[Fri May 31 21:13:55 2013] Detection parameters:
  Position = (491.4, 311.6) = 1 39 5.08 6 19 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.9 +/- 12.3
  Background counts = 24.0
  Rate = 0.0009 +/- 0.0002

[Fri May 31 21:13:58 2013] Off-axis axis estimate = 14.02'
[Fri May 31 21:14:45 2013] Using EEF radius (= 13.44 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:45 2013] Initial guess for spatial extent in simple fitting = 13.44"
[Fri May 31 21:14:45 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.951
[Fri May 31 21:14:45 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 13.44"
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src42.ximg exists
[Fri May 31 21:14:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src42.csv
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src42_1.ximg exists
[Fri May 31 21:14:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src42.csv
[Fri May 31 21:14:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Fri May 31 21:14:47 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Fri May 31 21:15:28 2013] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 17.495205 pixels away
[Fri May 31 21:15:28 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:28 2013] Assessing source extent using major
[Fri May 31 21:15:28 2013] Source does appear to be extended
[Fri May 31 21:15:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:16:00 2013] Using EEF radius (= 13.44 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:16:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 21:16:00 2013] Initial guess for spatial extent in simple fitting = 13.44"
[Fri May 31 21:16:00 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.951
[Fri May 31 21:16:00 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 13.44"
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src40.ximg exists
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri May 31 21:16:01 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src40 appears to have run properly
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri May 31 21:16:01 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Fri May 31 21:16:39 2013] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 12.527110 pixels away
[Fri May 31 21:16:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:39 2013] Assessing source extent using major
[Fri May 31 21:16:39 2013] Source does appear to be extended
[Fri May 31 21:16:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:48:04 2013] XMMSAS src. selection expression = ellipse(42699.595703, 27062.920135, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 21:48:04 2013] Writing source region out to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src24_src.reg
[Fri May 31 21:48:04 2013] Extracting stamp from image fullrun_mos2_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (454, 274) - (529, 349)
[Fri May 31 21:48:04 2013] XMMSAS bgd. selection expression = annulus(42699.595703, 27062.920135, 1087.500000, 2175.000000, X, Y)
[Fri May 31 21:48:04 2013] Writing fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src24.gif
[Fri May 31 22:04:54 2013] Mean detx,y = (-14032.66, 5523.73) 
[Fri May 31 22:04:56 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 22:05:23 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 22:05:23 2013] Setting source spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri May 31 22:05:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri May 31 22:25:39 2013] Not generating rmf since there are only 56 counts
[Fri May 31 22:25:39 2013] rmf not generated due to insufficient counts
[Fri May 31 22:28:54 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:55 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 196.00
[Fri May 31 22:28:55 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src24_bgd.pi.gz = 1040.00
[Fri May 31 22:28:55 2013] Got source and background scale factors 1340800.000000, 8139103.000000
[Fri May 31 22:28:55 2013] User source parameters:
  Position = (491.4, 311.6) = 1 39 5.08 6 19 17.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 24.7 +/- 15.0
  Background aperture counts = 171.3
  Rate = 0.0004 +/- 0.0002

[Fri May 31 22:28:55 2013] Updating counts from extracted products
[Fri May 31 22:28:55 2013] Set source signif. to 24.67/13.09 = 1.89
[Fri May 31 22:28:57 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:57 2013] Using photon index=1.80, rate=0.000388, arf fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src24.arf
[Fri May 31 22:28:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:57 2013] Updating source flux to 9.8e-15
[Fri May 31 22:29:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 22:29:12 2013] xmm0505400101/analysis//spectral/fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete