[Fri May 31 21:13:51 2013] Detection parameters:
  Position = (191.7, 314.8) = 1 40 32.52 6 19 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.2 +/- 11.6
  Background counts = 23.1
  Rate = 0.0008 +/- 0.0002

[Fri May 31 21:13:53 2013] Off-axis axis estimate = 7.83'
[Fri May 31 21:14:43 2013] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:43 2013] Initial guess for spatial extent in simple fitting = 10.34"
[Fri May 31 21:14:43 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.087
[Fri May 31 21:14:43 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 10.34"
[Fri May 31 21:14:44 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src40.ximg exists
[Fri May 31 21:14:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src40.csv
[Fri May 31 21:14:44 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src40_1.ximg exists
[Fri May 31 21:14:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src40.csv
[Fri May 31 21:14:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:14:45 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Fri May 31 21:14:45 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Fri May 31 21:14:45 2013] Fit fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Fri May 31 21:15:14 2013] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 12.833620 pixels away
[Fri May 31 21:15:14 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:14 2013] Assessing source extent using major
[Fri May 31 21:15:14 2013] Source does appear to be extended
[Fri May 31 21:15:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:15:55 2013] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:15:55 2013] Initial guess for spatial extent in simple fitting = 10.34"
[Fri May 31 21:15:55 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.087
[Fri May 31 21:15:55 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 10.34"
[Fri May 31 21:15:59 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src37.ximg exists
[Fri May 31 21:15:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src37.csv
[Fri May 31 21:15:59 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri May 31 21:15:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src37.csv
[Fri May 31 21:15:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:00 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri May 31 21:16:00 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri May 31 21:16:00 2013] Fit fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Fri May 31 21:16:26 2013] Spatial fit model total counts = 318.993000, observed total counts = 319.000000
[Fri May 31 21:16:26 2013] Offset between fit and detection position for source 27 = 0.598931 pixels
[Fri May 31 21:16:26 2013] 314.157000 total counts/ 259.360000 bgd. counts: snr = 3.402556
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.598931 pixels
  Position = (191.2, 314.4) = 1 40 32.65 6 19 31.4
  Extent = 8.8 (5.8-15.7)", rotation angle = 0
  Source counts = 54.8 +/- 17.7
  Background counts = 259.4
  Rate = 0.0009 +/- 0.0003
[Fri May 31 21:16:26 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:26 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:16:26 2013] Source does appear to be extended
[Fri May 31 21:16:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:17:32 2013] XMMSAS src. selection expression = ellipse(16588.683200, 27305.085400, 526.405815, 526.405815, 0.000000, X, Y)
[Fri May 31 21:17:32 2013] Not overwriting source region fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src27_src.reg
[Fri May 31 21:17:32 2013] Extracting stamp from image fullrun_mos1_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (161, 284) - (221, 345)
[Fri May 31 21:17:32 2013] XMMSAS bgd. selection expression = annulus(16588.683200, 27305.085400, 877.343025, 1754.686050, X, Y)
[Fri May 31 21:17:32 2013] Writing fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src27.gif
[Fri May 31 21:25:06 2013] Mean detx,y = (-3447.39, -10591.96) 
[Fri May 31 21:25:08 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 21:25:20 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 21:25:20 2013] Setting source spectrum file to fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri May 31 21:25:20 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Fri May 31 21:47:17 2013] Not generating rmf since there are only 54 counts
[Fri May 31 21:47:17 2013] rmf not generated due to insufficient counts
[Fri May 31 22:28:42 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:42 2013] Total counts from fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 175.00
[Fri May 31 22:28:42 2013] Total counts from fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 940.00
[Fri May 31 22:28:42 2013] Got source and background scale factors 803944.000000, 7133440.000000
[Fri May 31 22:28:42 2013] User source parameters:
  Position = (191.2, 314.4) = 1 40 32.65 6 19 31.4
  Extent = 8.8 (5.8-15.7)", rotation angle = 0
  Source aperture counts = 69.1 +/- 14.3
  Background aperture counts = 105.9
  Rate = 0.001 +/- 0.0002

[Fri May 31 22:28:45 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:45 2013] Using photon index=1.80, rate=0.000863, arf fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src27.arf
[Fri May 31 22:28:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:45 2013] Updating source flux to 2.1e-14
[Fri May 31 22:29:01 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 31 22:29:07 2013] xmm0505400101/analysis//spectral/fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete