[Fri Feb 17 22:21:15 2012] Detection parameters:
  Position = (465.8, 223.0) = 23 27 33.38 -54 20 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.0 +/- 7.4
  Background counts = 4.0
  Rate = 0.002 +/- 0.0006

[Fri Feb 17 22:21:15 2012] Off-axis axis estimate = 13.31'
[Fri Feb 17 23:04:17 2012] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 23:04:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 23:04:17 2012] Initial guess for spatial extent in simple fitting = 13.08"
[Fri Feb 17 23:04:17 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.996
[Fri Feb 17 23:04:17 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 13.08"
[Fri Feb 17 23:25:18 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src13.ximg exists
[Fri Feb 17 23:25:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src13.csv
[Fri Feb 17 23:25:18 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Feb 17 23:25:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src13.csv
[Fri Feb 17 23:25:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 23:25:18 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Feb 17 23:25:18 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Feb 17 23:25:18 2012] Fit fullrun_mos2_xmm0505384001_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Feb 17 23:25:28 2012] Spatial fit model total counts = 90.936500, observed total counts = 91.000000
[Fri Feb 17 23:25:28 2012] Offset between fit and detection position for source 10 = 0.270767 pixels
[Fri Feb 17 23:25:28 2012] 91.355800 total counts/ 73.226500 bgd. counts: snr = 2.118590
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.270767 pixels
  Position = (465.6, 222.8) = 23 27 33.48 -54 20 42.3
  Extent = 5.9 (3.3-8.6)", rotation angle = 0
  Source counts = 18.1 +/- 9.6
  Background counts = 73.2
  Rate = 0.001 +/- 0.0008
[Fri Feb 17 23:25:28 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 23:25:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 23:25:28 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 23:25:28 2012] Source does appear to be extended
[Fri Feb 17 23:25:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 00:03:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 00:03:59 2012] Initial guess for spatial extent in simple fitting = 5.92"
[Sat Feb 18 00:03:59 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.866
[Sat Feb 18 00:03:59 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 5.92"
[Sat Feb 18 00:24:48 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src13.ximg exists
[Sat Feb 18 00:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src13.csv
[Sat Feb 18 00:24:48 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Feb 18 00:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src13.csv
[Sat Feb 18 00:24:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 00:24:48 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Feb 18 00:24:48 2012] fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Feb 18 00:24:48 2012] Fit fullrun_mos2_xmm0505384001_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Feb 18 00:24:58 2012] Spatial fit model total counts = 70.998400, observed total counts = 71.000000
[Sat Feb 18 00:24:58 2012] Offset between fit and detection position for source 10 = 0.056454 pixels
[Sat Feb 18 00:24:58 2012] 70.855000 total counts/ 53.020800 bgd. counts: snr = 2.449235
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.056454 pixels
  Position = (465.5, 222.9) = 23 27 33.50 -54 20 42.1
  Extent = 5.8 (1.5-9.0)", rotation angle = 0
  Source counts = 17.8 +/- 8.4
  Background counts = 53.0
  Rate = 0.001 +/- 0.0007
[Sat Feb 18 00:24:58 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 00:24:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 00:24:58 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 00:24:58 2012] Source does appear to be extended
[Sat Feb 18 00:24:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 00:47:08 2012] XMMSAS src. selection expression = ellipse(40451.953400, 19341.005740, 347.242810, 347.242810, 0.000000, X, Y)
[Sat Feb 18 00:47:08 2012] Writing source region out to fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src10_src.reg
[Sat Feb 18 00:47:08 2012] Extracting stamp from image fullrun_mos2_xmm0505384001_pi300-10000_cl_sm2.00.img.gz, (446, 203) - (485, 243)
[Sat Feb 18 00:47:08 2012] XMMSAS bgd. selection expression = annulus(40451.953400, 19341.005740, 578.738017, 1157.476033, X, Y)
[Sat Feb 18 00:47:08 2012] Writing fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src10.gif
[Sat Feb 18 00:49:29 2012] Mean detx,y = (-14752.57, -656.75) 
[Sat Feb 18 00:49:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 00:49:37 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 00:49:37 2012] Setting source spectrum file to fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Feb 18 00:49:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Feb 18 00:54:48 2012] Not generating rmf since there are only 17 counts
[Sat Feb 18 00:54:48 2012] rmf not generated due to insufficient counts
[Sat Feb 18 00:55:30 2012] Updating aperture counts using extracted products
[Sat Feb 18 00:55:30 2012] Error reading totcts from fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Feb 18 00:55:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 00:55:30 2012] Using photon index=1.80, rate=0.00144, arf fullrun_mos2_xmm0505384001_pi300-10000_pass1_cl_src10.arf
[Sat Feb 18 00:55:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 00:55:30 2012] Updating source flux to 3.7e-14
[Sat Feb 18 00:55:37 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting