:47 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri May  4 10:24:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src37.csv
[Fri May  4 10:24:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 12:25:12 2012] Spatial fit model total counts = 393.389000, observed total counts = 315.000000
[Fri May  4 12:25:12 2012] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 12:25:12 2012] Vigneting correction estimate = 1.000000
[Fri May  4 12:25:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 12:25:12 2012] Assessing source extent using major
[Fri May  4 12:25:12 2012] Source does appear to be extended
[Fri May  4 12:25:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 12:25:53 2012] XMMSAS src. selection expression = ellipse(24845.588348, 16935.953400, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 12:25:53 2012] Writing source region out to fullrun_pn_xmm0505460201_pi300-10000_pass1_cl_src38_src.reg
[Fri May  4 12:25:53 2012] Extracting stamp from image fullrun_pn_xmm0505460201_pi300-10000_cl_sm2.00.img.gz, (249, 158) - (324, 233)
[Fri May  4 12:25:53 2012] XMMSAS bgd. selection expression = annulus(24845.588348, 16935.953400, 1087.500000, 2175.000000, X, Y) && !ellipse(26772.022200, 17624.468000, 409.422412, 409.422412, 0.000000, X, Y) && !ellipse(26760.984894, 18030.290100, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 12:25:53 2012] Writing fullrun_pn_xmm0505460201_pi300-10000_pass1_cl_src38.gif
[Fri May  4 13:15:37 2012] Mean detx,y = (-3506.07, -7243.48) 
[Fri May  4 13:15:43 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 13:16:33 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 13:16:34 2012] Setting source spectrum file to fullrun_pn_xmm0505460201_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri May  4 13:16:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505460201_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Fri May  4 14:03:15 2012] Not generating rmf since there are only 76 counts
[Fri May  4 14:03:15 2012] rmf not generated due to insufficient counts
[Fri May  4 15:00:46 2012] Updating aperture counts using extracted products
[Fri May  4 15:00:46 2012] Error reading totcts from fullrun_pn_xmm0505460201_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri May  4 15:00:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 15:00:49 2012] Using photon index=1.80, rate=0.00538, arf fullrun_pn_xmm0505460201_pi300-10000_pass1_cl_src38.arf
[Fri May  4 15:00:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 15:00:49 2012] Updating source flux to 2.3e-14
[Fri May  4 15:01:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting