[Fri May 31 21:13:57 2013] Detection parameters:
  Position = (389.6, 214.5) = 1 39 34.78 6 12 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.7 +/- 12.7
  Background counts = 24.7
  Rate = 0.002 +/- 0.0003

[Fri May 31 21:13:58 2013] Off-axis axis estimate = 8.98'
[Fri May 31 21:14:45 2013] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:45 2013] Initial guess for spatial extent in simple fitting = 10.92"
[Fri May 31 21:14:45 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.993
[Fri May 31 21:14:45 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 10.92"
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src15.ximg exists
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri May 31 21:14:46 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src15 appears to have run properly
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri May 31 21:14:47 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri May 31 21:15:28 2013] Spatial fit model total counts = 306.372000, observed total counts = 306.000000
[Fri May 31 21:15:28 2013] Offset between fit and detection position for source 40 = 0.164306 pixels
[Fri May 31 21:15:28 2013] 312.840800 total counts/ 266.808000 bgd. counts: snr = 2.818175
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.164306 pixels
  Position = (389.5, 214.4) = 1 39 34.81 6 12 16.3
  Extent = 4.8 (2.7-7.1)", rotation angle = 0
  Source counts = 46.0 +/- 17.7
  Background counts = 266.8
  Rate = 0.0007 +/- 0.0003
[Fri May 31 21:15:28 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:28 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:15:28 2013] Source does appear to be extended
[Fri May 31 21:15:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:16:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:16:00 2013] Initial guess for spatial extent in simple fitting = 4.78"
[Fri May 31 21:16:00 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.880
[Fri May 31 21:16:00 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 4.78"
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src15.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src15.csv
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src15.csv
[Fri May 31 21:16:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri May 31 21:16:01 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Fri May 31 21:16:39 2013] Spatial fit model total counts = 299.999000, observed total counts = 300.000000
[Fri May 31 21:16:39 2013] Offset between fit and detection position for source 40 = 0.075255 pixels
[Fri May 31 21:16:39 2013] 304.081300 total counts/ 254.215000 bgd. counts: snr = 3.127567
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.075255 pixels
  Position = (389.5, 214.4) = 1 39 34.80 6 12 16.6
  Extent = 5.2 (2.9-7.3)", rotation angle = 0
  Source counts = 49.9 +/- 17.4
  Background counts = 254.2
  Rate = 0.0008 +/- 0.0003
[Fri May 31 21:16:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:39 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:16:39 2013] Source does appear to be extended
[Fri May 31 21:16:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:48:03 2013] XMMSAS src. selection expression = ellipse(33839.489200, 18607.654000, 313.882209, 313.882209, 0.000000, X, Y)
[Fri May 31 21:48:03 2013] Writing source region out to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src40_src.reg
[Fri May 31 21:48:03 2013] Extracting stamp from image fullrun_mos2_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (371, 196) - (408, 232)
[Fri May 31 21:48:03 2013] XMMSAS bgd. selection expression = annulus(33839.489200, 18607.654000, 523.137015, 1046.274030, X, Y)
[Fri May 31 21:48:03 2013] Writing fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src40.gif
[Fri May 31 21:54:58 2013] Mean detx,y = (-8822.87, -5565.37) 
[Fri May 31 21:55:00 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 21:55:13 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 21:55:13 2013] Setting source spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Fri May 31 21:55:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Fri May 31 22:22:39 2013] Not generating rmf since there are only 49 counts
[Fri May 31 22:22:39 2013] rmf not generated due to insufficient counts
[Fri May 31 22:28:49 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:49 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 93.00
[Fri May 31 22:28:49 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src40_bgd.pi.gz = 358.00
[Fri May 31 22:28:49 2013] Got source and background scale factors 312000.000000, 2562072.000000
[Fri May 31 22:28:49 2013] User source parameters:
  Position = (389.5, 214.4) = 1 39 34.80 6 12 16.6
  Extent = 5.2 (2.9-7.3)", rotation angle = 0
  Source aperture counts = 49.4 +/- 10.7
  Background aperture counts = 43.6
  Rate = 0.0008 +/- 0.0002

[Fri May 31 22:28:56 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:56 2013] Using photon index=1.80, rate=0.000785, arf fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src40.arf
[Fri May 31 22:28:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:56 2013] Updating source flux to 1.7e-14
[Fri May 31 22:29:07 2013] Source 40 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 31 22:29:12 2013] xmm0505400101/analysis//spectral/fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete