[Fri May 31 21:13:46 2013] Detection parameters:
  Position = (281.7, 378.0) = 1 40 6.26 6 24 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.8 +/- 18.4
  Background counts = 99.1
  Rate = 0.004 +/- 0.0005

[Fri May 31 21:13:48 2013] Off-axis axis estimate = 5.90'
[Fri May 31 21:14:41 2013] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:41 2013] Initial guess for spatial extent in simple fitting = 9.38"
[Fri May 31 21:14:41 2013] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.851
[Fri May 31 21:14:41 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 9.38"
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src19.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src19.csv
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src19.csv
[Fri May 31 21:14:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri May 31 21:14:42 2013] Fit fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Fri May 31 21:15:02 2013] Source 21 is offset by -0.353166 and -4.025376 pixels which is larger than
2 X fitted extent = 1.121035 x 1.121035, not incorporating fit results
[Fri May 31 21:15:02 2013] Spatial fit model total counts = 1288.520000, observed total counts = 1252.000000
[Fri May 31 21:15:02 2013] Offset between fit and detection position for source 21 = 0.760262 pixels
[Fri May 31 21:15:02 2013] 1275.566500 total counts/ 1215.290000 bgd. counts: snr = 1.729052
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.760262 pixels
  Position = (281.7, 378.8) = 1 40 6.26 6 24 11.4
  Extent = 4.8 (2.3-7.2)", rotation angle = 0
  Source counts = 60.3 +/- 35.7
  Background counts = 1215.3
  Rate = 0.001 +/- 0.0006
[Fri May 31 21:15:02 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:02 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:15:02 2013] Source does appear to be extended
[Fri May 31 21:15:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:15:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:15:53 2013] Initial guess for spatial extent in simple fitting = 4.84"
[Fri May 31 21:15:53 2013] source mask rpix=1.1, npix_max = 10, mask sum = 7, frac = 0.674
[Fri May 31 21:15:53 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 4.84"
[Fri May 31 21:15:54 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src19.ximg exists
[Fri May 31 21:15:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src19.csv
[Fri May 31 21:15:54 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri May 31 21:15:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src19.csv
[Fri May 31 21:15:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:15:55 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri May 31 21:15:55 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri May 31 21:15:55 2013] Fit fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri May 31 21:16:15 2013] Spatial fit model total counts = 1253.430000, observed total counts = 1217.000000
[Fri May 31 21:16:15 2013] Offset between fit and detection position for source 21 = 0.033700 pixels
[Fri May 31 21:16:15 2013] 1245.934900 total counts/ 1186.600000 bgd. counts: snr = 1.722495
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.033700 pixels
  Position = (281.7, 378.8) = 1 40 6.25 6 24 11.5
  Extent = 4.7 (2.2-7.3)", rotation angle = 0
  Source counts = 59.3 +/- 35.3
  Background counts = 1186.6
  Rate = 0.001 +/- 0.0006
[Fri May 31 21:16:15 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:15 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:16:15 2013] Source does appear to be extended
[Fri May 31 21:16:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:17:03 2013] XMMSAS src. selection expression = ellipse(24460.095400, 32905.549200, 283.575608, 283.575608, 0.000000, X, Y)
[Fri May 31 21:17:03 2013] Not overwriting source region fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21_src.reg
[Fri May 31 21:17:03 2013] Extracting stamp from image fullrun_pn_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (265, 362) - (298, 395)
[Fri May 31 21:17:03 2013] XMMSAS bgd. selection expression = annulus(24460.095400, 32905.549200, 472.626014, 945.252027, X, Y) && !ellipse(25141.366000, 31671.712000, 359.553610, 359.553610, 0.000000, X, Y) && !ellipse(25269.713348, 33867.959351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24488.229370, 32138.000671, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 21:17:03 2013] Writing fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21.gif
[Fri May 31 21:17:12 2013] ../../xmm0505400101/products/events/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0505400101/products/events/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Fri May 31 21:17:13 2013] Mean detx,y = (-4878.09, -4528.24) 
[Fri May 31 21:17:13 2013] ../../xmm0505400101/products/images/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21_src.img and ../../xmm0505400101/products/images/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Fri May 31 21:17:13 2013] ../../xmm0505400101/products/spectra/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0505400101/products/spectra/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Fri May 31 21:17:13 2013] Setting source spectrum file to fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri May 31 21:17:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri May 31 21:17:13 2013] ../../xmm0505400101/products/lightcurves/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0505400101/products/lightcurves/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Fri May 31 21:17:31 2013] Not generating rmf since there are only 59 counts
[Fri May 31 21:17:31 2013] rmf not generated due to insufficient counts
[Fri May 31 21:17:31 2013] fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21.arf exists, delete to re-create
[Fri May 31 22:28:24 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:24 2013] Total counts from fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 181.00
[Fri May 31 22:28:24 2013] Total counts from fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 439.00
[Fri May 31 22:28:24 2013] Got source and background scale factors 220315.000000, 798400.000000
[Fri May 31 22:28:24 2013] User source parameters:
  Position = (281.7, 378.8) = 1 40 6.25 6 24 11.5
  Extent = 4.7 (2.2-7.3)", rotation angle = 0
  Source aperture counts = 59.9 +/- 14.5
  Background aperture counts = 121.1
  Rate = 0.001 +/- 0.0002

[Fri May 31 22:28:32 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:32 2013] Using photon index=1.80, rate=0.000965, arf fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21.arf
[Fri May 31 22:28:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:32 2013] Updating source flux to 6.2e-15
[Fri May 31 22:29:12 2013] Flag b found in src. 21 procflags, skipping spectral fitting
[Fri May 31 22:29:12 2013] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 31 22:29:24 2013] xmm0505400101/analysis//spectral/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete