[Tue Nov 29 02:03:14 2011] Detection parameters:
  Position = (236.4, 98.7) = 21 25 14.14 -8 26 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.6 +/- 15.5
  Background counts = 64.6
  Rate = 0.002 +/- 0.0004

[Tue Nov 29 02:03:14 2011] Off-axis axis estimate = 15.16'
[Tue Nov 29 02:42:25 2011] Using EEF radius (= 14.01 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 02:42:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov 29 02:42:25 2011] Initial guess for spatial extent in simple fitting = 14.01"
[Tue Nov 29 02:42:25 2011] source mask rpix=3.2, npix_max = 55, mask sum = 28, frac = 0.506
[Tue Nov 29 02:42:25 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 14.01"
[Tue Nov 29 03:20:03 2011] fullrun_mos2_xmm0505410101_pi300-10000_cl_pass0_src10.ximg exists
[Tue Nov 29 03:20:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505410101_pi300-10000_cl_pass0_src10.csv
[Tue Nov 29 03:20:03 2011] fullrun_mos2_xmm0505410101_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Nov 29 03:20:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505410101_pi300-10000_cl_pass0_src10.csv
[Tue Nov 29 03:20:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505410101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505410101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 03:20:03 2011] fullrun_mos2_xmm0505410101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Nov 29 03:20:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505410101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Nov 29 03:20:03 2011] fullrun_mos2_xmm0505410101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Nov 29 03:20:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505410101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Nov 29 03:20:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505410101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505410101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 03:20:12 2011] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 18.890459 pixels away
[Tue Nov 29 03:20:12 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 03:20:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 03:20:12 2011] Assessing source extent using major
[Tue Nov 29 03:20:12 2011] Source does appear to be extended
[Tue Nov 29 03:20:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 03:53:41 2011] Using EEF radius (= 14.01 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 03:53:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov 29 03:53:41 2011] Initial guess for spatial extent in simple fitting = 14.01"
[Tue Nov 29 03:53:41 2011] source mask rpix=3.2, npix_max = 55, mask sum = 28, frac = 0.506
[Tue Nov 29 03:53:41 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 14.01"
[Tue Nov 29 04:39:03 2011] fullrun_mos2_xmm0505410101_pi300-10000_cl_pass1_src10.ximg exists
[Tue Nov 29 04:39:03 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505410101_pi300-10000_cl_pass1_src10.csv
[Tue Nov 29 04:39:03 2011] fullrun_mos2_xmm0505410101_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Nov 29 04:39:03 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505410101_pi300-10000_cl_pass1_src10.csv
[Tue Nov 29 04:39:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505410101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505410101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 04:39:03 2011] fullrun_mos2_xmm0505410101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Nov 29 04:39:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505410101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Nov 29 04:39:03 2011] fullrun_mos2_xmm0505410101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Nov 29 04:39:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505410101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Nov 29 04:39:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505410101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505410101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 04:39:13 2011] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 19.367967 pixels away
[Tue Nov 29 04:39:13 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 04:39:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 04:39:13 2011] Assessing source extent using major
[Tue Nov 29 04:39:13 2011] Source does appear to be extended
[Tue Nov 29 04:39:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 05:33:21 2011] XMMSAS src. selection expression = ellipse(20514.344803, 8542.145981, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 05:33:21 2011] Writing source region out to fullrun_mos2_xmm0505410101_pi300-10000_pass1_cl_src13_src.reg
[Tue Nov 29 05:33:21 2011] Extracting stamp from image fullrun_mos2_xmm0505410101_pi300-10000_cl_sm2.00.img.gz, (199, 61) - (274, 136)
[Tue Nov 29 05:33:21 2011] XMMSAS bgd. selection expression = annulus(20514.344803, 8542.145981, 1087.500000, 2175.000000, X, Y)
[Tue Nov 29 05:33:21 2011] Writing fullrun_mos2_xmm0505410101_pi300-10000_pass1_cl_src13.gif
[Tue Nov 29 05:38:51 2011] Mean detx,y = (936.42, 16384.74) 
[Tue Nov 29 05:38:53 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 05:39:30 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 05:39:31 2011] Setting source spectrum file to fullrun_mos2_xmm0505410101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Nov 29 05:39:31 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505410101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Nov 29 05:54:03 2011] Not generating rmf since there are only 79 counts
[Tue Nov 29 05:54:03 2011] rmf not generated due to insufficient counts
[Tue Nov 29 05:55:30 2011] Updating aperture counts using extracted products
[Tue Nov 29 05:55:30 2011] Error reading totcts from fullrun_mos2_xmm0505410101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Nov 29 05:55:31 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 05:55:31 2011] Using photon index=1.80, rate=0.0022, arf fullrun_mos2_xmm0505410101_pi300-10000_pass1_cl_src13.arf
[Tue Nov 29 05:55:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 05:55:31 2011] Updating source flux to 9.9e-14
[Tue Nov 29 05:56:06 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting