[Tue Nov 29 02:02:12 2011] Detection parameters:
  Position = (280.6, 283.0) = 21 25 1.17 -8 13 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5651.9 +/- 98.4
  Background counts = 654.1
  Rate = 0.2 +/- 0.004

[Tue Nov 29 02:02:12 2011] Off-axis axis estimate = 1.71'
[Tue Nov 29 02:19:06 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 02:19:06 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Nov 29 02:19:06 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Tue Nov 29 02:19:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Nov 29 02:28:24 2011] fullrun_pn_xmm0505410101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Nov 29 02:28:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505410101_pi300-10000_cl_pass0_src1.csv
[Tue Nov 29 02:28:24 2011] fullrun_pn_xmm0505410101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Nov 29 02:28:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505410101_pi300-10000_cl_pass0_src1.csv
[Tue Nov 29 02:28:24 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505410101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505410101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 02:28:24 2011] fullrun_pn_xmm0505410101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Nov 29 02:28:24 2011] fullrun_pn_xmm0505410101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Nov 29 02:28:24 2011] Fit fullrun_pn_xmm0505410101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Nov 29 03:20:06 2011] Spatial fit model total counts = 10710.700000, observed total counts = 10694.000000
[Tue Nov 29 03:20:06 2011] Offset between fit and detection position for source 1 = 0.022069 pixels
[Tue Nov 29 03:20:06 2011] 10750.330000 total counts/ 7080.590000 bgd. counts: snr = 43.611455
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.022069 pixels
  Position = (280.6, 283.0) = 21 25 1.18 -8 13 29.9
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 3669.7 +/- 103.7
  Background counts = 7080.6
  Rate = 0.1 +/- 0.003
[Tue Nov 29 03:20:06 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 03:20:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 03:20:06 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 03:20:06 2011] Source does appear to be extended
[Tue Nov 29 03:20:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 03:20:06 2011] Source is confused with source 2
[Tue Nov 29 03:20:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov 29 03:20:20 2011] Initial guess for spatial extent in simple fitting = 5.33"
[Tue Nov 29 03:20:20 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.008
[Tue Nov 29 03:20:20 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.33"
[Tue Nov 29 03:39:53 2011] fullrun_pn_xmm0505410101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Nov 29 03:39:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505410101_pi300-10000_cl_pass1_src1.csv
[Tue Nov 29 03:39:53 2011] fullrun_pn_xmm0505410101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Nov 29 03:39:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505410101_pi300-10000_cl_pass1_src1.csv
[Tue Nov 29 03:39:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505410101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505410101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 03:39:53 2011] fullrun_pn_xmm0505410101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Nov 29 03:39:53 2011] fullrun_pn_xmm0505410101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Nov 29 03:39:53 2011] Fit fullrun_pn_xmm0505410101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Nov 29 04:39:07 2011] Warning, spatial fit 1 centroid is now closest to src. 2
[Tue Nov 29 04:39:07 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 04:39:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 04:39:07 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 04:39:07 2011] Source does appear to be extended
[Tue Nov 29 04:39:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:39:22 2011] Counts = 3669.740000, rescaling region sizes by 2.000000
[Tue Nov 29 04:39:22 2011] XMMSAS src. selection expression = ellipse(24359.531200, 24574.777000, 639.579618, 639.579618, 0.000000, X, Y)
[Tue Nov 29 04:39:22 2011] Writing source region out to fullrun_pn_xmm0505410101_pi300-10000_pass1_cl_src1_src.reg
[Tue Nov 29 04:39:22 2011] Extracting stamp from image fullrun_pn_xmm0505410101_pi300-10000_cl_sm2.00.img.gz, (244, 246) - (317, 320)
[Tue Nov 29 04:39:22 2011] XMMSAS bgd. selection expression = annulus(24359.531200, 24574.777000, 2131.932061, 4263.864123, X, Y) && !ellipse(24310.744600, 24954.554000, 1149.888033, 629.857618, 46.718000, X, Y) && !ellipse(24445.786600, 28748.463600, 1130.040033, 1130.040033, 0.000000, X, Y)
[Tue Nov 29 04:39:22 2011] Writing fullrun_pn_xmm0505410101_pi300-10000_pass1_cl_src1.gif
[Tue Nov 29 04:45:55 2011] Mean detx,y = (64.21, -249.22) 
[Tue Nov 29 04:46:12 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 04:46:59 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 04:47:00 2011] Setting source spectrum file to fullrun_pn_xmm0505410101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Nov 29 04:47:00 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505410101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Nov 29 05:55:28 2011] Updating aperture counts using extracted products
[Tue Nov 29 05:55:28 2011] Error reading totcts from fullrun_pn_xmm0505410101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Nov 29 05:55:29 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 05:55:29 2011] Using photon index=1.80, rate=0.1, arf fullrun_pn_xmm0505410101_pi300-10000_pass1_cl_src1.arf
[Tue Nov 29 05:55:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 05:55:29 2011] Updating source flux to 2.4e-13
[Tue Nov 29 05:56:28 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Nov 29 05:57:19 2011] Reading fit data from xmm0505410101/analysis//spectral/fullrun_pn_xmm0505410101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Nov 29 05:57:19 2011] Spectral fit parameter nH value = 9.88246e+19
[Tue Nov 29 05:57:19 2011] Spectral fit parameter PhoIndex value = 1.37055
[Tue Nov 29 05:57:19 2011] Failed to get F(0.3-8.0) from xmm0505410101/analysis//spectral/fullrun_pn_xmm0505410101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Nov 29 05:57:19 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 05:57:19 2011] Using Nh = 9.9e+19, photon index=1.37, rate=0.1, arf fullrun_pn_xmm0505410101_pi300-10000_pass1_cl_src1.arf
[Tue Nov 29 05:57:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 05:57:19 2011] Updating source flux to 3.4e-13