[Fri May 4 04:10:42 2012] Detection parameters: Position = (334.8, 441.9) = 22 13 40.80 -17 41 14.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 100.0 +/- 13.8 Background counts = 40.2 Rate = 0.004 +/- 0.0005 [Fri May 4 04:10:44 2012] Off-axis axis estimate = 10.73' [Fri May 4 04:14:41 2012] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting [Fri May 4 04:14:41 2012] Initial guess for spatial extent in simple fitting = 11.79" [Fri May 4 04:14:41 2012] source mask rpix=2.7, npix_max = 41, mask sum = 31, frac = 0.752 [Fri May 4 04:14:41 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 11.79" [Fri May 4 06:21:43 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_src19.ximg exists [Fri May 4 06:21:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_src19.csv [Fri May 4 06:21:43 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_src19_1.ximg exists [Fri May 4 06:21:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_src19.csv [Fri May 4 06:21:43 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 4 06:21:43 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists [Fri May 4 06:21:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src19.csv [Fri May 4 06:21:43 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists [Fri May 4 06:21:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src19.csv [Fri May 4 06:21:43 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 4 08:16:42 2012] Source 20 is offset by -2.397211 and 9.189158 pixels which is larger than 2 X fitted extent = 6.519081 x 6.519081, not incorporating fit results [Fri May 4 08:16:42 2012] Vigneting correction estimate = 1.000000 [Fri May 4 08:16:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 4 08:16:42 2012] Assessing source extent using major [Fri May 4 08:16:42 2012] Source does appear to be extended [Fri May 4 08:16:42 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 4 08:17:12 2012] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting [Fri May 4 08:17:12 2012] Initial guess for spatial extent in simple fitting = 11.79" [Fri May 4 08:17:12 2012] source mask rpix=2.7, npix_max = 41, mask sum = 31, frac = 0.752 [Fri May 4 08:17:12 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 11.79" [Fri May 4 10:24:45 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_src19.ximg exists [Fri May 4 10:24:45 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_src19.csv [Fri May 4 10:24:45 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_src19_1.ximg exists [Fri May 4 10:24:45 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_src19.csv [Fri May 4 10:24:45 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 4 10:24:46 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Fri May 4 10:24:46 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src19.csv [Fri May 4 10:24:46 2012] fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Fri May 4 10:24:46 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src19.csv [Fri May 4 10:24:46 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 4 12:25:12 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 12.870136 pixels away [Fri May 4 12:25:12 2012] Vigneting correction estimate = 1.000000 [Fri May 4 12:25:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 4 12:25:12 2012] Assessing source extent using major [Fri May 4 12:25:12 2012] Source does appear to be extended [Fri May 4 12:25:12 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 4 12:25:52 2012] XMMSAS src. selection expression = ellipse(29076.892609, 38396.350769, 652.500000, 652.500000, 0.000000, X, Y) [Fri May 4 12:25:52 2012] Writing source region out to fullrun_pn_xmm0505460201_pi300-10000_pass1_cl_src20_src.reg [Fri May 4 12:25:52 2012] Extracting stamp from image fullrun_pn_xmm0505460201_pi300-10000_cl_sm2.00.img.gz, (297, 404) - (372, 479) [Fri May 4 12:25:52 2012] XMMSAS bgd. selection expression = annulus(29076.892609, 38396.350769, 1087.500000, 2175.000000, X, Y) && !ellipse(28402.730225, 38480.289520, 870.000000, 870.000000, 0.000000, X, Y) [Fri May 4 12:25:52 2012] Writing fullrun_pn_xmm0505460201_pi300-10000_pass1_cl_src20.gif [Fri May 4 12:51:52 2012] Mean detx,y = (778.90, 14115.07) [Fri May 4 12:51:58 2012] Setting backscal keywords in source and bgd. spectrum [Fri May 4 12:52:36 2012] Binned source spectrum to 10 counts/bin [Fri May 4 12:52:36 2012] Setting source spectrum file to fullrun_pn_xmm0505460201_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Fri May 4 12:52:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505460201_pi300-10000_pass1_cl_src20_bgd.pi.gz [Fri May 4 13:49:37 2012] Not generating rmf since there are only 99 counts [Fri May 4 13:49:37 2012] rmf not generated due to insufficient counts [Fri May 4 15:00:44 2012] Updating aperture counts using extracted products [Fri May 4 15:00:44 2012] Error reading totcts from fullrun_pn_xmm0505460201_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Fri May 4 15:00:47 2012] Calculating source flux in energy range 0.30-8.00 [Fri May 4 15:00:47 2012] Using photon index=1.80, rate=0.00359, arf fullrun_pn_xmm0505460201_pi300-10000_pass1_cl_src20.arf [Fri May 4 15:00:47 2012] Assuming count rate is from the 0.30-10.00 bandpass [Fri May 4 15:00:47 2012] Updating source flux to 2.6e-14 [Fri May 4 15:01:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting