[Fri May 31 21:13:53 2013] Detection parameters:
  Position = (302.3, 429.1) = 1 40 0.25 6 27 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.8 +/- 14.5
  Background counts = 22.6
  Rate = 0.002 +/- 0.0002

[Fri May 31 21:13:58 2013] Off-axis axis estimate = 9.48'
[Fri May 31 21:14:45 2013] Using EEF radius (= 11.17 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:45 2013] Initial guess for spatial extent in simple fitting = 11.17"
[Fri May 31 21:14:45 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.957
[Fri May 31 21:14:45 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 11.17"
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src21.ximg exists
[Fri May 31 21:14:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src21.csv
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri May 31 21:14:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src21.csv
[Fri May 31 21:14:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri May 31 21:14:47 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Fri May 31 21:15:28 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.990543 pixels away
[Fri May 31 21:15:28 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:28 2013] Assessing source extent using major
[Fri May 31 21:15:28 2013] Source does appear to be extended
[Fri May 31 21:15:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:16:00 2013] Using EEF radius (= 11.17 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:16:00 2013] Initial guess for spatial extent in simple fitting = 11.17"
[Fri May 31 21:16:00 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.957
[Fri May 31 21:16:00 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 11.17"
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src20.ximg exists
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri May 31 21:16:01 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src20 appears to have run properly
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri May 31 21:16:01 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Fri May 31 21:16:39 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.990543 pixels away
[Fri May 31 21:16:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:39 2013] Assessing source extent using major
[Fri May 31 21:16:39 2013] Source does appear to be extended
[Fri May 31 21:16:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:48:03 2013] XMMSAS src. selection expression = ellipse(26249.870514, 37282.340302, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 21:48:03 2013] Writing source region out to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src2_src.reg
[Fri May 31 21:48:03 2013] Extracting stamp from image fullrun_mos2_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (265, 392) - (340, 467)
[Fri May 31 21:48:03 2013] XMMSAS bgd. selection expression = annulus(26249.870514, 37282.340302, 1087.500000, 2175.000000, X, Y) && !ellipse(28652.969391, 35294.761475, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 21:48:03 2013] Writing fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src2.gif
[Fri May 31 21:57:25 2013] Mean detx,y = (4988.98, 9075.15) 
[Fri May 31 21:57:26 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 21:57:45 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 21:57:45 2013] Setting source spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 31 21:57:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri May 31 22:23:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 31 22:23:18 2013] rmf not generated due to insufficient counts
[Fri May 31 22:28:50 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:50 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 254.00
[Fri May 31 22:28:50 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1242.00
[Fri May 31 22:28:50 2013] Got source and background scale factors 1288528.000000, 10211736.000000
[Fri May 31 22:28:50 2013] User source parameters:
  Position = (302.3, 429.1) = 1 40 0.25 6 27 51.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 97.3 +/- 17.0
  Background aperture counts = 156.7
  Rate = 0.002 +/- 0.0003

[Fri May 31 22:28:50 2013] Updating counts from extracted products
[Fri May 31 22:28:50 2013] Set source signif. to 97.28/12.52 = 7.77
[Fri May 31 22:28:56 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:56 2013] Using photon index=1.80, rate=0.00153, arf fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src2.arf
[Fri May 31 22:28:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:56 2013] Updating source flux to 3.2e-14
[Fri May 31 22:29:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 22:29:12 2013] xmm0505400101/analysis//spectral/fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete