[Fri May  4 04:10:45 2012] Detection parameters:
  Position = (183.8, 353.8) = 22 14 26.78 -17 47 38.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.8 +/- 12.0
  Background counts = 20.2
  Rate = 0.004 +/- 0.0007

[Fri May  4 04:10:47 2012] Off-axis axis estimate = 9.23'
[Fri May  4 06:21:44 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Fri May  4 06:21:44 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Fri May  4 06:21:44 2012] source mask rpix=2.5, npix_max = 36, mask sum = 31, frac = 0.839
[Fri May  4 06:21:44 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 11.04"
[Fri May  4 07:08:36 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_src8.ximg exists
[Fri May  4 07:08:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_src8.csv
[Fri May  4 07:08:36 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri May  4 07:08:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_src8.csv
[Fri May  4 07:08:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 07:08:36 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri May  4 07:08:36 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri May  4 07:08:36 2012] Fit fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri May  4 08:16:48 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.000887 pixels away
[Fri May  4 08:16:48 2012] Vigneting correction estimate = 1.000000
[Fri May  4 08:16:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 08:16:48 2012] Assessing source extent using major
[Fri May  4 08:16:48 2012] Source does appear to be extended
[Fri May  4 08:16:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 10:24:47 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Fri May  4 10:24:47 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Fri May  4 10:24:47 2012] source mask rpix=2.5, npix_max = 36, mask sum = 31, frac = 0.839
[Fri May  4 10:24:47 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 11.04"
[Fri May  4 11:07:42 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_src8.ximg exists
[Fri May  4 11:07:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_src8.csv
[Fri May  4 11:07:42 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri May  4 11:07:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_src8.csv
[Fri May  4 11:07:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 11:07:43 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri May  4 11:07:43 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri May  4 11:07:43 2012] Fit fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri May  4 12:25:17 2012] Spatial fit model total counts = 195.493000, observed total counts = 196.000000
[Fri May  4 12:25:17 2012] Offset between fit and detection position for source 4 = 0.357207 pixels
[Fri May  4 12:25:17 2012] 195.459800 total counts/ 149.398000 bgd. counts: snr = 3.768500
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.357207 pixels
  Position = (183.4, 353.7) = 22 14 26.89 -17 47 40.1
  Extent = 5.6 (4.0-7.5)", rotation angle = 0
  Source counts = 46.1 +/- 14.0
  Background counts = 149.4
  Rate = 0.002 +/- 0.0005
[Fri May  4 12:25:17 2012] Vigneting correction estimate = 1.000000
[Fri May  4 12:25:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 12:25:17 2012] Assessing source extent using major axis lower bound
[Fri May  4 12:25:17 2012] Source does appear to be extended
[Fri May  4 12:25:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 14:04:55 2012] XMMSAS src. selection expression = ellipse(15908.910600, 30721.612200, 334.533909, 334.533909, 0.000000, X, Y)
[Fri May  4 14:04:55 2012] Writing source region out to fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src4_src.reg
[Fri May  4 14:04:55 2012] Extracting stamp from image fullrun_mos1_xmm0505460201_pi300-10000_cl_sm2.00.img.gz, (164, 334) - (203, 373)
[Fri May  4 14:04:55 2012] XMMSAS bgd. selection expression = annulus(15908.910600, 30721.612200, 557.556514, 1115.113029, X, Y)
[Fri May  4 14:04:55 2012] Writing fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src4.gif
[Fri May  4 14:09:19 2012] Mean detx,y = (-2024.38, 9727.66) 
[Fri May  4 14:09:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 14:09:39 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 14:09:39 2012] Setting source spectrum file to fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May  4 14:09:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri May  4 14:29:17 2012] Not generating rmf since there are only 46 counts
[Fri May  4 14:29:17 2012] rmf not generated due to insufficient counts
[Fri May  4 15:00:50 2012] Updating aperture counts using extracted products
[Fri May  4 15:00:50 2012] Error reading totcts from fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May  4 15:00:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 15:00:51 2012] Using photon index=1.80, rate=0.00167, arf fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src4.arf
[Fri May  4 15:00:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 15:00:51 2012] Updating source flux to 3.3e-14
[Fri May  4 15:00:58 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting