[Fri Feb 17 22:21:15 2012] Detection parameters:
  Position = (266.7, 174.2) = 23 29 12.42 -54 24 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.6 +/- 9.6
  Background counts = 4.8
  Rate = 0.009 +/- 0.001

[Fri Feb 17 22:21:15 2012] Off-axis axis estimate = 9.30'
[Fri Feb 17 23:04:17 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 23:04:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 23:04:17 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Fri Feb 17 23:04:17 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Fri Feb 17 23:04:17 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.08"
[Fri Feb 17 23:25:18 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src2.ximg exists
[Fri Feb 17 23:25:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src2.csv
[Fri Feb 17 23:25:18 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Feb 17 23:25:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src2.csv
[Fri Feb 17 23:25:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 23:25:18 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Feb 17 23:25:18 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Feb 17 23:25:18 2012] Fit fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Feb 17 23:25:28 2012] Spatial fit model total counts = 91.999600, observed total counts = 92.000000
[Fri Feb 17 23:25:28 2012] Offset between fit and detection position for source 7 = 0.236325 pixels
[Fri Feb 17 23:25:28 2012] 94.920500 total counts/ 56.371100 bgd. counts: snr = 5.134396
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.236325 pixels
  Position = (266.5, 174.2) = 23 29 12.54 -54 24 15.4
  Extent = 4.6 (3.4-6.2)", rotation angle = 0
  Source counts = 38.5 +/- 9.7
  Background counts = 56.4
  Rate = 0.003 +/- 0.0008
[Fri Feb 17 23:25:28 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 23:25:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 23:25:28 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 23:25:28 2012] Source does appear to be extended
[Fri Feb 17 23:25:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 00:03:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 00:03:59 2012] Initial guess for spatial extent in simple fitting = 4.62"
[Sat Feb 18 00:03:59 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.923
[Sat Feb 18 00:03:59 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.62"
[Sat Feb 18 00:24:48 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src2.ximg exists
[Sat Feb 18 00:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src2.csv
[Sat Feb 18 00:24:48 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Feb 18 00:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src2.csv
[Sat Feb 18 00:24:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 00:24:48 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Feb 18 00:24:48 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Feb 18 00:24:48 2012] Fit fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Feb 18 00:24:58 2012] Spatial fit model total counts = 92.904500, observed total counts = 93.000000
[Sat Feb 18 00:24:58 2012] Offset between fit and detection position for source 7 = 0.006072 pixels
[Sat Feb 18 00:24:58 2012] 96.742400 total counts/ 58.729600 bgd. counts: snr = 4.960225
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.006072 pixels
  Position = (266.5, 174.2) = 23 29 12.54 -54 24 15.4
  Extent = 4.6 (3.4-6.0)", rotation angle = 0
  Source counts = 38.0 +/- 9.8
  Background counts = 58.7
  Rate = 0.003 +/- 0.0008
[Sat Feb 18 00:24:58 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 00:24:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 00:24:58 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 00:24:58 2012] Source does appear to be extended
[Sat Feb 18 00:24:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 00:47:08 2012] XMMSAS src. selection expression = ellipse(23137.387600, 15110.494800, 273.466208, 273.466208, 0.000000, X, Y)
[Sat Feb 18 00:47:08 2012] Writing source region out to fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src7_src.reg
[Sat Feb 18 00:47:08 2012] Extracting stamp from image fullrun_mos2_xmm0505384001_pi300-10000_cl_sm2.00.img.gz, (251, 159) - (282, 190)
[Sat Feb 18 00:47:08 2012] XMMSAS bgd. selection expression = annulus(23137.387600, 15110.494800, 455.777013, 911.554026, X, Y)
[Sat Feb 18 00:47:08 2012] Writing fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src7.gif
[Sat Feb 18 00:47:19 2012] Mean detx,y = (-1401.60, -12483.76) 
[Sat Feb 18 00:47:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 00:47:26 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 00:47:27 2012] Setting source spectrum file to fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Feb 18 00:47:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Feb 18 00:54:08 2012] Not generating rmf since there are only 38 counts
[Sat Feb 18 00:54:08 2012] rmf not generated due to insufficient counts
[Sat Feb 18 00:55:29 2012] Updating aperture counts using extracted products
[Sat Feb 18 00:55:29 2012] Error reading totcts from fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Feb 18 00:55:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 00:55:30 2012] Using photon index=1.80, rate=0.00306, arf fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src7.arf
[Sat Feb 18 00:55:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 00:55:30 2012] Updating source flux to 8.1e-14
[Sat Feb 18 00:55:37 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting