[Fri May 31 21:13:46 2013] Detection parameters:
  Position = (327.2, 334.3) = 1 39 52.97 6 20 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 437.4 +/- 28.5
  Background counts = 104.0
  Rate = 0.009 +/- 0.0006

[Fri May 31 21:13:48 2013] Off-axis axis estimate = 3.33'
[Fri May 31 21:14:41 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:41 2013] Initial guess for spatial extent in simple fitting = 8.10"
[Fri May 31 21:14:41 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.121
[Fri May 31 21:14:41 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 8.10"
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src10.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src10.csv
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src10.csv
[Fri May 31 21:14:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 31 21:14:42 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri May 31 21:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 31 21:14:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:15:02 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 10.898229 pixels away
[Fri May 31 21:15:02 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:02 2013] Assessing source extent using major
[Fri May 31 21:15:02 2013] Source does appear to be extended
[Fri May 31 21:15:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:15:53 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:15:53 2013] Initial guess for spatial extent in simple fitting = 8.10"
[Fri May 31 21:15:53 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.121
[Fri May 31 21:15:53 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 8.10"
[Fri May 31 21:15:54 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src10.ximg exists
[Fri May 31 21:15:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src10.csv
[Fri May 31 21:15:54 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri May 31 21:15:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src10.csv
[Fri May 31 21:15:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:15:55 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri May 31 21:15:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri May 31 21:15:55 2013] fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri May 31 21:15:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri May 31 21:15:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:15 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 10.898229 pixels away
[Fri May 31 21:16:15 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:15 2013] Assessing source extent using major
[Fri May 31 21:16:15 2013] Source does appear to be extended
[Fri May 31 21:16:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:17:03 2013] XMMSAS src. selection expression = ellipse(28420.059601, 29033.793518, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 21:17:03 2013] Not overwriting source region fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12_src.reg
[Fri May 31 21:17:03 2013] Extracting stamp from image fullrun_pn_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (290, 297) - (365, 372)
[Fri May 31 21:17:03 2013] XMMSAS bgd. selection expression = annulus(28420.059601, 29033.793518, 1087.500000, 2175.000000, X, Y) && !ellipse(27978.652000, 29992.628000, 438.985613, 438.985613, 0.000000, X, Y) && !ellipse(27384.773407, 29229.708130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27597.385000, 27355.640400, 722.264021, 381.046411, 100.076519, X, Y) && !ellipse(27594.345800, 27474.150000, 1043.832030, 1043.832030, 0.000000, X, Y) && !ellipse(26071.091461, 26148.687347, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 21:17:03 2013] Writing fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12.gif
[Fri May 31 21:17:08 2013] ../../xmm0505400101/products/events/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0505400101/products/events/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Fri May 31 21:17:09 2013] Mean detx,y = (102.34, -2334.06) 
[Fri May 31 21:17:09 2013] ../../xmm0505400101/products/images/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12_src.img and ../../xmm0505400101/products/images/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Fri May 31 21:17:09 2013] ../../xmm0505400101/products/spectra/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0505400101/products/spectra/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Fri May 31 21:17:09 2013] Setting source spectrum file to fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri May 31 21:17:09 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri May 31 21:17:09 2013] ../../xmm0505400101/products/lightcurves/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0505400101/products/lightcurves/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Fri May 31 21:17:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 31 21:17:31 2013] rmf not generated due to insufficient counts
[Fri May 31 21:17:31 2013] fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12.arf exists, delete to re-create
[Fri May 31 22:28:20 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:21 2013] Total counts from fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 985.00
[Fri May 31 22:28:21 2013] Total counts from fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12_bgd.pi.gz = 3505.00
[Fri May 31 22:28:21 2013] Got source and background scale factors 1115839.000000, 6808116.000000
[Fri May 31 22:28:21 2013] User source parameters:
  Position = (327.2, 334.3) = 1 39 52.97 6 20 58.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 410.5 +/- 32.4
  Background aperture counts = 574.5
  Rate = 0.007 +/- 0.0005

[Fri May 31 22:28:21 2013] Updating counts from extracted products
[Fri May 31 22:28:21 2013] Set source signif. to 410.54/23.97 = 17.13
[Fri May 31 22:28:31 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:31 2013] Using photon index=1.80, rate=0.00668, arf fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12.arf
[Fri May 31 22:28:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:31 2013] Updating source flux to 2.3e-14
[Fri May 31 22:29:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 22:29:24 2013] xmm0505400101/analysis//spectral/fullrun_pn_xmm0505400101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete