[Fri May  4 04:10:45 2012] Detection parameters:
  Position = (267.8, 111.9) = 22 14 1.22 -18 5 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 402.9 +/- 25.1
  Background counts = 16.2
  Rate = 0.01 +/- 0.0009

[Fri May  4 04:10:47 2012] Off-axis axis estimate = 13.70'
[Fri May  4 06:21:44 2012] Using EEF radius (= 13.28 ")to estimate initial spatial extent for simple fitting
[Fri May  4 06:21:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  4 06:21:44 2012] Initial guess for spatial extent in simple fitting = 13.28"
[Fri May  4 06:21:44 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.970
[Fri May  4 06:21:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.28"
[Fri May  4 07:08:36 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_src1.ximg exists
[Fri May  4 07:08:36 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May  4 07:08:36 2012] Fit fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri May  4 07:08:36 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May  4 07:08:36 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May  4 07:08:36 2012] Fit fullrun_mos1_xmm0505460201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May  4 08:16:48 2012] Spatial fit model total counts = 635.997000, observed total counts = 636.000000
[Fri May  4 08:16:48 2012] Offset between fit and detection position for source 1 = 0.125072 pixels
[Fri May  4 08:16:48 2012] 635.729000 total counts/ 379.049000 bgd. counts: snr = 13.183914
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.125072 pixels
  Position = (267.9, 111.9) = 22 14 1.18 -18 5 11.9
  Extent = 5.8 (5.1-6.5)", rotation angle = 0
  Source counts = 256.7 +/- 25.2
  Background counts = 379.0
  Rate = 0.009 +/- 0.0009
[Fri May  4 08:16:48 2012] Vigneting correction estimate = 1.000000
[Fri May  4 08:16:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 08:16:48 2012] Assessing source extent using major axis lower bound
[Fri May  4 08:16:48 2012] Source does appear to be extended
[Fri May  4 08:16:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 10:24:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  4 10:24:47 2012] Initial guess for spatial extent in simple fitting = 5.78"
[Fri May  4 10:24:47 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.196
[Fri May  4 10:24:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.78"
[Fri May  4 11:07:42 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_src1.ximg exists
[Fri May  4 11:07:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_src1.csv
[Fri May  4 11:07:42 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May  4 11:07:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_src1.csv
[Fri May  4 11:07:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 11:07:43 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May  4 11:07:43 2012] fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May  4 11:07:43 2012] Fit fullrun_mos1_xmm0505460201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May  4 12:25:17 2012] Spatial fit model total counts = 428.985000, observed total counts = 429.000000
[Fri May  4 12:25:17 2012] Offset between fit and detection position for source 1 = 0.018315 pixels
[Fri May  4 12:25:17 2012] 428.662000 total counts/ 178.615000 bgd. counts: snr = 18.709522
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.018315 pixels
  Position = (267.9, 111.9) = 22 14 1.18 -18 5 12.0
  Extent = 5.6 (4.9-6.3)", rotation angle = 0
  Source counts = 250.0 +/- 20.7
  Background counts = 178.6
  Rate = 0.009 +/- 0.0007
[Fri May  4 12:25:17 2012] Vigneting correction estimate = 1.000000
[Fri May  4 12:25:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 12:25:17 2012] Assessing source extent using major axis lower bound
[Fri May  4 12:25:17 2012] Source does appear to be extended
[Fri May  4 12:25:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 14:04:55 2012] XMMSAS src. selection expression = ellipse(23257.949160, 9687.406200, 338.639410, 338.639410, 0.000000, X, Y)
[Fri May  4 14:04:55 2012] Writing source region out to fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src1_src.reg
[Fri May  4 14:04:55 2012] Extracting stamp from image fullrun_mos1_xmm0505460201_pi300-10000_cl_sm2.00.img.gz, (248, 92) - (287, 131)
[Fri May  4 14:04:55 2012] XMMSAS bgd. selection expression = annulus(23257.949160, 9687.406200, 564.399016, 1128.798032, X, Y)
[Fri May  4 14:04:55 2012] Writing fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src1.gif
[Fri May  4 14:04:59 2012] Mean detx,y = (14617.54, -5075.87) 
[Fri May  4 14:05:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 14:05:18 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 14:05:19 2012] Setting source spectrum file to fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May  4 14:05:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May  4 15:00:49 2012] Updating aperture counts using extracted products
[Fri May  4 15:00:50 2012] Error reading totcts from fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May  4 15:00:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 15:00:51 2012] Using photon index=1.80, rate=0.00906, arf fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src1.arf
[Fri May  4 15:00:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 15:00:51 2012] Updating source flux to 3.1e-13
[Fri May  4 15:01:21 2012] Reading fit data from xmm0505460201/analysis//spectral/fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src1_pl.csv
[Fri May  4 15:01:21 2012] Spectral fit parameter nH value = 3.71575e+19
[Fri May  4 15:01:21 2012] Spectral fit parameter PhoIndex value = 2.1407
[Fri May  4 15:01:21 2012] Failed to get F(0.3-8.0) from xmm0505460201/analysis//spectral/fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri May  4 15:01:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 15:01:21 2012] Using Nh = 3.7e+19, photon index=2.14, rate=0.00906, arf fullrun_mos1_xmm0505460201_pi300-10000_pass1_cl_src1.arf
[Fri May  4 15:01:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 15:01:21 2012] Updating source flux to 2.7e-13