[Fri May 31 21:13:47 2013] Detection parameters:
  Position = (369.8, 212.0) = 1 39 40.54 6 12 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.0 +/- 17.4
  Background counts = 89.9
  Rate = 0.004 +/- 0.0006

[Fri May 31 21:13:48 2013] Off-axis axis estimate = 8.13'
[Fri May 31 21:14:41 2013] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:41 2013] Initial guess for spatial extent in simple fitting = 10.49"
[Fri May 31 21:14:41 2013] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.737
[Fri May 31 21:14:41 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 10.49"
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src24.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src24.csv
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src24.csv
[Fri May 31 21:14:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri May 31 21:14:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:15:02 2013] Spatial fit model total counts = 1177.440000, observed total counts = 962.000000
[Fri May 31 21:15:02 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 21:15:02 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:02 2013] Assessing source extent using major
[Fri May 31 21:15:02 2013] Source does appear to be extended
[Fri May 31 21:15:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:15:53 2013] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:15:53 2013] Initial guess for spatial extent in simple fitting = 10.49"
[Fri May 31 21:15:53 2013] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.737
[Fri May 31 21:15:53 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 10.49"
[Fri May 31 21:15:54 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src23.ximg exists
[Fri May 31 21:15:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src23.csv
[Fri May 31 21:15:54 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri May 31 21:15:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src23.csv
[Fri May 31 21:15:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:15:55 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri May 31 21:15:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May 31 21:15:55 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri May 31 21:15:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May 31 21:15:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:15 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 14.861005 pixels away
[Fri May 31 21:16:15 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:15 2013] Assessing source extent using major
[Fri May 31 21:16:15 2013] Source does appear to be extended
[Fri May 31 21:16:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:17:03 2013] XMMSAS src. selection expression = ellipse(32127.632782, 18398.331589, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 21:17:03 2013] Not overwriting source region fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26_src.reg
[Fri May 31 21:17:03 2013] Extracting stamp from image fullrun_pn_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (332, 175) - (407, 250)
[Fri May 31 21:17:03 2013] XMMSAS bgd. selection expression = annulus(32127.632782, 18398.331589, 1087.500000, 2175.000000, X, Y) && !ellipse(31356.193560, 19369.896000, 410.554412, 410.554412, 0.000000, X, Y) && !ellipse(33839.988617, 18648.882721, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 21:17:03 2013] Writing fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26.gif
[Fri May 31 21:17:14 2013] ../../xmm0505400101/products/events/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0505400101/products/events/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Fri May 31 21:17:14 2013] Mean detx,y = (7329.64, 6312.88) 
[Fri May 31 21:17:14 2013] ../../xmm0505400101/products/images/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26_src.img and ../../xmm0505400101/products/images/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Fri May 31 21:17:14 2013] ../../xmm0505400101/products/spectra/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26_src_b10.pi.gz and ../../xmm0505400101/products/spectra/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Fri May 31 21:17:14 2013] Setting source spectrum file to fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri May 31 21:17:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri May 31 21:17:14 2013] ../../xmm0505400101/products/lightcurves/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0505400101/products/lightcurves/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Fri May 31 21:17:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 31 21:17:31 2013] rmf not generated due to insufficient counts
[Fri May 31 21:17:31 2013] fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26.arf exists, delete to re-create
[Fri May 31 22:28:25 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:25 2013] Total counts from fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 647.00
[Fri May 31 22:28:25 2013] Total counts from fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 2454.00
[Fri May 31 22:28:25 2013] Got source and background scale factors 1044469.000000, 4662281.000000
[Fri May 31 22:28:25 2013] User source parameters:
  Position = (369.8, 212.0) = 1 39 40.54 6 12 4.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 97.2 +/- 26.5
  Background aperture counts = 549.8
  Rate = 0.002 +/- 0.0004

[Fri May 31 22:28:25 2013] Updating counts from extracted products
[Fri May 31 22:28:25 2013] Set source signif. to 97.24/23.45 = 4.15
[Fri May 31 22:28:32 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:32 2013] Using photon index=1.80, rate=0.00158, arf fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26.arf
[Fri May 31 22:28:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:32 2013] Updating source flux to 9e-15
[Fri May 31 22:29:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 22:29:24 2013] xmm0505400101/analysis//spectral/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete