[Fri May 31 21:13:58 2013] Detection parameters:
  Position = (390.6, 487.5) = 1 39 34.47 6 32 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.8 +/- 10.3
  Background counts = 17.5
  Rate = 0.0007 +/- 0.0002

[Fri May 31 21:13:58 2013] Off-axis axis estimate = 15.25'
[Fri May 31 21:14:45 2013] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:45 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 21:14:45 2013] Initial guess for spatial extent in simple fitting = 14.05"
[Fri May 31 21:14:45 2013] source mask rpix=3.2, npix_max = 55, mask sum = 46, frac = 0.826
[Fri May 31 21:14:45 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 14.05"
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src48.ximg exists
[Fri May 31 21:14:47 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src48.csv
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src48_1.ximg exists
[Fri May 31 21:14:47 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src48.csv
[Fri May 31 21:14:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Fri May 31 21:14:47 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Fri May 31 21:14:47 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Fri May 31 21:14:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:15:28 2013] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 13.907298 pixels away
[Fri May 31 21:15:28 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:28 2013] Assessing source extent using major
[Fri May 31 21:15:28 2013] Source does appear to be extended
[Fri May 31 21:15:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:16:00 2013] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:16:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 21:16:00 2013] Initial guess for spatial extent in simple fitting = 14.05"
[Fri May 31 21:16:00 2013] source mask rpix=3.2, npix_max = 55, mask sum = 46, frac = 0.826
[Fri May 31 21:16:00 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 14.05"
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src44.ximg exists
[Fri May 31 21:16:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src44.csv
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri May 31 21:16:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src44.csv
[Fri May 31 21:16:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri May 31 21:16:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri May 31 21:16:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri May 31 21:16:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:39 2013] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 16.537581 pixels away
[Fri May 31 21:16:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:39 2013] Assessing source extent using major
[Fri May 31 21:16:39 2013] Source does appear to be extended
[Fri May 31 21:16:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:48:04 2013] XMMSAS src. selection expression = ellipse(33933.081909, 42360.168793, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 21:48:04 2013] Writing source region out to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src48_src.reg
[Fri May 31 21:48:04 2013] Extracting stamp from image fullrun_mos2_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (353, 450) - (428, 525)
[Fri May 31 21:48:04 2013] XMMSAS bgd. selection expression = annulus(33933.081909, 42360.168793, 1087.500000, 2175.000000, X, Y)
[Fri May 31 21:48:04 2013] Writing fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src48.gif
[Fri May 31 22:06:32 2013] Mean detx,y = (-401.98, 16488.04) 
[Fri May 31 22:06:35 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 22:07:00 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 22:07:00 2013] Setting source spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Fri May 31 22:07:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Fri May 31 22:26:20 2013] Not generating rmf since there are only 45 counts
[Fri May 31 22:26:20 2013] rmf not generated due to insufficient counts
[Fri May 31 22:28:56 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:56 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 136.00
[Fri May 31 22:28:56 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src48_bgd.pi.gz = 816.00
[Fri May 31 22:28:56 2013] Got source and background scale factors 715478.000000, 5239778.000000
[Fri May 31 22:28:56 2013] User source parameters:
  Position = (390.6, 487.5) = 1 39 34.47 6 32 2.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 24.6 +/- 12.7
  Background aperture counts = 111.4
  Rate = 0.0004 +/- 0.0002

[Fri May 31 22:28:56 2013] Updating counts from extracted products
[Fri May 31 22:28:56 2013] Set source signif. to 24.58/10.56 = 2.33
[Fri May 31 22:28:58 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:58 2013] Using photon index=1.80, rate=0.000387, arf fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src48.arf
[Fri May 31 22:28:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:58 2013] Updating source flux to 1.8e-14
[Fri May 31 22:29:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 22:29:12 2013] xmm0505400101/analysis//spectral/fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete