[Fri May 31 21:13:47 2013] Detection parameters:
  Position = (318.6, 317.6) = 1 39 55.49 6 19 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.1 +/- 20.1
  Background counts = 107.7
  Rate = 0.003 +/- 0.0004

[Fri May 31 21:13:48 2013] Off-axis axis estimate = 2.02'
[Fri May 31 21:14:41 2013] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:41 2013] Initial guess for spatial extent in simple fitting = 7.44"
[Fri May 31 21:14:41 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.280
[Fri May 31 21:14:41 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 7.44"
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src28.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src28.csv
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src28.csv
[Fri May 31 21:14:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri May 31 21:14:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:15:02 2013] Warning, spatial fit 28 centroid is now closest to src. 31
[Fri May 31 21:15:02 2013] Spatial fit model total counts = 1363.220000, observed total counts = 1355.000000
[Fri May 31 21:15:02 2013] Offset between fit and detection position for source 30 = 1.822718 pixels
[Fri May 31 21:15:02 2013] Warning, changing simple spatial fit ID from 28 to 29
[Fri May 31 21:15:02 2013] 1342.926000 total counts/ 949.082000 bgd. counts: snr = 12.784165
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.822718 pixels
  Position = (317.7, 316.0) = 1 39 55.76 6 19 38.6
  Extent = 13.5 (11.3-14.6)", rotation angle = 0
  Source counts = 393.8 +/- 36.6
  Background counts = 949.1
  Rate = 0.006 +/- 0.0006
[Fri May 31 21:15:02 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:02 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:15:02 2013] Source does appear to be extended
[Fri May 31 21:15:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:15:02 2013] Source is confused with source 31
[Fri May 31 21:15:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:15:53 2013] Initial guess for spatial extent in simple fitting = 13.49"
[Fri May 31 21:15:53 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.079
[Fri May 31 21:15:53 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 13.49"
[Fri May 31 21:15:55 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src27.ximg exists
[Fri May 31 21:15:55 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri May 31 21:15:55 2013] Fit fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src27 appears to have run properly
[Fri May 31 21:15:55 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri May 31 21:15:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri May 31 21:15:55 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri May 31 21:15:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri May 31 21:15:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:15 2013] Spatial fit model total counts = 1584.180000, observed total counts = 1573.000000
[Fri May 31 21:16:15 2013] Offset between fit and detection position for source 30 = 1.059285 pixels
[Fri May 31 21:16:15 2013] 1575.632300 total counts/ 1494.510000 bgd. counts: snr = 2.098412
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.059285 pixels
  Position = (317.8, 315.0) = 1 39 55.73 6 19 34.0
  Extent = 9.0" x 4.8", rotation angle = 100
  Source counts = 81.1 +/- 39.7
  Background counts = 1494.5
  Rate = 0.001 +/- 0.0006
[Fri May 31 21:16:15 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:15 2013] Assessing source extent using major
[Fri May 31 21:16:15 2013] Source does appear to be extended
[Fri May 31 21:16:15 2013] Computing asymmetry using major and minor axis, asym = 1.90
[Fri May 31 21:16:15 2013] Source is asymmetric
[Fri May 31 21:17:03 2013] XMMSAS src. selection expression = ellipse(27597.385000, 27355.640400, 541.698016, 285.784808, 100.076519, X, Y)
[Fri May 31 21:17:03 2013] Not overwriting source region fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30_src.reg
[Fri May 31 21:17:03 2013] Extracting stamp from image fullrun_pn_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (287, 284) - (349, 346)
[Fri May 31 21:17:03 2013] XMMSAS bgd. selection expression = annulus(27597.385000, 27355.640400, 902.830026, 1805.660052, X, Y) && !ellipse(28420.059601, 29033.793518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27384.773407, 29229.708130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27594.345800, 27474.150000, 1043.832030, 1043.832030, 0.000000, X, Y) && !ellipse(26071.091461, 26148.687347, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 21:17:03 2013] Writing fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30.gif
[Fri May 31 21:17:16 2013] ../../xmm0505400101/products/events/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0505400101/products/events/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create
[Fri May 31 21:17:16 2013] Mean detx,y = (0.42, -465.62) 
[Fri May 31 21:17:16 2013] ../../xmm0505400101/products/images/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30_src.img and ../../xmm0505400101/products/images/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create
[Fri May 31 21:17:16 2013] ../../xmm0505400101/products/spectra/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30_src_b10.pi.gz and ../../xmm0505400101/products/spectra/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create
[Fri May 31 21:17:16 2013] Setting source spectrum file to fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri May 31 21:17:16 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri May 31 21:17:16 2013] ../../xmm0505400101/products/lightcurves/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0505400101/products/lightcurves/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create
[Fri May 31 21:17:31 2013] Not generating rmf since there are only 81 counts
[Fri May 31 21:17:31 2013] rmf not generated due to insufficient counts
[Fri May 31 21:17:31 2013] fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30.arf exists, delete to re-create
[Fri May 31 22:28:26 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:27 2013] Total counts from fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 527.00
[Fri May 31 22:28:27 2013] Total counts from fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30_bgd.pi.gz = 2222.00
[Fri May 31 22:28:27 2013] Got source and background scale factors 488000.000000, 4133048.000000
[Fri May 31 22:28:27 2013] User source parameters:
  Position = (317.8, 315.0) = 1 39 55.73 6 19 34.0
  Extent = 9.0" x 4.8", rotation angle = 100
  Source aperture counts = 264.6 +/- 24.0
  Background aperture counts = 262.4
  Rate = 0.004 +/- 0.0004

[Fri May 31 22:28:32 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:32 2013] Using photon index=1.80, rate=0.00132, arf fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30.arf
[Fri May 31 22:28:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:32 2013] Updating source flux to 4.8e-15
[Fri May 31 22:29:12 2013] Flag c found in src. 30 procflags, skipping spectral fitting
[Fri May 31 22:29:12 2013] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 31 22:29:24 2013] xmm0505400101/analysis//spectral/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete