[Fri May 31 21:13:55 2013] Detection parameters:
  Position = (322.0, 345.3) = 1 39 54.51 6 21 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.8 +/- 13.5
  Background counts = 28.3
  Rate = 0.001 +/- 0.0002

[Fri May 31 21:13:58 2013] Off-axis axis estimate = 3.80'
[Fri May 31 21:14:45 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:45 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Fri May 31 21:14:45 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.857
[Fri May 31 21:14:45 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 8.33"
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src24.ximg exists
[Fri May 31 21:14:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src24.csv
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri May 31 21:14:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src24.csv
[Fri May 31 21:14:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri May 31 21:14:47 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Fri May 31 21:15:28 2013] Spatial fit model total counts = 336.708000, observed total counts = 337.000000
[Fri May 31 21:15:28 2013] Offset between fit and detection position for source 20 = 0.243739 pixels
[Fri May 31 21:15:28 2013] 335.749800 total counts/ 281.308000 bgd. counts: snr = 3.245947
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.243739 pixels
  Position = (321.7, 345.4) = 1 39 54.58 6 21 46.1
  Extent = 4.7 (3.5-6.2)", rotation angle = 0
  Source counts = 54.4 +/- 18.3
  Background counts = 281.3
  Rate = 0.0009 +/- 0.0003
[Fri May 31 21:15:28 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:28 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:15:28 2013] Source does appear to be extended
[Fri May 31 21:15:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:16:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:16:00 2013] Initial guess for spatial extent in simple fitting = 4.66"
[Fri May 31 21:16:00 2013] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.912
[Fri May 31 21:16:00 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 4.66"
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src23.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src23.csv
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src23.csv
[Fri May 31 21:16:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri May 31 21:16:01 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri May 31 21:16:39 2013] Spatial fit model total counts = 338.984000, observed total counts = 340.000000
[Fri May 31 21:16:39 2013] Offset between fit and detection position for source 20 = 0.002375 pixels
[Fri May 31 21:16:39 2013] 339.193600 total counts/ 285.701000 bgd. counts: snr = 3.164738
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.002375 pixels
  Position = (321.7, 345.4) = 1 39 54.58 6 21 46.1
  Extent = 4.6 (3.5-6.1)", rotation angle = 0
  Source counts = 53.5 +/- 18.4
  Background counts = 285.7
  Rate = 0.0008 +/- 0.0003
[Fri May 31 21:16:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:39 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:16:39 2013] Source does appear to be extended
[Fri May 31 21:16:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:48:03 2013] XMMSAS src. selection expression = ellipse(27940.866400, 29998.012200, 276.111608, 276.111608, 0.000000, X, Y)
[Fri May 31 21:48:03 2013] Writing source region out to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src20_src.reg
[Fri May 31 21:48:03 2013] Extracting stamp from image fullrun_mos2_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (306, 329) - (338, 361)
[Fri May 31 21:48:03 2013] XMMSAS bgd. selection expression = annulus(27940.866400, 29998.012200, 460.186013, 920.372026, X, Y) && !ellipse(28406.468506, 29065.736176, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 21:48:03 2013] Writing fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src20.gif
[Fri May 31 21:58:36 2013] Mean detx,y = (782.93, 2919.89) 
[Fri May 31 21:58:39 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 21:58:49 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 21:58:50 2013] Setting source spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri May 31 21:58:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri May 31 22:23:35 2013] Not generating rmf since there are only 53 counts
[Fri May 31 22:23:35 2013] rmf not generated due to insufficient counts
[Fri May 31 22:28:51 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:51 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 89.00
[Fri May 31 22:28:51 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src20_bgd.pi.gz = 203.00
[Fri May 31 22:28:51 2013] Got source and background scale factors 241600.000000, 1380720.000000
[Fri May 31 22:28:51 2013] User source parameters:
  Position = (321.7, 345.4) = 1 39 54.58 6 21 46.1
  Extent = 4.6 (3.5-6.1)", rotation angle = 0
  Source aperture counts = 53.5 +/- 10.5
  Background aperture counts = 35.5
  Rate = 0.0008 +/- 0.0002

[Fri May 31 22:28:57 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:57 2013] Using photon index=1.80, rate=0.000842, arf fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src20.arf
[Fri May 31 22:28:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:57 2013] Updating source flux to 1.3e-14
[Fri May 31 22:29:07 2013] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 31 22:29:12 2013] xmm0505400101/analysis//spectral/fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete