[Wed Mar 28 06:16:32 2012] Detection parameters:
  Position = (421.1, 463.0) = 23 25 8.71 -55 34 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.1 +/- 6.9
  Background counts = 3.2
  Rate = 0.003 +/- 0.0007

[Wed Mar 28 06:16:32 2012] Off-axis axis estimate = 14.88'
[Wed Mar 28 06:50:01 2012] Using EEF radius (= 13.87 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 06:50:01 2012] Initial guess for spatial extent in simple fitting = 13.87"
[Wed Mar 28 06:50:01 2012] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.176
[Wed Mar 28 06:50:01 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 13.87"
[Wed Mar 28 07:07:01 2012] fullrun_mos1_xmm0505384801_pi300-10000_cl_pass0_src9.ximg exists
[Wed Mar 28 07:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505384801_pi300-10000_cl_pass0_src9.csv
[Wed Mar 28 07:07:01 2012] fullrun_mos1_xmm0505384801_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Mar 28 07:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505384801_pi300-10000_cl_pass0_src9.csv
[Wed Mar 28 07:07:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505384801_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505384801_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 07:07:01 2012] fullrun_mos1_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Mar 28 07:07:01 2012] fullrun_mos1_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Mar 28 07:07:01 2012] Fit fullrun_mos1_xmm0505384801_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Mar 28 07:24:26 2012] Spatial fit model total counts = 69.262600, observed total counts = 69.000000
[Wed Mar 28 07:24:26 2012] Offset between fit and detection position for source 6 = 1.279154 pixels
[Wed Mar 28 07:24:26 2012] 68.837100 total counts/ 36.874000 bgd. counts: snr = 5.263671
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.279154 pixels
  Position = (420.5, 464.2) = 23 25 9.01 -55 34 28.3
  Extent = 9.9 (6.9-15.8)", rotation angle = 0
  Source counts = 32.0 +/- 8.3
  Background counts = 36.9
  Rate = 0.003 +/- 0.0008
[Wed Mar 28 07:24:26 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 07:24:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 07:24:26 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 07:24:26 2012] Source does appear to be extended
[Wed Mar 28 07:24:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 07:52:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 28 07:52:02 2012] Initial guess for spatial extent in simple fitting = 9.89"
[Wed Mar 28 07:52:02 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.975
[Wed Mar 28 07:52:02 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 9.89"
[Wed Mar 28 08:11:52 2012] fullrun_mos1_xmm0505384801_pi300-10000_cl_pass1_src9.ximg exists
[Wed Mar 28 08:11:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505384801_pi300-10000_cl_pass1_src9.csv
[Wed Mar 28 08:11:52 2012] fullrun_mos1_xmm0505384801_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Mar 28 08:11:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505384801_pi300-10000_cl_pass1_src9.csv
[Wed Mar 28 08:11:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505384801_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505384801_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 08:11:52 2012] fullrun_mos1_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Mar 28 08:11:52 2012] fullrun_mos1_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Mar 28 08:11:52 2012] Fit fullrun_mos1_xmm0505384801_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Mar 28 08:32:44 2012] Warning, spatial fit 9 centroid is now closest to src. 11
[Wed Mar 28 08:32:44 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 08:32:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 08:32:44 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 08:32:44 2012] Source does appear to be extended
[Wed Mar 28 08:32:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 08:49:39 2012] XMMSAS src. selection expression = ellipse(36534.128854, 40333.764600, 593.440217, 593.440217, 0.000000, X, Y)
[Wed Mar 28 08:49:39 2012] Writing source region out to fullrun_mos1_xmm0505384801_pi300-10000_pass1_cl_src6_src.reg
[Wed Mar 28 08:49:39 2012] Extracting stamp from image fullrun_mos1_xmm0505384801_pi300-10000_cl_sm2.00.img.gz, (386, 430) - (455, 498)
[Wed Mar 28 08:49:39 2012] XMMSAS bgd. selection expression = annulus(36534.128854, 40333.764600, 989.067028, 1978.134057, X, Y)
[Wed Mar 28 08:49:39 2012] Writing fullrun_mos1_xmm0505384801_pi300-10000_pass1_cl_src6.gif
[Wed Mar 28 08:51:00 2012] Mean detx,y = (16156.70, 2031.68) 
[Wed Mar 28 08:51:01 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 08:51:15 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 08:51:15 2012] Setting source spectrum file to fullrun_mos1_xmm0505384801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Mar 28 08:51:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505384801_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Mar 28 08:52:04 2012] Not generating rmf since there are only 31 counts
[Wed Mar 28 08:52:04 2012] rmf not generated due to insufficient counts
[Wed Mar 28 08:57:16 2012] Updating aperture counts using extracted products
[Wed Mar 28 08:57:16 2012] Error reading totcts from fullrun_mos1_xmm0505384801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Mar 28 08:57:16 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 08:57:16 2012] Using photon index=1.80, rate=0.00319, arf fullrun_mos1_xmm0505384801_pi300-10000_pass1_cl_src6.arf
[Wed Mar 28 08:57:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 08:57:16 2012] Updating source flux to 8.6e-14
[Wed Mar 28 08:57:20 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Mar 28 08:57:21 2012] xmm0505384801/analysis//spectral/fullrun_mos1_xmm0505384801_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete