[Fri May 31 21:13:53 2013] Detection parameters:
  Position = (360.9, 223.2) = 1 39 43.14 6 12 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 686.0 +/- 32.4
  Background counts = 25.4
  Rate = 0.02 +/- 0.0007

[Fri May 31 21:13:58 2013] Off-axis axis estimate = 7.09'
[Fri May 31 21:14:45 2013] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:45 2013] Initial guess for spatial extent in simple fitting = 9.97"
[Fri May 31 21:14:45 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.154
[Fri May 31 21:14:45 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.97"
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 31 21:14:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src1.csv
[Fri May 31 21:14:46 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 31 21:14:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src1.csv
[Fri May 31 21:14:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 31 21:14:47 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 31 21:14:47 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 31 21:15:28 2013] Spatial fit model total counts = 972.842000, observed total counts = 925.000000
[Fri May 31 21:15:28 2013] Offset between fit and detection position for source 1 = 0.137131 pixels
[Fri May 31 21:15:28 2013] 973.205000 total counts/ 488.518000 bgd. counts: snr = 21.929114
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.137131 pixels
  Position = (360.9, 223.3) = 1 39 43.15 6 12 55.2
  Extent = 5.4 (5.0-5.9)", rotation angle = 0
  Source counts = 484.7 +/- 31.2
  Background counts = 488.5
  Rate = 0.008 +/- 0.0005
[Fri May 31 21:15:28 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:28 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:15:28 2013] Source does appear to be extended
[Fri May 31 21:15:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:16:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:16:00 2013] Initial guess for spatial extent in simple fitting = 5.41"
[Fri May 31 21:16:00 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.986
[Fri May 31 21:16:00 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.41"
[Fri May 31 21:16:00 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src1.csv
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 31 21:16:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src1.csv
[Fri May 31 21:16:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 31 21:16:01 2013] fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 31 21:16:01 2013] Fit fullrun_mos2_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 31 21:16:39 2013] Spatial fit model total counts = 869.222000, observed total counts = 833.000000
[Fri May 31 21:16:39 2013] Offset between fit and detection position for source 1 = 0.001883 pixels
[Fri May 31 21:16:39 2013] 868.605000 total counts/ 396.838000 bgd. counts: snr = 23.682139
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001883 pixels
  Position = (360.9, 223.3) = 1 39 43.15 6 12 55.2
  Extent = 5.3 (4.8-5.7)", rotation angle = 0
  Source counts = 471.8 +/- 29.5
  Background counts = 396.8
  Rate = 0.007 +/- 0.0005
[Fri May 31 21:16:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:39 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:16:39 2013] Source does appear to be extended
[Fri May 31 21:16:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:48:03 2013] XMMSAS src. selection expression = ellipse(31348.363600, 19379.592400, 315.768609, 315.768609, 0.000000, X, Y)
[Fri May 31 21:48:03 2013] Writing source region out to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src1_src.reg
[Fri May 31 21:48:03 2013] Extracting stamp from image fullrun_mos2_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (343, 205) - (379, 241)
[Fri May 31 21:48:03 2013] XMMSAS bgd. selection expression = annulus(31348.363600, 19379.592400, 526.281015, 1052.562030, X, Y)
[Fri May 31 21:48:03 2013] Writing fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src1.gif
[Fri May 31 21:48:10 2013] Mean detx,y = (-6228.18, -5750.08) 
[Fri May 31 21:48:12 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 21:48:39 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 21:48:39 2013] Setting source spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 31 21:48:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 31 22:28:45 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:45 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 537.00
[Fri May 31 22:28:45 2013] Total counts from fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 374.00
[Fri May 31 22:28:45 2013] Got source and background scale factors 308800.000000, 2307168.000000
[Fri May 31 22:28:45 2013] User source parameters:
  Position = (360.9, 223.3) = 1 39 43.15 6 12 55.2
  Extent = 5.3 (4.8-5.7)", rotation angle = 0
  Source aperture counts = 486.9 +/- 24.2
  Background aperture counts = 50.1
  Rate = 0.008 +/- 0.0004

[Fri May 31 22:28:56 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:56 2013] Using photon index=1.80, rate=0.00742, arf fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src1.arf
[Fri May 31 22:28:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:56 2013] Updating source flux to 1.4e-13
[Fri May 31 22:29:12 2013] xmm0505400101/analysis//spectral/fullrun_mos2_xmm0505400101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete