[Wed Mar 28 06:16:53 2012] Detection parameters:
  Position = (421.5, 466.7) = 23 25 8.49 -55 34 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.1 +/- 7.0
  Background counts = 2.8
  Rate = 0.002 +/- 0.0007

[Wed Mar 28 06:16:53 2012] Off-axis axis estimate = 15.11'
[Wed Mar 28 07:07:01 2012] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 07:07:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 07:07:01 2012] Initial guess for spatial extent in simple fitting = 13.99"
[Wed Mar 28 07:07:01 2012] source mask rpix=3.2, npix_max = 55, mask sum = 46, frac = 0.833
[Wed Mar 28 07:07:01 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.99"
[Wed Mar 28 07:24:19 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_src11.ximg exists
[Wed Mar 28 07:24:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_src11.csv
[Wed Mar 28 07:24:19 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Mar 28 07:24:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_src11.csv
[Wed Mar 28 07:24:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 07:24:20 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Mar 28 07:24:20 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Mar 28 07:24:20 2012] Fit fullrun_mos2_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Mar 28 07:24:28 2012] Warning, spatial fit 11 centroid is now closest to src. 3
[Wed Mar 28 07:24:28 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 07:24:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 07:24:28 2012] Assessing source extent using major
[Wed Mar 28 07:24:28 2012] Source does appear to be extended
[Wed Mar 28 07:24:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 07:24:28 2012] Source is confused with source 3
[Wed Mar 28 08:11:52 2012] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 08:11:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 08:11:52 2012] Initial guess for spatial extent in simple fitting = 13.99"
[Wed Mar 28 08:11:52 2012] source mask rpix=3.2, npix_max = 55, mask sum = 46, frac = 0.833
[Wed Mar 28 08:11:52 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 13.99"
[Wed Mar 28 08:32:36 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_src11.ximg exists
[Wed Mar 28 08:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_src11.csv
[Wed Mar 28 08:32:36 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Mar 28 08:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_src11.csv
[Wed Mar 28 08:32:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 08:32:36 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Mar 28 08:32:36 2012] fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Mar 28 08:32:36 2012] Fit fullrun_mos2_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Mar 28 08:32:47 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 100.013908 pixels away
[Wed Mar 28 08:32:47 2012] Spatial fit model total counts = 91.614500, observed total counts = 84.000000
[Wed Mar 28 08:32:47 2012] Offset between fit and detection position for source 11 = 2.900679 pixels
[Wed Mar 28 08:32:47 2012] 87.992100 total counts/ 21.959000 bgd. counts: snr = 14.091441
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 2.900679 pixels
  Position = (421.0, 463.8) = 23 25 8.76 -55 34 29.7
  Extent = 13.8 (11.5-18.7)", rotation angle = 0
  Source counts = 66.0 +/- 9.4
  Background counts = 22.0
  Rate = 0.007 +/- 0.0009
[Wed Mar 28 08:32:47 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 08:32:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 08:32:47 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 08:32:47 2012] Source does appear to be extended
[Wed Mar 28 08:32:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 08:52:17 2012] XMMSAS src. selection expression = ellipse(36576.683346, 40305.256000, 825.576024, 825.576024, 0.000000, X, Y)
[Wed Mar 28 08:52:17 2012] Writing source region out to fullrun_mos2_xmm0505384801_pi300-10000_pass1_cl_src11_src.reg
[Wed Mar 28 08:52:17 2012] Extracting stamp from image fullrun_mos2_xmm0505384801_pi300-10000_cl_sm2.00.img.gz, (374, 416) - (468, 511)
[Wed Mar 28 08:52:17 2012] XMMSAS bgd. selection expression = annulus(36576.683346, 40305.256000, 1375.960040, 2751.920079, X, Y) && !ellipse(36528.115200, 40330.777400, 911.384026, 911.384026, 0.000000, X, Y)
[Wed Mar 28 08:52:17 2012] Writing fullrun_mos2_xmm0505384801_pi300-10000_pass1_cl_src11.gif
[Wed Mar 28 08:55:38 2012] Mean detx,y = (-2095.24, 16010.50) 
[Wed Mar 28 08:55:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 08:56:05 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 08:56:05 2012] Setting source spectrum file to fullrun_mos2_xmm0505384801_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Mar 28 08:56:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505384801_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Mar 28 08:56:47 2012] Not generating rmf since there are only 66 counts
[Wed Mar 28 08:56:47 2012] rmf not generated due to insufficient counts
[Wed Mar 28 08:57:17 2012] Updating aperture counts using extracted products
[Wed Mar 28 08:57:17 2012] Error reading totcts from fullrun_mos2_xmm0505384801_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Mar 28 08:57:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 08:57:18 2012] Using photon index=1.80, rate=0.00657, arf fullrun_mos2_xmm0505384801_pi300-10000_pass1_cl_src11.arf
[Wed Mar 28 08:57:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 08:57:18 2012] Updating source flux to 1.9e-13
[Wed Mar 28 08:57:21 2012] Flag c found in src. 11 procflags, skipping spectral fitting
[Wed Mar 28 08:57:21 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Mar 28 08:57:22 2012] xmm0505384801/analysis//spectral/fullrun_mos2_xmm0505384801_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete