[Fri May 31 21:13:47 2013] Detection parameters:
  Position = (426.9, 334.6) = 1 39 23.89 6 20 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.6 +/- 17.6
  Background counts = 100.3
  Rate = 0.004 +/- 0.0005

[Fri May 31 21:13:48 2013] Off-axis axis estimate = 9.67'
[Fri May 31 21:14:41 2013] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:41 2013] Initial guess for spatial extent in simple fitting = 11.27"
[Fri May 31 21:14:41 2013] source mask rpix=2.6, npix_max = 38, mask sum = 29, frac = 0.759
[Fri May 31 21:14:41 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 11.27"
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src26.ximg exists
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri May 31 21:14:42 2013] Fit fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src26 appears to have run properly
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri May 31 21:14:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:15:02 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 17.163096 pixels away
[Fri May 31 21:15:02 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:02 2013] Assessing source extent using major
[Fri May 31 21:15:02 2013] Source does appear to be extended
[Fri May 31 21:15:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:15:53 2013] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:15:53 2013] Initial guess for spatial extent in simple fitting = 11.27"
[Fri May 31 21:15:53 2013] source mask rpix=2.6, npix_max = 38, mask sum = 29, frac = 0.759
[Fri May 31 21:15:53 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 11.27"
[Fri May 31 21:15:54 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src25.ximg exists
[Fri May 31 21:15:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src25.csv
[Fri May 31 21:15:54 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri May 31 21:15:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src25.csv
[Fri May 31 21:15:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:15:55 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri May 31 21:15:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri May 31 21:15:55 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri May 31 21:15:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri May 31 21:15:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:15 2013] Spatial fit model total counts = 1148.380000, observed total counts = 867.000000
[Fri May 31 21:16:15 2013] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 21:16:15 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:15 2013] Assessing source extent using major
[Fri May 31 21:16:15 2013] Source does appear to be extended
[Fri May 31 21:16:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:17:03 2013] XMMSAS src. selection expression = ellipse(37089.107269, 29066.006989, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 21:17:03 2013] Not overwriting source region fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28_src.reg
[Fri May 31 21:17:03 2013] Extracting stamp from image fullrun_pn_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (389, 297) - (464, 372)
[Fri May 31 21:17:03 2013] XMMSAS bgd. selection expression = annulus(37089.107269, 29066.006989, 1087.500000, 2175.000000, X, Y) && !ellipse(35583.126862, 30959.056152, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 21:17:03 2013] Writing fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28.gif
[Fri May 31 21:17:15 2013] ../../xmm0505400101/products/events/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28_src.evt and ../../xmm0505400101/products/events/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28_bgd.evt exist, delete to re-create
[Fri May 31 21:17:15 2013] Mean detx,y = (8199.00, -5424.78) 
[Fri May 31 21:17:15 2013] ../../xmm0505400101/products/images/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28_src.img and ../../xmm0505400101/products/images/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28_bgd.img exist, delete to re-create
[Fri May 31 21:17:15 2013] ../../xmm0505400101/products/spectra/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28_src_b10.pi.gz and ../../xmm0505400101/products/spectra/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28_bgd.pi exist, delete to re-create
[Fri May 31 21:17:15 2013] Setting source spectrum file to fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri May 31 21:17:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Fri May 31 21:17:15 2013] ../../xmm0505400101/products/lightcurves/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28_src.lc and ../../xmm0505400101/products/lightcurves/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28_bgd.lc exist, delete to re-create
[Fri May 31 21:17:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 31 21:17:31 2013] rmf not generated due to insufficient counts
[Fri May 31 21:17:31 2013] fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28.arf exists, delete to re-create
[Fri May 31 22:28:26 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:26 2013] Total counts from fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 617.00
[Fri May 31 22:28:26 2013] Total counts from fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 5102.00
[Fri May 31 22:28:26 2013] Got source and background scale factors 1033640.000000, 9858819.000000
[Fri May 31 22:28:26 2013] User source parameters:
  Position = (426.9, 334.6) = 1 39 23.89 6 20 58.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 82.1 +/- 25.9
  Background aperture counts = 534.9
  Rate = 0.001 +/- 0.0004

[Fri May 31 22:28:26 2013] Updating counts from extracted products
[Fri May 31 22:28:26 2013] Set source signif. to 82.08/23.13 = 3.55
[Fri May 31 22:28:32 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:32 2013] Using photon index=1.80, rate=0.00133, arf fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28.arf
[Fri May 31 22:28:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:32 2013] Updating source flux to 7.3e-15
[Fri May 31 22:29:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 22:29:24 2013] xmm0505400101/analysis//spectral/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete