[Fri May 31 21:13:51 2013] Detection parameters:
  Position = (315.1, 336.2) = 1 39 56.51 6 21 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.2 +/- 10.6
  Background counts = 28.6
  Rate = 0.0008 +/- 0.0002

[Fri May 31 21:13:53 2013] Off-axis axis estimate = 2.99'
[Fri May 31 21:14:43 2013] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:43 2013] Initial guess for spatial extent in simple fitting = 7.92"
[Fri May 31 21:14:43 2013] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.881
[Fri May 31 21:14:43 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 7.92"
[Fri May 31 21:14:45 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src43.ximg exists
[Fri May 31 21:14:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src43.csv
[Fri May 31 21:14:45 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri May 31 21:14:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src43.csv
[Fri May 31 21:14:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:14:45 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri May 31 21:14:45 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri May 31 21:14:45 2013] Fit fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Fri May 31 21:15:14 2013] Warning, spatial fit 43 centroid is now closest to src. 23
[Fri May 31 21:15:14 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:14 2013] Assessing source extent using major
[Fri May 31 21:15:14 2013] Source does appear to be extended
[Fri May 31 21:15:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:15:55 2013] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:15:55 2013] Initial guess for spatial extent in simple fitting = 7.92"
[Fri May 31 21:15:55 2013] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.881
[Fri May 31 21:15:55 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 7.92"
[Fri May 31 21:15:59 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src40.ximg exists
[Fri May 31 21:15:59 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri May 31 21:15:59 2013] Fit fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src40 appears to have run properly
[Fri May 31 21:16:00 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri May 31 21:16:00 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri May 31 21:16:00 2013] Fit fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Fri May 31 21:16:26 2013] Source 24 is offset by 5.370824 and -5.824463 pixels which is larger than
2 X fitted extent = 1.566317 x 1.566317, not incorporating fit results
[Fri May 31 21:16:26 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:26 2013] Assessing source extent using major
[Fri May 31 21:16:26 2013] Source does appear to be extended
[Fri May 31 21:16:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:17:32 2013] XMMSAS src. selection expression = ellipse(27363.867706, 29200.449707, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 21:17:32 2013] Not overwriting source region fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src24_src.reg
[Fri May 31 21:17:32 2013] Extracting stamp from image fullrun_mos1_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (278, 299) - (353, 374)
[Fri May 31 21:17:32 2013] XMMSAS bgd. selection expression = annulus(27363.867706, 29200.449707, 1087.500000, 2175.000000, X, Y) && !ellipse(25172.440760, 31662.190800, 377.740011, 377.740011, 0.000000, X, Y) && !ellipse(28392.559200, 29059.900600, 362.052010, 362.052010, 0.000000, X, Y) && !ellipse(24799.319000, 29025.839800, 438.904813, 253.202407, 14.343713, X, Y) && !ellipse(27584.718400, 27134.781400, 239.689607, 239.689607, 0.000000, X, Y)
[Fri May 31 21:17:32 2013] Writing fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src24.gif
[Fri May 31 21:25:52 2013] Mean detx,y = (2197.16, -1226.47) 
[Fri May 31 21:25:54 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 21:26:12 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 21:26:12 2013] Setting source spectrum file to fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri May 31 21:26:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri May 31 21:47:32 2013] Not generating rmf since there are only 45 counts
[Fri May 31 21:47:32 2013] rmf not generated due to insufficient counts
[Fri May 31 22:28:42 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:42 2013] Total counts from fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 249.00
[Fri May 31 22:28:43 2013] Total counts from fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src24_bgd.pi.gz = 1556.00
[Fri May 31 22:28:43 2013] Got source and background scale factors 1257296.000000, 10359832.000000
[Fri May 31 22:28:43 2013] User source parameters:
  Position = (315.1, 336.2) = 1 39 56.51 6 21 7.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 60.2 +/- 16.8
  Background aperture counts = 188.8
  Rate = 0.0009 +/- 0.0003

[Fri May 31 22:28:43 2013] Updating counts from extracted products
[Fri May 31 22:28:43 2013] Set source signif. to 60.16/13.74 = 4.38
[Fri May 31 22:28:45 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:45 2013] Using photon index=1.80, rate=0.000947, arf fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src24.arf
[Fri May 31 22:28:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:45 2013] Updating source flux to 1e-14
[Fri May 31 22:29:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 22:29:07 2013] xmm0505400101/analysis//spectral/fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete