[Sun Apr 29 04:14:10 2012] Detection parameters:
  Position = (290.0, 433.8) = 23 31 36.60 -54 5 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19.4 +/- 5.9
  Background counts = 4.0
  Rate = 0.001 +/- 0.0005

[Sun Apr 29 04:14:10 2012] Off-axis axis estimate = 9.83'
[Sun Apr 29 04:33:05 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 04:33:05 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Sun Apr 29 04:33:05 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Sun Apr 29 04:33:05 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.34"
[Sun Apr 29 04:42:43 2012] fullrun_mos1_xmm0505384101_pi300-10000_cl_pass0_src9.ximg exists
[Sun Apr 29 04:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505384101_pi300-10000_cl_pass0_src9.csv
[Sun Apr 29 04:42:43 2012] fullrun_mos1_xmm0505384101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Apr 29 04:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505384101_pi300-10000_cl_pass0_src9.csv
[Sun Apr 29 04:42:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505384101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505384101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 04:42:43 2012] fullrun_mos1_xmm0505384101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Apr 29 04:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505384101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Apr 29 04:42:43 2012] fullrun_mos1_xmm0505384101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Apr 29 04:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505384101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Apr 29 04:42:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505384101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505384101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 04:56:19 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.946698 pixels away
[Sun Apr 29 04:56:19 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 04:56:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 04:56:19 2012] Assessing source extent using major
[Sun Apr 29 04:56:19 2012] Source does appear to be extended
[Sun Apr 29 04:56:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 05:13:07 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 05:13:07 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Sun Apr 29 05:13:07 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Sun Apr 29 05:13:07 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.34"
[Sun Apr 29 05:23:36 2012] fullrun_mos1_xmm0505384101_pi300-10000_cl_pass1_src9.ximg exists
[Sun Apr 29 05:23:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505384101_pi300-10000_cl_pass1_src9.csv
[Sun Apr 29 05:23:36 2012] fullrun_mos1_xmm0505384101_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Apr 29 05:23:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505384101_pi300-10000_cl_pass1_src9.csv
[Sun Apr 29 05:23:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505384101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505384101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 05:23:36 2012] fullrun_mos1_xmm0505384101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Apr 29 05:23:36 2012] fullrun_mos1_xmm0505384101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Apr 29 05:23:36 2012] Fit fullrun_mos1_xmm0505384101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Apr 29 05:37:16 2012] Spatial fit model total counts = 64.657300, observed total counts = 59.000000
[Sun Apr 29 05:37:16 2012] Offset between fit and detection position for source 2 = 0.466335 pixels
[Sun Apr 29 05:37:16 2012] 67.121710 total counts/ 58.397300 bgd. counts: snr = 1.141668
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.466335 pixels
  Position = (290.1, 434.2) = 23 31 36.59 -54 5 23.0
  Extent = 2.8" x 2.8", rotation angle = 0
  Source counts = 8.7 +/- 8.2
  Background counts = 58.4
  Rate = 0.0007 +/- 0.0006
  Deleting source due to low Poisson probability