[Fri May 31 21:13:54 2013] Detection parameters:
  Position = (375.1, 158.0) = 1 39 39.02 6 8 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.0 +/- 13.4
  Background counts = 24.1
  Rate = 0.001 +/- 0.0002

[Fri May 31 21:13:58 2013] Off-axis axis estimate = 11.60'
[Fri May 31 21:14:45 2013] Using EEF radius (= 12.23 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:45 2013] Initial guess for spatial extent in simple fitting = 12.23"
[Fri May 31 21:14:45 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.821
[Fri May 31 21:14:45 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 12.23"
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src28.ximg exists
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri May 31 21:14:46 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src28 appears to have run properly
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri May 31 21:14:47 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Fri May 31 21:15:28 2013] Spatial fit model total counts = 392.443000, observed total counts = 391.000000
[Fri May 31 21:15:28 2013] Offset between fit and detection position for source 12 = 0.277487 pixels
[Fri May 31 21:15:28 2013] 395.081300 total counts/ 344.316000 bgd. counts: snr = 2.735825
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.277487 pixels
  Position = (375.3, 158.1) = 1 39 38.94 6 8 11.6
  Extent = 6.2 (4.1-8.4)", rotation angle = 354 (342-0) degrees
  Source counts = 50.8 +/- 19.9
  Background counts = 344.3
  Rate = 0.0008 +/- 0.0003
[Fri May 31 21:15:28 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:28 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:15:28 2013] Source does appear to be extended
[Fri May 31 21:15:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.18
[Fri May 31 21:15:28 2013] Source is confused with source 47
[Fri May 31 21:16:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:16:00 2013] Initial guess for spatial extent in simple fitting = 4.62"
[Fri May 31 21:16:00 2013] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.922
[Fri May 31 21:16:00 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 4.62"
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src27.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src27.csv
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src27.csv
[Fri May 31 21:16:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri May 31 21:16:01 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri May 31 21:16:39 2013] Spatial fit model total counts = 361.946000, observed total counts = 357.000000
[Fri May 31 21:16:39 2013] Offset between fit and detection position for source 12 = 0.109420 pixels
[Fri May 31 21:16:39 2013] 362.809300 total counts/ 321.362000 bgd. counts: snr = 2.312059
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.109420 pixels
  Position = (375.2, 158.1) = 1 39 38.98 6 8 11.5
  Extent = 3.4 (2.4-4.9)", rotation angle = 0
  Source counts = 41.4 +/- 19.0
  Background counts = 321.4
  Rate = 0.0007 +/- 0.0003
[Fri May 31 21:16:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:39 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:16:39 2013] Source does appear to be extended
[Fri May 31 21:16:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:48:03 2013] XMMSAS src. selection expression = ellipse(32595.363800, 13706.904400, 206.638206, 206.638206, 0.000000, X, Y)
[Fri May 31 21:48:03 2013] Writing source region out to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src12_src.reg
[Fri May 31 21:48:03 2013] Extracting stamp from image fullrun_mos2_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (363, 146) - (387, 170)
[Fri May 31 21:48:03 2013] XMMSAS bgd. selection expression = annulus(32595.363800, 13706.904400, 344.397010, 688.794020, X, Y) && !ellipse(32045.932220, 13969.706879, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 21:48:03 2013] Writing fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src12.gif
[Fri May 31 22:00:04 2013] Mean detx,y = (-9440.10, -10595.13) 
[Fri May 31 22:00:07 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 22:00:18 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 22:00:18 2013] Setting source spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri May 31 22:00:18 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri May 31 22:24:00 2013] Not generating rmf since there are only 41 counts
[Fri May 31 22:24:00 2013] rmf not generated due to insufficient counts
[Fri May 31 22:28:52 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:52 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 60.00
[Fri May 31 22:28:52 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src12_bgd.pi.gz = 65.00
[Fri May 31 22:28:52 2013] Got source and background scale factors 132800.000000, 494400.000000
[Fri May 31 22:28:52 2013] User source parameters:
  Position = (375.2, 158.1) = 1 39 38.98 6 8 11.5
  Extent = 3.4 (2.4-4.9)", rotation angle = 0
  Source aperture counts = 42.5 +/- 8.8
  Background aperture counts = 17.5
  Rate = 0.0007 +/- 0.0001

[Fri May 31 22:28:57 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:57 2013] Using photon index=1.80, rate=0.000652, arf fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src12.arf
[Fri May 31 22:28:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:57 2013] Updating source flux to 2.8e-14
[Fri May 31 22:29:07 2013] Flag c found in src. 12 procflags, skipping spectral fitting
[Fri May 31 22:29:07 2013] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 31 22:29:12 2013] xmm0505400101/analysis//spectral/fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete