[Fri May 31 21:13:51 2013] Detection parameters:
  Position = (318.0, 312.5) = 1 39 55.67 6 19 23.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.0 +/- 13.2
  Background counts = 27.8
  Rate = 0.001 +/- 0.0002

[Fri May 31 21:13:53 2013] Off-axis axis estimate = 1.75'
[Fri May 31 21:14:43 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:43 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Fri May 31 21:14:43 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.054
[Fri May 31 21:14:43 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 7.30"
[Fri May 31 21:14:44 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src26.ximg exists
[Fri May 31 21:14:44 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri May 31 21:14:44 2013] Fit fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src26 appears to have run properly
[Fri May 31 21:14:45 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri May 31 21:14:45 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri May 31 21:14:45 2013] Fit fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Fri May 31 21:15:14 2013] Spatial fit model total counts = 351.968000, observed total counts = 352.000000
[Fri May 31 21:15:14 2013] Offset between fit and detection position for source 28 = 0.341438 pixels
[Fri May 31 21:15:14 2013] 359.142200 total counts/ 319.755000 bgd. counts: snr = 2.202655
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.341438 pixels
  Position = (317.6, 312.5) = 1 39 55.77 6 19 23.0
  Extent = 3.0 (1.8-4.3)", rotation angle = 0
  Source counts = 39.4 +/- 19.0
  Background counts = 319.8
  Rate = 0.0006 +/- 0.0003
[Fri May 31 21:15:14 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:14 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:15:14 2013] Source does appear to be extended
[Fri May 31 21:15:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:15:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:15:55 2013] Initial guess for spatial extent in simple fitting = 3.00"
[Fri May 31 21:15:55 2013] source mask rpix=0.7, npix_max = 5, mask sum = 9, frac = 1.591
[Fri May 31 21:15:55 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 3.00"
[Fri May 31 21:15:59 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src25.ximg exists
[Fri May 31 21:15:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src25.csv
[Fri May 31 21:15:59 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri May 31 21:15:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src25.csv
[Fri May 31 21:15:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:00 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri May 31 21:16:00 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri May 31 21:16:00 2013] Fit fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Fri May 31 21:16:26 2013] Spatial fit model total counts = 351.998000, observed total counts = 352.000000
[Fri May 31 21:16:26 2013] Offset between fit and detection position for source 28 = 0.000120 pixels
[Fri May 31 21:16:26 2013] 359.173900 total counts/ 319.773000 bgd. counts: snr = 2.203359
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.000120 pixels
  Position = (317.6, 312.5) = 1 39 55.77 6 19 23.0
  Extent = 3.0 (1.1-4.3)", rotation angle = 0
  Source counts = 39.4 +/- 19.0
  Background counts = 319.8
  Rate = 0.0006 +/- 0.0003
[Fri May 31 21:16:26 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:26 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:16:26 2013] Source does appear to be extended
[Fri May 31 21:16:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:17:32 2013] XMMSAS src. selection expression = ellipse(27584.718400, 27134.781400, 179.767205, 179.767205, 0.000000, X, Y)
[Fri May 31 21:17:32 2013] Not overwriting source region fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src28_src.reg
[Fri May 31 21:17:32 2013] Extracting stamp from image fullrun_mos1_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (307, 302) - (328, 323)
[Fri May 31 21:17:32 2013] XMMSAS bgd. selection expression = annulus(27584.718400, 27134.781400, 299.612009, 599.224017, X, Y)
[Fri May 31 21:17:32 2013] Writing fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src28.gif
[Fri May 31 21:20:33 2013] Mean detx,y = (337.42, -252.91) 
[Fri May 31 21:20:35 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 21:20:44 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 21:20:44 2013] Setting source spectrum file to fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri May 31 21:20:44 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Fri May 31 21:45:53 2013] Not generating rmf since there are only 39 counts
[Fri May 31 21:45:53 2013] rmf not generated due to insufficient counts
[Fri May 31 22:28:39 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:39 2013] Total counts from fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 55.00
[Fri May 31 22:28:39 2013] Total counts from fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 153.00
[Fri May 31 22:28:39 2013] Got source and background scale factors 110400.000000, 854400.000000
[Fri May 31 22:28:39 2013] User source parameters:
  Position = (317.6, 312.5) = 1 39 55.77 6 19 23.0
  Extent = 3.0 (1.1-4.3)", rotation angle = 0
  Source aperture counts = 35.2 +/- 8.5
  Background aperture counts = 19.8
  Rate = 0.0006 +/- 0.0001

[Fri May 31 22:28:44 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:44 2013] Using photon index=1.80, rate=0.00062, arf fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src28.arf
[Fri May 31 22:28:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:44 2013] Updating source flux to 1e-14
[Fri May 31 22:29:01 2013] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 31 22:29:07 2013] xmm0505400101/analysis//spectral/fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete