[Wed Mar 28 06:16:53 2012] Detection parameters:
  Position = (160.9, 333.9) = 23 27 22.43 -55 43 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.3 +/- 7.5
  Background counts = 2.9
  Rate = 0.003 +/- 0.0007

[Wed Mar 28 06:16:53 2012] Off-axis axis estimate = 10.29'
[Wed Mar 28 07:07:01 2012] Using EEF radius (= 11.58 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 07:07:01 2012] Initial guess for spatial extent in simple fitting = 11.58"
[Wed Mar 28 07:07:01 2012] source mask rpix=2.7, npix_max = 39, mask sum = 35, frac = 0.876
[Wed Mar 28 07:07:01 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.58"
[Wed Mar 28 07:24:19 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_src7.ximg exists
[Wed Mar 28 07:24:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_src7.csv
[Wed Mar 28 07:24:19 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Mar 28 07:24:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_src7.csv
[Wed Mar 28 07:24:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 07:24:20 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Mar 28 07:24:20 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Mar 28 07:24:20 2012] Fit fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Mar 28 07:24:28 2012] Spatial fit model total counts = 55.638300, observed total counts = 55.000000
[Wed Mar 28 07:24:28 2012] Offset between fit and detection position for source 6 = 0.028289 pixels
[Wed Mar 28 07:24:28 2012] 53.952200 total counts/ 30.288600 bgd. counts: snr = 4.299730
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.028289 pixels
  Position = (160.9, 333.9) = 23 27 22.45 -55 43 54.7
  Extent = 5.8 (4.0-9.2)", rotation angle = 0
  Source counts = 23.7 +/- 7.3
  Background counts = 30.3
  Rate = 0.002 +/- 0.0007
[Wed Mar 28 07:24:28 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 07:24:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 07:24:28 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 07:24:28 2012] Source does appear to be extended
[Wed Mar 28 07:24:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 08:11:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 28 08:11:52 2012] Initial guess for spatial extent in simple fitting = 5.85"
[Wed Mar 28 08:11:52 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.176
[Wed Mar 28 08:11:52 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 5.85"
[Wed Mar 28 08:32:36 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_src7.ximg exists
[Wed Mar 28 08:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_src7.csv
[Wed Mar 28 08:32:36 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Mar 28 08:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_src7.csv
[Wed Mar 28 08:32:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 08:32:36 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Mar 28 08:32:36 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Mar 28 08:32:36 2012] Fit fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Mar 28 08:32:47 2012] Warning, spatial fit 7 centroid is now closest to src. 9
[Wed Mar 28 08:32:47 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 08:32:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 08:32:47 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 08:32:47 2012] Source does appear to be extended
[Wed Mar 28 08:32:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 08:52:17 2012] XMMSAS src. selection expression = ellipse(13951.414400, 29000.067880, 350.881210, 350.881210, 0.000000, X, Y)
[Wed Mar 28 08:52:17 2012] Writing source region out to fullrun_mos2_xmm0505384801_pi300-10000_pass1_cl_src6_src.reg
[Wed Mar 28 08:52:17 2012] Extracting stamp from image fullrun_mos2_xmm0505384801_pi300-10000_cl_sm2.00.img.gz, (141, 314) - (181, 354)
[Wed Mar 28 08:52:17 2012] XMMSAS bgd. selection expression = annulus(13951.414400, 29000.067880, 584.802017, 1169.604034, X, Y)
[Wed Mar 28 08:52:17 2012] Writing fullrun_mos2_xmm0505384801_pi300-10000_pass1_cl_src6.gif
[Wed Mar 28 08:54:28 2012] Mean detx,y = (13317.38, -4024.76) 
[Wed Mar 28 08:54:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 08:54:36 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 08:54:37 2012] Setting source spectrum file to fullrun_mos2_xmm0505384801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Mar 28 08:54:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505384801_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Mar 28 08:56:31 2012] Not generating rmf since there are only 23 counts
[Wed Mar 28 08:56:31 2012] rmf not generated due to insufficient counts
[Wed Mar 28 08:57:17 2012] Updating aperture counts using extracted products
[Wed Mar 28 08:57:17 2012] Error reading totcts from fullrun_mos2_xmm0505384801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Mar 28 08:57:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 08:57:18 2012] Using photon index=1.80, rate=0.00236, arf fullrun_mos2_xmm0505384801_pi300-10000_pass1_cl_src6.arf
[Wed Mar 28 08:57:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 08:57:18 2012] Updating source flux to 7.5e-14
[Wed Mar 28 08:57:21 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Mar 28 08:57:22 2012] xmm0505384801/analysis//spectral/fullrun_mos2_xmm0505384801_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete