[Wed Mar 28 06:16:11 2012] Detection parameters:
  Position = (414.3, 219.0) = 23 25 11.73 -55 52 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.8 +/- 9.8
  Background counts = 9.4
  Rate = 0.006 +/- 0.001

[Wed Mar 28 06:16:11 2012] Off-axis axis estimate = 10.18'
[Wed Mar 28 06:18:05 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 06:18:05 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Wed Mar 28 06:18:05 2012] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.883
[Wed Mar 28 06:18:05 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.52"
[Wed Mar 28 06:50:01 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_src9.ximg exists
[Wed Mar 28 06:50:01 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Mar 28 06:50:01 2012] Fit fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_src9 appears to have run properly
[Wed Mar 28 06:50:01 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Mar 28 06:50:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Mar 28 06:50:01 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Mar 28 06:50:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Mar 28 06:50:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 07:24:24 2012] Source 10 is offset by 2.822499 and -6.805781 pixels which is larger than
2 X fitted extent = 4.164989 x 0.801402, not incorporating fit results
[Wed Mar 28 07:24:24 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 07:24:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 07:24:24 2012] Assessing source extent using major
[Wed Mar 28 07:24:24 2012] Source does appear to be extended
[Wed Mar 28 07:24:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 07:24:34 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 07:24:34 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Wed Mar 28 07:24:34 2012] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.883
[Wed Mar 28 07:24:34 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.52"
[Wed Mar 28 07:52:02 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_src9.ximg exists
[Wed Mar 28 07:52:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_src9.csv
[Wed Mar 28 07:52:02 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Mar 28 07:52:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_src9.csv
[Wed Mar 28 07:52:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 07:52:02 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Mar 28 07:52:02 2012] fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Mar 28 07:52:02 2012] Fit fullrun_pn_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Mar 28 08:32:41 2012] Spatial fit model total counts = 150.777000, observed total counts = 139.000000
[Wed Mar 28 08:32:41 2012] Offset between fit and detection position for source 10 = 0.313929 pixels
[Wed Mar 28 08:32:41 2012] 150.553300 total counts/ 99.494100 bgd. counts: snr = 5.118885
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.313929 pixels
  Position = (414.0, 219.0) = 23 25 11.90 -55 52 15.0
  Extent = 8.0 (5.5-10.9)", rotation angle = 0
  Source counts = 51.1 +/- 12.3
  Background counts = 99.5
  Rate = 0.006 +/- 0.001
[Wed Mar 28 08:32:41 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 08:32:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 08:32:41 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 08:32:41 2012] Source does appear to be extended
[Wed Mar 28 08:32:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 08:32:58 2012] XMMSAS src. selection expression = ellipse(35968.269330, 19001.960600, 477.709214, 477.709214, 0.000000, X, Y)
[Wed Mar 28 08:32:58 2012] Writing source region out to fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src10_src.reg
[Wed Mar 28 08:32:58 2012] Extracting stamp from image fullrun_pn_xmm0505384801_pi300-10000_cl_sm2.00.img.gz, (387, 192) - (441, 246)
[Wed Mar 28 08:32:58 2012] XMMSAS bgd. selection expression = annulus(35968.269330, 19001.960600, 796.182023, 1592.364046, X, Y)
[Wed Mar 28 08:32:58 2012] Writing fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src10.gif
[Wed Mar 28 08:38:36 2012] Mean detx,y = (10943.71, 3465.45) 
[Wed Mar 28 08:38:38 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 08:38:51 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 08:38:52 2012] Setting source spectrum file to fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Mar 28 08:38:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Mar 28 08:47:58 2012] Not generating rmf since there are only 51 counts
[Wed Mar 28 08:47:58 2012] rmf not generated due to insufficient counts
[Wed Mar 28 08:57:14 2012] Updating aperture counts using extracted products
[Wed Mar 28 08:57:14 2012] Error reading totcts from fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Mar 28 08:57:15 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 08:57:15 2012] Using photon index=1.80, rate=0.00602, arf fullrun_pn_xmm0505384801_pi300-10000_pass1_cl_src10.arf
[Wed Mar 28 08:57:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 08:57:15 2012] Updating source flux to 2.9e-14
[Wed Mar 28 08:57:22 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Wed Mar 28 08:57:22 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting