[Fri May 31 21:13:56 2013] Detection parameters:
  Position = (230.5, 270.5) = 1 40 21.19 6 16 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.1 +/- 12.5
  Background counts = 26.2
  Rate = 0.002 +/- 0.0003

[Fri May 31 21:13:58 2013] Off-axis axis estimate = 5.33'
[Fri May 31 21:14:45 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:45 2013] Initial guess for spatial extent in simple fitting = 9.09"
[Fri May 31 21:14:45 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.932
[Fri May 31 21:14:45 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 9.09"
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src17.ximg exists
[Fri May 31 21:14:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src17.csv
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri May 31 21:14:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src17.csv
[Fri May 31 21:14:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri May 31 21:14:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri May 31 21:14:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri May 31 21:14:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:15:28 2013] Source 29 is offset by 4.476595 and 8.474551 pixels which is larger than
2 X fitted extent = 1.128648 x 1.128648, not incorporating fit results
[Fri May 31 21:15:28 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.247085 pixels away
[Fri May 31 21:15:28 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:28 2013] Assessing source extent using major
[Fri May 31 21:15:28 2013] Source does appear to be extended
[Fri May 31 21:15:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:16:00 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:16:00 2013] Initial guess for spatial extent in simple fitting = 9.09"
[Fri May 31 21:16:00 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.932
[Fri May 31 21:16:00 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 9.09"
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src17.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src17.csv
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src17.csv
[Fri May 31 21:16:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri May 31 21:16:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:39 2013] Source 29 is offset by 4.476595 and 8.474551 pixels which is larger than
2 X fitted extent = 1.128648 x 1.128648, not incorporating fit results
[Fri May 31 21:16:39 2013] Spatial fit model total counts = 333.748000, observed total counts = 275.000000
[Fri May 31 21:16:39 2013] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 21:16:39 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 62.194405 pixels away
[Fri May 31 21:16:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:39 2013] Assessing source extent using major
[Fri May 31 21:16:39 2013] Source does appear to be extended
[Fri May 31 21:16:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:48:03 2013] XMMSAS src. selection expression = ellipse(20005.501801, 23485.323914, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 21:48:03 2013] Writing source region out to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src29_src.reg
[Fri May 31 21:48:03 2013] Extracting stamp from image fullrun_mos2_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (193, 233) - (268, 308)
[Fri May 31 21:48:03 2013] XMMSAS bgd. selection expression = annulus(20005.501801, 23485.323914, 1087.500000, 2175.000000, X, Y) && !ellipse(18841.878128, 21892.542633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19594.561676, 20548.662384, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 21:48:03 2013] Writing fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src29.gif
[Fri May 31 21:55:57 2013] Mean detx,y = (5847.01, -6020.33) 
[Fri May 31 21:55:59 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 21:56:38 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 21:56:39 2013] Setting source spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri May 31 21:56:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri May 31 22:22:50 2013] Not generating rmf since there are only 76 counts
[Fri May 31 22:22:50 2013] rmf not generated due to insufficient counts
[Fri May 31 22:28:49 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:49 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 226.00
[Fri May 31 22:28:49 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 1177.00
[Fri May 31 22:28:49 2013] Got source and background scale factors 1273018.000000, 8608180.000000
[Fri May 31 22:28:49 2013] User source parameters:
  Position = (230.5, 270.5) = 1 40 21.19 6 16 21.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 51.9 +/- 16.1
  Background aperture counts = 174.1
  Rate = 0.0008 +/- 0.0003

[Fri May 31 22:28:49 2013] Updating counts from extracted products
[Fri May 31 22:28:49 2013] Set source signif. to 51.94/13.19 = 3.94
[Fri May 31 22:28:56 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:56 2013] Using photon index=1.80, rate=0.000817, arf fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src29.arf
[Fri May 31 22:28:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:56 2013] Updating source flux to 1.3e-14
[Fri May 31 22:29:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 22:29:12 2013] xmm0505400101/analysis//spectral/fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete