[Wed Mar 28 06:16:10 2012] Detection parameters:
  Position = (305.7, 323.2) = 23 26 7.88 -55 44 40.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.1 +/- 17.0
  Background counts = 9.7
  Rate = 0.03 +/- 0.003

[Wed Mar 28 06:16:11 2012] Off-axis axis estimate = 1.87'
[Wed Mar 28 06:18:05 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 06:18:05 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Wed Mar 28 06:18:05 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.040
[Wed Mar 28 06:18:05 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.36"
[Wed Mar 28 06:50:01 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_src3.ximg exists
[Wed Mar 28 06:50:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_src3.csv
[Wed Mar 28 06:50:01 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Mar 28 06:50:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_src3.csv
[Wed Mar 28 06:50:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 06:50:01 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Mar 28 06:50:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Mar 28 06:50:01 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Mar 28 06:50:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Mar 28 06:50:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 07:24:24 2012] Source 4 is offset by 7.459440 and 5.944182 pixels which is larger than
2 X fitted extent = 0.846322 x 0.846322, not incorporating fit results
[Wed Mar 28 07:24:24 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 07:24:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 07:24:24 2012] Assessing source extent using major
[Wed Mar 28 07:24:24 2012] Source does appear to be extended
[Wed Mar 28 07:24:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 07:24:34 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 07:24:34 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Wed Mar 28 07:24:34 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.040
[Wed Mar 28 07:24:34 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.36"
[Wed Mar 28 07:52:02 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_src3.ximg exists
[Wed Mar 28 07:52:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_src3.csv
[Wed Mar 28 07:52:02 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Mar 28 07:52:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_src3.csv
[Wed Mar 28 07:52:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 07:52:02 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Mar 28 07:52:02 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Mar 28 07:52:02 2012] Fit fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Mar 28 08:32:41 2012] Spatial fit model total counts = 222.167000, observed total counts = 220.000000
[Wed Mar 28 08:32:41 2012] Offset between fit and detection position for source 4 = 0.240788 pixels
[Wed Mar 28 08:32:41 2012] 221.363700 total counts/ 74.763700 bgd. counts: snr = 16.954640
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.240788 pixels
  Position = (305.7, 323.4) = 23 26 7.90 -55 44 41.6
  Extent = 5.3 (4.7-6.3)", rotation angle = 0
  Source counts = 146.6 +/- 14.9
  Background counts = 74.8
  Rate = 0.02 +/- 0.002
[Wed Mar 28 08:32:41 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 08:32:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 08:32:41 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 08:32:41 2012] Source does appear to be extended
[Wed Mar 28 08:32:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 08:32:58 2012] XMMSAS src. selection expression = ellipse(26543.919000, 28088.399400, 318.332090, 318.332090, 0.000000, X, Y)
[Wed Mar 28 08:32:58 2012] Writing source region out to fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src4_src.reg
[Wed Mar 28 08:32:58 2012] Extracting stamp from image fullrun_pn_xmm0505384801_pi300-10000_cl_sm2.00.img.gz, (287, 305) - (324, 342)
[Wed Mar 28 08:32:58 2012] XMMSAS bgd. selection expression = annulus(26543.919000, 28088.399400, 530.553484, 1061.106967, X, Y) && !ellipse(26184.386600, 26733.468600, 361.324810, 194.483206, 317.796000, X, Y)
[Wed Mar 28 08:32:58 2012] Writing fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src4.gif
[Wed Mar 28 08:35:31 2012] Mean detx,y = (-1421.17, -757.16) 
[Wed Mar 28 08:35:33 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 08:35:54 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 08:35:55 2012] Setting source spectrum file to fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 28 08:35:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Mar 28 08:57:14 2012] Updating aperture counts using extracted products
[Wed Mar 28 08:57:14 2012] Error reading totcts from fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 28 08:57:15 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 08:57:15 2012] Using photon index=1.80, rate=0.0173, arf fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src4.arf
[Wed Mar 28 08:57:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 08:57:15 2012] Updating source flux to 6.5e-14
[Wed Mar 28 08:57:22 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Wed Mar 28 08:57:35 2012] Reading fit data from xmm0505384801/analysis//spectral/fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src4_pl.csv
[Wed Mar 28 08:57:35 2012] Spectral fit parameter nH value = 3.19659e+14
[Wed Mar 28 08:57:35 2012] Spectral fit parameter PhoIndex value = 2.24956
[Wed Mar 28 08:57:35 2012] Failed to get F(0.3-8.0) from xmm0505384801/analysis//spectral/fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Wed Mar 28 08:57:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 08:57:35 2012] Using Nh = 3.2e+14, photon index=2.25, rate=0.0173, arf fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src4.arf
[Wed Mar 28 08:57:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 08:57:35 2012] Updating source flux to 4.9e-14