[Fri May 31 21:13:55 2013] Detection parameters:
  Position = (327.1, 334.6) = 1 39 53.01 6 20 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.5 +/- 17.0
  Background counts = 27.9
  Rate = 0.003 +/- 0.0003

[Fri May 31 21:13:58 2013] Off-axis axis estimate = 3.35'
[Fri May 31 21:14:45 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:45 2013] Initial guess for spatial extent in simple fitting = 8.10"
[Fri May 31 21:14:45 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.896
[Fri May 31 21:14:45 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.10"
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src5.ximg exists
[Fri May 31 21:14:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src5.csv
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri May 31 21:14:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src5.csv
[Fri May 31 21:14:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri May 31 21:14:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri May 31 21:14:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri May 31 21:14:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:15:28 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 11.488723 pixels away
[Fri May 31 21:15:28 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:28 2013] Assessing source extent using major
[Fri May 31 21:15:28 2013] Source does appear to be extended
[Fri May 31 21:15:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:16:00 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:16:00 2013] Initial guess for spatial extent in simple fitting = 8.10"
[Fri May 31 21:16:00 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.896
[Fri May 31 21:16:00 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 8.10"
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src5.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src5.csv
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src5.csv
[Fri May 31 21:16:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri May 31 21:16:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:39 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 16.162611 pixels away
[Fri May 31 21:16:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:39 2013] Assessing source extent using major
[Fri May 31 21:16:39 2013] Source does appear to be extended
[Fri May 31 21:16:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:48:03 2013] XMMSAS src. selection expression = ellipse(28406.468506, 29065.736176, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 21:48:03 2013] Writing source region out to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src21_src.reg
[Fri May 31 21:48:03 2013] Extracting stamp from image fullrun_mos2_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (290, 297) - (365, 372)
[Fri May 31 21:48:03 2013] XMMSAS bgd. selection expression = annulus(28406.468506, 29065.736176, 1087.500000, 2175.000000, X, Y) && !ellipse(27940.866400, 29998.012200, 368.148811, 368.148811, 0.000000, X, Y)
[Fri May 31 21:48:03 2013] Writing fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src21.gif
[Fri May 31 21:50:18 2013] Mean detx,y = (74.27, 2207.81) 
[Fri May 31 21:50:22 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 21:50:36 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 21:50:36 2013] Setting source spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri May 31 21:50:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri May 31 22:16:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 31 22:16:22 2013] rmf not generated due to insufficient counts
[Fri May 31 22:28:46 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:46 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 284.00
[Fri May 31 22:28:46 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 1498.00
[Fri May 31 22:28:46 2013] Got source and background scale factors 1221776.000000, 10401680.000000
[Fri May 31 22:28:46 2013] User source parameters:
  Position = (327.1, 334.6) = 1 39 53.01 6 20 59.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 108.0 +/- 17.9
  Background aperture counts = 176.0
  Rate = 0.002 +/- 0.0003

[Fri May 31 22:28:46 2013] Updating counts from extracted products
[Fri May 31 22:28:46 2013] Set source signif. to 108.05/13.26 = 8.15
[Fri May 31 22:28:56 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:56 2013] Using photon index=1.80, rate=0.0017, arf fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src21.arf
[Fri May 31 22:28:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:56 2013] Updating source flux to 1.8e-14
[Fri May 31 22:29:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 22:29:12 2013] xmm0505400101/analysis//spectral/fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete