[Fri May 31 21:13:51 2013] Detection parameters:
  Position = (411.4, 415.8) = 1 39 28.39 6 26 54.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.3 +/- 12.3
  Background counts = 27.0
  Rate = 0.001 +/- 0.0002

[Fri May 31 21:13:53 2013] Off-axis axis estimate = 11.81'
[Fri May 31 21:14:43 2013] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:14:43 2013] Initial guess for spatial extent in simple fitting = 12.34"
[Fri May 31 21:14:43 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.944
[Fri May 31 21:14:43 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 12.34"
[Fri May 31 21:14:44 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src33.ximg exists
[Fri May 31 21:14:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src33.csv
[Fri May 31 21:14:44 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri May 31 21:14:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src33.csv
[Fri May 31 21:14:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:14:45 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri May 31 21:14:45 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri May 31 21:14:45 2013] Fit fullrun_mos1_xmm0505400101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Fri May 31 21:15:14 2013] Source 18 is offset by -4.923839 and 2.465992 pixels which is larger than
2 X fitted extent = 1.359145 x 1.359145, not incorporating fit results
[Fri May 31 21:15:14 2013] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 15.878672 pixels away
[Fri May 31 21:15:14 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:15:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:15:14 2013] Assessing source extent using major
[Fri May 31 21:15:14 2013] Source does appear to be extended
[Fri May 31 21:15:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:15:55 2013] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:15:55 2013] Initial guess for spatial extent in simple fitting = 12.34"
[Fri May 31 21:15:55 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.944
[Fri May 31 21:15:55 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 12.34"
[Fri May 31 21:15:59 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src31.ximg exists
[Fri May 31 21:15:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src31.csv
[Fri May 31 21:15:59 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri May 31 21:15:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src31.csv
[Fri May 31 21:15:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:16:00 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri May 31 21:16:00 2013] fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri May 31 21:16:00 2013] Fit fullrun_mos1_xmm0505400101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Fri May 31 21:16:26 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 11.881608 pixels away
[Fri May 31 21:16:26 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 15.878672 pixels away
[Fri May 31 21:16:26 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:16:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:16:26 2013] Assessing source extent using major
[Fri May 31 21:16:26 2013] Source does appear to be extended
[Fri May 31 21:16:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:17:32 2013] XMMSAS src. selection expression = ellipse(35747.589996, 36129.505341, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 21:17:32 2013] Not overwriting source region fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src18_src.reg
[Fri May 31 21:17:32 2013] Extracting stamp from image fullrun_mos1_xmm0505400101_pi300-10000_cl_sm2.00.img.gz, (374, 378) - (449, 453)
[Fri May 31 21:17:32 2013] XMMSAS bgd. selection expression = annulus(35747.589996, 36129.505341, 1087.500000, 2175.000000, X, Y) && !ellipse(35274.365540, 34866.632690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36059.218750, 38870.828400, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 21:17:32 2013] Writing fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src18.gif
[Fri May 31 21:22:29 2013] Mean detx,y = (11630.48, 4165.04) 
[Fri May 31 21:22:31 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 21:22:47 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 21:22:47 2013] Setting source spectrum file to fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri May 31 21:22:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri May 31 21:46:35 2013] Not generating rmf since there are only 69 counts
[Fri May 31 21:46:35 2013] rmf not generated due to insufficient counts
[Fri May 31 22:28:40 2013] Updating aperture counts using extracted products
[Fri May 31 22:28:40 2013] Total counts from fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 261.00
[Fri May 31 22:28:40 2013] Total counts from fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 1178.00
[Fri May 31 22:28:40 2013] Got source and background scale factors 1293784.000000, 8847845.000000
[Fri May 31 22:28:40 2013] User source parameters:
  Position = (411.4, 415.8) = 1 39 28.39 6 26 54.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 88.7 +/- 17.2
  Background aperture counts = 172.3
  Rate = 0.001 +/- 0.0003

[Fri May 31 22:28:40 2013] Updating counts from extracted products
[Fri May 31 22:28:40 2013] Set source signif. to 88.75/13.12 = 6.76
[Fri May 31 22:28:45 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 22:28:45 2013] Using photon index=1.80, rate=0.0014, arf fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src18.arf
[Fri May 31 22:28:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 22:28:45 2013] Updating source flux to 2.8e-14
[Fri May 31 22:29:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 22:29:07 2013] xmm0505400101/analysis//spectral/fullrun_mos1_xmm0505400101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete