[Fri Feb 17 22:21:15 2012] Detection parameters:
  Position = (464.2, 339.9) = 23 27 34.45 -54 12 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.6 +/- 7.5
  Background counts = 3.9
  Rate = 0.003 +/- 0.0006

[Fri Feb 17 22:21:15 2012] Off-axis axis estimate = 12.39'
[Fri Feb 17 23:04:17 2012] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 23:04:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 23:04:17 2012] Initial guess for spatial extent in simple fitting = 12.62"
[Fri Feb 17 23:04:17 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.059
[Fri Feb 17 23:04:17 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.62"
[Fri Feb 17 23:25:18 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src11.ximg exists
[Fri Feb 17 23:25:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src11.csv
[Fri Feb 17 23:25:18 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Feb 17 23:25:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src11.csv
[Fri Feb 17 23:25:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 23:25:18 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Feb 17 23:25:18 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Feb 17 23:25:18 2012] Fit fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Feb 17 23:25:28 2012] Spatial fit model total counts = 69.992700, observed total counts = 70.000000
[Fri Feb 17 23:25:28 2012] Offset between fit and detection position for source 8 = 0.221248 pixels
[Fri Feb 17 23:25:28 2012] 70.036900 total counts/ 49.226100 bgd. counts: snr = 2.966136
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.221248 pixels
  Position = (464.0, 340.0) = 23 27 34.56 -54 12 12.8
  Extent = 5.4 (3.8-10.5)", rotation angle = 0
  Source counts = 20.8 +/- 8.4
  Background counts = 49.2
  Rate = 0.002 +/- 0.0007
[Fri Feb 17 23:25:28 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 23:25:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 23:25:28 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 23:25:28 2012] Source does appear to be extended
[Fri Feb 17 23:25:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 00:03:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 00:03:59 2012] Initial guess for spatial extent in simple fitting = 5.40"
[Sat Feb 18 00:03:59 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.319
[Sat Feb 18 00:03:59 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 5.40"
[Sat Feb 18 00:24:48 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src11.ximg exists
[Sat Feb 18 00:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src11.csv
[Sat Feb 18 00:24:48 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Feb 18 00:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src11.csv
[Sat Feb 18 00:24:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 00:24:48 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Feb 18 00:24:48 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Feb 18 00:24:48 2012] Fit fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Feb 18 00:24:58 2012] Warning, spatial fit 11 centroid is now closest to src. 13
[Sat Feb 18 00:24:58 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 00:24:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 00:24:58 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 00:24:58 2012] Source does appear to be extended
[Sat Feb 18 00:24:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 00:47:08 2012] XMMSAS src. selection expression = ellipse(40316.897400, 29527.694400, 323.944809, 323.944809, 0.000000, X, Y)
[Sat Feb 18 00:47:08 2012] Writing source region out to fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src8_src.reg
[Sat Feb 18 00:47:08 2012] Extracting stamp from image fullrun_mos2_xmm0505384001_pi300-10000_cl_sm2.00.img.gz, (445, 321) - (483, 359)
[Sat Feb 18 00:47:08 2012] XMMSAS bgd. selection expression = annulus(40316.897400, 29527.694400, 539.908016, 1079.816031, X, Y)
[Sat Feb 18 00:47:08 2012] Writing fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src8.gif
[Sat Feb 18 00:49:10 2012] Mean detx,y = (-9850.38, 8286.55) 
[Sat Feb 18 00:49:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 00:49:18 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 00:49:18 2012] Setting source spectrum file to fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Feb 18 00:49:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Feb 18 00:54:41 2012] Not generating rmf since there are only 20 counts
[Sat Feb 18 00:54:41 2012] rmf not generated due to insufficient counts
[Sat Feb 18 00:55:30 2012] Updating aperture counts using extracted products
[Sat Feb 18 00:55:30 2012] Error reading totcts from fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Feb 18 00:55:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 00:55:30 2012] Using photon index=1.80, rate=0.00168, arf fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src8.arf
[Sat Feb 18 00:55:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 00:55:30 2012] Updating source flux to 5.1e-14
[Sat Feb 18 00:55:37 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting